Why is the CD changer on my Jaguar XJ8 not working?

Why is the CD changer on my Jaguar XJ8 not working?

Had a “CDC Error” caused by the CD changer in boot of XJ6 2004 not being able to eject or change a CD from the fifth track. Removed unit as described above and manually rotated the big gear which cured the error. CD works fine for now although I haven’t tried the fifth track yet.

When did the first Jaguar XJ8 come out?

The XJ line has had a long history, with the first model released in 1968. The Jaguar XJ8 is based on X308 platform and like all previous XJ generations, it features the Jaguar independent rear suspension arrangement, powered by a new V8 engine.

Can a 2001 Jaguar XJ6 read a CD?

A 2001 cd player wont be able to read a file type that was created after 2001. I cant remember specific types it can or cant read, but just remember to keep to old file formats I just fixed my Jag XJ6 multi changer this way bit of a bugger getting the screws out of the mounting unit on the car.

The XJ line has had a long history, with the first model released in 1968. The Jaguar XJ8 is based on X308 platform and like all previous XJ generations, it features the Jaguar independent rear suspension arrangement, powered by a new V8 engine.

What happens when you change gears on a Jaguar XJ?

I have twice now gotten an incorrect gear ratio error that lets me limp home; when the car is restarted, no problem. It is QUITE a problem when you go to accelerate on the highway and the engine just revs. Flipping to a different gear, or in and our of neutral, does nothing. Not even an error message most of the time.

How can I Reset my Jaguar XJ transmission?

Check the connector on the transmission (driver’s side) if it has the rubber boot, or check for the connector’s connection cleanliness, check pins if they are not corroded, use electronic parts cleaner. Check for trans mount, if it’s gone the trans will move more then it was designed and can cause connection problems. How can I reset my lights?

What causes a Jaguar XJ transmission to neutralize?

Neutralization of the transmission (car running, NO engagement of the transmission until it slowed to 30mph) was due to a bad ABS wire, and misalignment so some sort of the left rear ABS element at the wheel itself (or so I’m told by the mechanic who fixed that issue).

When did the Jaguar xjjguar come out?

2004 Model Year Electrical Guide The Jaguar XJJaguar XJ 2004 DATE OF ISSUE: April 20031 Jaguar XJ 2004 Table of Contents

What kind of car is a 1998 Jaguar XJ8?

On a side note sold a Mercedes S-430 after spending $7000 on “maintenence” on a car with 80k miles the 2000 Jaguar XJ8 has been a much better car so far! I have exactly the same problem on a 2000 year XJ8, and would be interested to hear if you have identified a solution.

How to fix CD changer on 1998 Jaguar XJ8?

Open the unit like a clamshell at the back of the changer. Using a flashlight illuminate the internals. Spray a SMALL amount of lubricant (I used white lithium grease with long skinny straw attachment) onto the exposed gears and levers inside the unit. Temporarily plug unit into the wire harness and test before re-install.

Why does my Jaguar XJ8 say no disk?

1998 Jag XJ8 Cd Changer (6 disk trunk mount) shows “no disk” even though magazine is full. Seems this is a common problem. I have seen references to a fix/repair that exists but can’t find any specifics.

A 2001 cd player wont be able to read a file type that was created after 2001. I cant remember specific types it can or cant read, but just remember to keep to old file formats I just fixed my Jag XJ6 multi changer this way bit of a bugger getting the screws out of the mounting unit on the car.

On a side note sold a Mercedes S-430 after spending $7000 on “maintenence” on a car with 80k miles the 2000 Jaguar XJ8 has been a much better car so far! I have exactly the same problem on a 2000 year XJ8, and would be interested to hear if you have identified a solution.

What happens when you turn off the ignition on a Jaguar?

When activated, it de-energizes the ignition relays in the engine compartment, driver’s side fascia and trunk fuse boxes. It also removes ground inputs from the BPM and windshield wiper stalk switch. This stops the engine and fuel pump, unlocks any locked door, and de-energizes unnecessary electrical systems.

What to do if your Jaguar does not start?

Take your transmission shifter and put it in the “N” position from “P” and try to start the car. The shifter selector switch has been known to wear out or out of adjustment causing a no start situation. If the car does not start put it back in “P” and check the inertia switch.

Can a jagrepair V8 engine be cylinder washed?

It just needs to be finessed like a good woman. The only way to know is to check the date of manufacture of your AJ-V8. If you find that you have a Nikasil engine then you may have a case of cylinder washing. If you fall into this category you will need to get it started and that will take a little time.

Do you need to clear jagrepair repair codes?

DO NOT clear them until they are written down/documented. It is important to get these codes prior to your attempting your vigorous attempt to start the car. Your vigorous attempts can cause factious codes misleading you with bad information. Next is to find out what they mean.

Had a “CDC Error” caused by the CD changer in boot of XJ6 2004 not being able to eject or change a CD from the fifth track. Removed unit as described above and manually rotated the big gear which cured the error. CD works fine for now although I haven’t tried the fifth track yet.

What to do if your CD Changer magazine is not ejecting?

So try cycling through all six discs a few times then try ejecting the cassette again. pull the cables out , leave it a minute and put em mack in. With any luck it will do a full mech restart and be back in business. Other trick is to rattle the mag as you eject.

So try cycling through all six discs a few times then try ejecting the cassette again. pull the cables out , leave it a minute and put em mack in. With any luck it will do a full mech restart and be back in business. Other trick is to rattle the mag as you eject.