Why is the speedometer not working in my car?
If your speedometer stopped working and stays at 0 MPH, you should have your car checked ASAP. The most common causes of a speedometer that stopped working include are a faulty speed sensor, a broken gear on the speedometer, damaged wiring, or a faulty engine control unit.
What to do if your Honda speedometer won’t work?
Read on to learn how to fix your Honda’s failing speedometer and odometer. This article applies to the Honda Civic (1992-2002) and Accord (1992-2002).
Where is the speedometer on a Honda Accord?
It is in the back of the engine compartment on top of the transmission. Remove the air intake hose and filter. Remove the electrical connector on top of the VSS by squeezing the clip and sliding it off of the sensor. Remove the VSS bolt with a 10 mm socket, ratchet, and extension. To remove the VSS, wiggle and pull it straight out.
How do you remove the speed sensor on a Honda Accord?
Remove the electrical connector on top of the VSS by squeezing the clip and sliding it off of the sensor. Remove the VSS bolt with a 10 mm socket, ratchet, and extension. To remove the VSS, wiggle and pull it straight out. The drive link, which is a small part that links the speed sensor to the transmission, should come out as well.
How can I get my Honda odometer to work?
Use a Phillips screwdriver to remove the screws of the dashboard bezels. There is one near the A/C controls and another above the gauge cluster itself. Undo several clips on both sides of the dashboard bezel, and remove it. Use a 1/4” ratchet, socket and extension to remove the wiring cluster from the dashboard.
Why did my 1997 Honda Accord speedometer stop working?
1997 Honda Accord speedometer stopped working – Answered by a verified Mechanic for Honda We use cookies to give you the best possible experience on our website. By continuing to use this site you consent to the use of cookies on your device as described in our cookie policyunless you have disabled them.
Why does my odometer and speedometer stop working?
Your speedometer and odometer can start acting wonky (or stop working altogether) for two main reasons: either your vehicle’s speed sensor or speedometer gauge cluster have failed. Both problems are simple and inexpensive to fix, even for the novice DIY-er.
Remove the electrical connector on top of the VSS by squeezing the clip and sliding it off of the sensor. Remove the VSS bolt with a 10 mm socket, ratchet, and extension. To remove the VSS, wiggle and pull it straight out. The drive link, which is a small part that links the speed sensor to the transmission, should come out as well.
How do you replace a speedometer on a Honda?
Undo several clips on both sides of the dashboard bezel, and remove it. Use a 1/4” ratchet, socket and extension to remove the wiring cluster from the dashboard. Unplug the harness from the gauge cluster. Plug the stock harness into the replacement gauge cluster/speedometer. Use the 1/4” ratchet, socket and extension to install the new cluster.