Can a GTP supercharger be added to a 3800?

One of the most common questions in the 3800 market is “Can I bolt a GTP supercharger onto my GT (L36) engine. The short answer is no. The only things the non supercharged and supercharged 3800’s have in common are the block and crank. Everything else is different.

When to replace the intake manifold in a 3800?

Anyway, to make a long story short, if you have a 3800 engine that is sucking in antifreeze into the engine it’s a good chance the intake manifold needs to be replaced. In the event the engine hydro-locks I would suggest doing the head gaskets to clean things up and ensure everything is in order.

How old is the new Supercharged 3800 car?

Let’s be honest, the newest supercharged 3800 car is 10 years old now, the oldest is over 20.. most of them are going to be in various states of disrepair. You need to, at the very least, perform a basic tune-up and catch up on years of deferred maintenance.

When did the GM 3800 Series 2 engine come out?

The GM 3800 Series II engine, introduced in 1995, is quite a different engine from its predecessor, the Series I engine. While the stroke for the 3.8L engine remained at 3.4” (86 mm), and the bore remained at 3.8” (97 mm), the engine architecture changed dramatically.

What should I do to my supercharged 3800?

Lower intake manifold gaskets and coolant elbows if they haven’t been done (if you aren’t 100% sure, just do them). New spark plugs and wires. Oil change, preferably switch to synthetic and a quality filter. Fuel filter. Coolant Flush. There is no compelling reason to move away from Dexcool, don’t bother doing it. Transmission fluid and filter.

Where did the supercharged 3800 for Dummies come from?

Acknowledgements: The idea for this guide originated on GrandPrixForums in 2009 by Nick (blueguy), however, some parts of that guide have become outdated by losing various vendors, conducting better research, and finding betters ways of doing things.

When did the GM 3800 Series come out?

Whether you’re looking to learn more about engines and performance or just want to make your way to the grocery store faster, the GM 3800 platform offers an easy and cost-effective starting point. When it debuted in 1996, the Series II 3800 offered class-leading supercharged performance.

What are the internals of a Buick 3800?

This, of course, means that GM’s bean counters were in full effect in regards to the design of this transmission, and there were cost cutting measures taken. The internals of the 4T65E bolted to your 3800 are largely no different than the ones in a base Buick Century.

What kind of car does the L36 supercharger kit work on?

Most FWD Series 2 3800 with an L36. We’ve tested on Grand Prix, Impala, Bonneville and Monte Carlo. Gen 5 kits will be available shortly for use with drive by wir throttle bodies and newer cars. Will not work on RWD Firebirds or Camaros. 3. Won’t I have KR? Will my engine blow up?

Is the zzperformance supercharger kit a good buy?

The kit has been tested down to a 3.2″ pulley with 12 pounds of boost with the accessory belt being the only drive. ZZPerformance modular pulleys grip better than anything on the market thanks to their narrowed V-groove angle. The included idler pulley increases belt wrap for better grip.

When did the Buick 3800 Series 2 engine come out?

Introduced in 1995, the Series II is quite a different engine. It is also by far the most popular of the 3800 family for its power, smoothness, fuel efficiency, and reliability, although the stroke for the 3.8 liter engine remained at 3.4 in (86 mm), and the bore remained at 3.8 in (97 mm).

What is the horsepower output for 3800 Supercharged engine?

The supercharged 3800 Series III, found in the Grand Prix GT or GTP (depending on model year), unleashed 260 horsepower. The 3800 and 3800 SC Supercharged engines offered 230 foot-pounds of torque at 4,000 RPM and 380 foot-pounds of torque at 5,200 RPM, respectively.

What is 3800 V6?

Though the pre-3800 rear-wheel drive (RWD) V6 uses the Buick, Oldsmobile , Pontiac (BOP) bellhousing pattern, an oddity of both the front-wheel drive (FWD) and RWD 3800 V6 is that although it is a 90° V6, it uses the GM 60° V6 bell housing (Metric Pattern).

What is a 3800 engine?

GM’s 3800 engine is a 3.8 liter V-6 used in many models, like the Bonneville , LeSabre , and Grand Prix.

Is the MAF sensor the same on a Pontiac?

Whether your driving a Buick, Chevy, Olds, or Pontiac vehicle (with a 3.8L V6) the circuits descriptions of the wires coming out of the Mass Air Flow (MAF) sensor are the same.

Are there any superchargers for the Pontiac Grand Prix?

Do these parts fit your vehicle? Find out now. Only 1 left! Only 1 left! Only 1 left! Only 1 left! Only 1 left! Only 1 left! Only 1 left! Only 1 left! Only 1 left! New Genuine GM Mounting Gasket Part #12584411.

Which is the best source for Pontiac Grand Prix information?

Welcome to Grand Prix Net; your best source for Pontiac Grand Prix information. The administrator of this web site does not endorse, recommend, or guarantee any of the products or services being offered by any sponsors or vendors. Trademarks are the property of their respective owners.

How long does the zzperformance L36 supercharger kit last?

You’ll have room for easy upgrades with the SS kit as well because the Supercharger comes with a modular pulley system. The blowers are used cores with any worn parts replaced, and guaranteed for 1 year. The L36 S/C kit is one of the most popular items ZZPerformance has ever offered.

Navigation