Can a flooded engine fouled plugs?
If an engine is flooded with fuel while it is being cranked, gasoline can soak the plugs and bleed off the ignition voltage before it forms a spark. A single misfiring plug can dump enough raw fuel into the exhaust to overheat and damage the converter.
What causes a carburetor to flood when you start the engine?
The most common cause of flooding is dirt in the needle & seat. What happens often is you clean your carburetor, then start the engine. Dirt from a dirty gas tank, or in the fuel line rushes up and into the carburetor. So if your gas tank has been is use for many years, consider taking it off and giving it a good cleaning.
What happens if your Honda bike gets flooded?
Flooding is a common problem in vintage Hondas – especially on bikes that don’t get run much. Flooding can be just a minor aggravation …like hard starting or poor fuel mileage. But, it can also lead to catastrophic problems such as severe engine damage or even a fire! Flooding issues should not be ignored!
Can a bad carburetor float cause engine problems?
A bad or sticking carburetor float causes engine problems. Watch for certain signs and symptoms if you suspect the carburetor float is sticking. One of the signs that the carburetor float is sticking is when the engine will not idle. The float is not letting enough fuel into the reservoir, allowing for a constant idle of the engine.
What causes the carburetor on a Rochester Monojet to flood?
The Autolite 4300 and Rochester Monojet is especially guilty of this happening because the float fills up the float bowl so much. The most common cause of flooding is dirt in the needle & seat. What happens often is you clean your carburetor, then start the engine.
The most common cause of flooding is dirt in the needle & seat. What happens often is you clean your carburetor, then start the engine. Dirt from a dirty gas tank, or in the fuel line rushes up and into the carburetor. So if your gas tank has been is use for many years, consider taking it off and giving it a good cleaning.
Flooding is a common problem in vintage Hondas – especially on bikes that don’t get run much. Flooding can be just a minor aggravation …like hard starting or poor fuel mileage. But, it can also lead to catastrophic problems such as severe engine damage or even a fire! Flooding issues should not be ignored!
A bad or sticking carburetor float causes engine problems. Watch for certain signs and symptoms if you suspect the carburetor float is sticking. One of the signs that the carburetor float is sticking is when the engine will not idle. The float is not letting enough fuel into the reservoir, allowing for a constant idle of the engine.
What causes carbon fouling on a fuel plug?
4) The cause of carbon fouling lies in the fuel system. It is not a problem with the plug. If the carbon adhering to the plug is cleaned off (by sandblasting), the function of the plug will be recovered and it will be possible to re-use it.