Why is my motor mover not working?
The most likely cause and the first thing to check is if the leisure battery is flat. Motor movers require 12v electricity from the caravan’s leisure battery to power the rollers. This could indicate that the motor mover is trying to function however, there isn’t enough power to generate the motor mover to work.
How do I reset my Powrtouch motor mover?
reset isolation switch by turning off and remove the key for at least 15 seconds and then turn on again. the green light on the electronics box should be illuminated. check battery voltage of the handset is correct.an indication of this is given by a slow green flashing light on the hand set.
Where is the reset button on a truma motor mover?
Please ensure that the caravan plug has been plugged into the safety socket. Press the reset button (k) on the control unit and hold down (red LED – j – flashes slowly), and after approx. 5 seconds the LED (j) starts to flash rapidly.
How do you service a Powrtouch motor mover?
Maintenance. The Powrtouch caravan mover requires minimum maintenance, it should be kept clean and tidy and all times, this can be done by washing with water at hose pipe pressure only (please note a pressure washer should never be used).
How do you pair a Powrtouch phone?
Handset tuning instructions FM/CDFM
- Locate the Pin (location shown in picture) and remove from the box, or use wooden stick.
- Switch on electronics with the red isolator key.
- Insert pin into the hole marked ‘R’ (picture shown)
- Press the pin down and release, the red and green lights will flash (alternating)
What is a manual motor mover?
A motor mover is a manual or 12V motorised device which is clamped to a caravan chassis and connects to rollers attached to the caravan wheels which then propel the caravan in any chosen direction, controlled by a handset.