Why is the OBD port on my scanner not working?
If you are trying to connect your scanner to the OBD Port it does not work, does not communicate with the car we will show you how to fix that. Usually there is a fuse for the OBD port, if you cannot find they the fuse for the cigarette lighter and the auxiliary ports. Instagram: https://www.instagram.com/worldmechan…
Why does my Honda Civic scanner not link?
It plugs in fine, but when you hit the “LINK” button to retrieve codes, after about 10 seconds, the scanner comes up “ERR” Had a gas cap message that turned into a check engine light. Changed the cap and needed to clear the code. Removed the battery overnight and the code cleared but, the scanner still won’t retrieve codes.
Where can I get an OBD code scanned?
You can have your codes scanned free at most auto parts chain stores. If you’ve plugged into your car’s diagnostic port and aren’t reading anything, you might think that your OBD-II brain has been fried, but don’t declare it dead yet. The most common reason for getting no OBD code is simply a blown fuse.
Why do I get No OBD code on my car?
Blown Fuse If you’ve plugged into your car’s diagnostic port and aren’t reading anything, you might think that your OBD-II brain has been fried, but don’t declare it dead yet. The most common reason for getting no OBD code is simply a blown fuse.
Where is the OBD2 port on a Honda Civic?
OBD2 port Honda Civic 8 (2006 – 2011) – Find your plug ! Where is my OBD2 port ? All vehicles are equipped with an OBD port to which you can connect your klavkarr diagnostic case.
It plugs in fine, but when you hit the “LINK” button to retrieve codes, after about 10 seconds, the scanner comes up “ERR” Had a gas cap message that turned into a check engine light. Changed the cap and needed to clear the code. Removed the battery overnight and the code cleared but, the scanner still won’t retrieve codes.
Why is my OBD II scanner not connecting?
My OBD II scanner won’t link with my 2006 Civic EX. It plugs in fine, but when you hit the “LINK” button to retrieve codes, after about 10 seconds, the scanner comes up “ERR” Had a gas cap message that turned into a check engine light. Changed the cap and needed to clear the code.
You can have your codes scanned free at most auto parts chain stores. If you’ve plugged into your car’s diagnostic port and aren’t reading anything, you might think that your OBD-II brain has been fried, but don’t declare it dead yet. The most common reason for getting no OBD code is simply a blown fuse.
Can a dash cam connect to the OBD port?
So yes, the OBD port’s power pin (battery positive 16): So except for the fact that you will/could drain the battery, connecting a dash cam to the ODB II port should not give any problems.
Can a Mazda MPV not communicate with OBD2?
I once worked on a Mazda MPV with a similar problem. OBD II Scanner refuses to communicate with the vehicle! the BCM will kill the obd2 port. probe off the diagram and I bet BCM controls the ground like it does on fog lights, windows, and gauges.
What to do if your OBD2 is not communicating?
Check your fuses. Look for the one labeled “accessory”, “ACC”, “CIG”, etc. on the label on the fusebox lid. If you aren’t getting power at the port (easy to test with your multimeter), the fuse is likely the issue.
Where is the OBD2 port in my Hyundai Sonata ( NF )?
OBD connector location for Hyundai Sonata (NF) (2004 – 2010) You will find below several pictures which will help you find your OBD connector in your car. The OBD connector is located above the pedals. Go to the OBD2. scanner for HYUNDAI. The OBD II plug is on the left of the clutch pedal. Here is the OBD II port.
What to do if the OBD II scanner doesn’t communicate with the vehicle?
What to do if the OBD II scanner doesn’t communicate with the vehicle. TEST 1: Connect the positive DMM lead to DLC pin 4 and the negative DMM lead to the negative battery terminal, using jumper wires if necessary. Do not connect to the body or chassis ground but to the battery terminal directly.
Where do I plug in my OBD reader?
Where’s my OBD-II port? Just select your vehicle below and we’ll show you exactly where to plug in your Hum OBD Reader. If you don’t see your vehicle listed, please call (800) 711-5800 for help.
Why is my OBD2 not connecting to YouTube?
These issues include an incompatible obd2 scan tool, bad fuses, damage in the circuit board, ECU, and failed computer. OBD-II…. Non connecting data Port Issue. *FIXED* This might help you! – YouTube OBD-II…. Non connecting data Port Issue. *FIXED* This might help you! If playback doesn’t begin shortly, try restarting your device.
What kind of system does Nissan Altima have?
Air Conditioner Control, Compass, Heated Steering Wheel, Homelink Universal Transceiver, Inside Mirror, Power Distribution System, Rear Window Defogger, Engine Control Module, Power Distribution System
Where is the fuse on a Nissan OBD-2?
I am told by an Infiniti tech that the fuse is a 10 amp fuse in slot number 12, on the far left bottom row. The legend for that fuse is “ELEC PARTS”.
How many fuses are in a Nissan Altima?
Passenger Compartment Fuse Box No. A Circuit Protected 1 10 Auto Light System, Back-up Lamp, BCM (Bo 2 10 Heated Steering Wheel 3 15 BCM (Body Control Module), Intelligent K 4 15
Is there a fuse for the OBD port?
Usually there is a fuse for the OBD port, if you cannot find they the fuse for the cigarette lighter and the auxiliary ports. Instagram: https://www.instagram.com/worldmechan… FACEBOOK PAGE: https://www.facebook.com/worldmechani… This is not a sponsored video. Everything is purchased by us! The video is meant for entertainment purposes only.
How can I tell if the OBD system is working correctly?
Turn the key to “on,” and then run so that the engine cranks. Watch the dash during this time. The Check Engine Light should flash on, and stay on for a brief period. It should then turn off. The brief flash on is the signal that the system is up and running, and ready to monitor your vehicle during operation.
Why does my OBD scanner won’t work?
As mentioned the cigarette lighter fuse also powers the OBDII port. Holy shit that makes no sense! At the same time, it makes perfect sense, because my cigar lighter doesn’t work. Faulty engineering by GM in my opinion. Thanks everybody, I’ll try this when I get home & let you know the results.
Blown Fuse If you’ve plugged into your car’s diagnostic port and aren’t reading anything, you might think that your OBD-II brain has been fried, but don’t declare it dead yet. The most common reason for getting no OBD code is simply a blown fuse.
Turn the key to “on,” and then run so that the engine cranks. Watch the dash during this time. The Check Engine Light should flash on, and stay on for a brief period. It should then turn off. The brief flash on is the signal that the system is up and running, and ready to monitor your vehicle during operation.
Why is my OBD scanner not working on my GMC Sunfire?
Check your fuses, I can not remember exactly which one,but I have seen multiple times that the OBD port fuse is blown. I know some smaller GM’s (cavaliers, sunfires) are run off the electric seat fuse. The yuppie speaks the truth. Don’t ask me why GM put the OBD port on that circuit……Pull the cover and swap a fuse in that spot.