Why is my pilot light not working in my camper?
If replacing the thermocouple doesn’t work, your pilot light problems might be because the pilot light’s gas line has too much air in it. This prevents the pilot light from turning on and staying on.
Are there any problems with my Honda Pilot?
Honda Pilot Problems. Find the most common issues based on car owner complaints. To check for problems affecting your car, select your make and model below: Tap theto learn more about the most common Honda Pilot problems. The engine may stall when the engine is warmed up. The AC compressor may seize resulting in loss of cold air from the AC vents.
How do you relight a pilot light on a water heater?
Relight the pilot light. Turn the control valve to “on”. When the gas burner comes on, use a 50/50 dish soap/water mix to test the screw joints for air bubbles that indicate leaks. Note: When relit, the water heater pilot light flame should wrap around the thermocouple bulb.
How to troubleshoot and repair automotive running light problems?
Step by step guide on how to troubleshoot and repair automotive tail and running lights, this information pertains to not working, dim and flickering lighting systems. Begin with the car on level ground, engine off with the parking brake set, wear protective gloves and eye wear.
If replacing the thermocouple doesn’t work, your pilot light problems might be because the pilot light’s gas line has too much air in it. This prevents the pilot light from turning on and staying on.
What to do if your running light does not work?
Turn the vehicle headlights on and use the circuit tester to test the pins on the connector at the back. If there is no power on the running light pin then there is a break or loose connection somewhere between the connector and where it terminates at the front of the vehicle that you will need to track down.
How to troubleshoot no running lights on trailer but turn?
Testing the truck’s connector tells if the problem is on it or the trailer. If everythig checks out here then the issue is on the trailer side. If you have a problem on the truck then you need to trace the wires coming from the connector looking for any damage. You should also check the ground connection making sure it’s clean and solid.
What do you need to know about pilot light?
The pilot light flame needs to completely envelop the top of the thermocouple rod so it knows the flame is on. If the thermocouple isn’t lined up correctly, it won’t read the flame, and will shut the valve for the gas. I’m not touching it. Help me!