Why is my Mercedes Benz SLK350 not starting?

Why is my Mercedes Benz SLK350 not starting?

If nothing happens when you turn the ignition key to the “Start” position, it means that the starter motor doesn’t turn over the engine. Most commonly this could be caused by a low/dead battery or there is no connection between the battery and starter. Check the battery and the terminal cable connections.

Why does my car not start when I turn the key?

If you turn the key to the “Start” position, but the engine won’t crank; all you hear is a single click or repeated clicking coming from the engine compartment. Very often this could be caused by a low battery or poor connection between the battery and starter. Check the battery and the terminal cable connections.

Why does my Mercedes not start when I charge the battery?

This Mercedes-Benz is not starting because of a low battery. In this case, what you need to do is trickle charge your battery using any of these 12 volt battery trickle chargers. If you need help read this article on How to charge a Mercedes-Benz the right way. Mercedes won’t start, and it’s not the battery.

What should I do if my Mercedes Benz won’t start?

Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.

Is there a problem with my SLK 230 R170?

Hi I have recently had a ‘No Start No Crank’ problem with my SLK 230 R170. This happens when the key is turned on and all the dashboard lights show but the engine will not turn over. I did some research on this problem and it appears that this is a common fault with this model and there is a simple fix which can be found on You Tube

Why is my SLK 230 no start no crank problem?

To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information. Please try again later. Hope this is of interest. Did you clean all 5 connecters before you plugged them in?

Start the car and you should be able to get around 60 psi. When the engine is running and when you turn off the engine the pressure should stay steady. Always perform this test on a cold engine. Next, make sure that the fuel injector connections are secure and not loose. Check the fuel pump and the fuel pump relay.

This Mercedes-Benz is not starting because of a low battery. In this case, what you need to do is trickle charge your battery using any of these 12 volt battery trickle chargers. If you need help read this article on How to charge a Mercedes-Benz the right way. Mercedes won’t start, and it’s not the battery.

Hi I have recently had a ‘No Start No Crank’ problem with my SLK 230 R170. This happens when the key is turned on and all the dashboard lights show but the engine will not turn over. I did some research on this problem and it appears that this is a common fault with this model and there is a simple fix which can be found on You Tube

When was the last time my SLK wouldn’t start?

The only time my 2001 SLK wouldn’t start is when the original battery failed at 4 1/2 years with 35,000 miles. No warning…just wouldn’t start when I came out of the Mall one night. Luckily there was a Sears at the mall to get a new battery.

Why is the clutch pedal not working on my SLK?

The ignition switch sends power signal to the clutch pedal switch & then to relay module & then to the starter. Either the clutch switch or the relay module is the most likely problem.

Why does my SLK 230 not start up?

The k40 board was re-sodered and looks good. The only code on the OBD-II is the camshaft Position Sensor but I ‘ve had that issue for over 7,000+ miles. When I sit in the drivers seat and I turn the key a few positions I do not hear the fuel pump “humm” in the passenger rear side of the car. So I got under the car and examined the fuel pump.

Why does my Mercedes slk200 Kompressor not start?

There are a number of issues that can go wrong with starting system and make your 2000 Mercedes-Benz SLK200 Kompressor car won’t start or hard time to start – This article guides you through some of the facts behind the starting system, and the components that may be to blame, and tells you what action you can take to try to remedy each situation.

How old is my Mercedes SLK 230 R170?

Car seems to run better, smoother and quieter. Click to expand… Quite a lot of my electrical problems over the past 5 years or so have been solved by simply cleaning the connectors, including an ABS module fault. My car is over 22 years old now.

What should I know before jumping the starter solenoid?

This is the most important thing to check before thinking about jumping the starter solenoid. You need to make sure that your car battery can supply enough current to start the solenoid and turn your engine. Even if your vehicle has a bad starter solenoid, you need a good and strong battery to start the engine.

Why is my Mercedes Benz starter not working?

Often times, when the starter is defective or seizes up it will blow out the fuse that protect the starter circuit. Another thing that you can try is to hit the starter with a rubber hammer a couple of times. Depending what kind of starter problems you have, the starter may work a few more times.

If nothing happens when you turn the ignition key to the “Start” position, it means that the starter motor doesn’t turn over the engine. Most commonly this could be caused by a low/dead battery or there is no connection between the battery and starter. Check the battery and the terminal cable connections.

Often times, when the starter is defective or seizes up it will blow out the fuse that protect the starter circuit. Another thing that you can try is to hit the starter with a rubber hammer a couple of times. Depending what kind of starter problems you have, the starter may work a few more times.

How to reset check engine light on Mercedes slk230?

I found on the wiki a method how to reset check engine light on your MErcedes SLK230, switch the key in ignition on position 2, turn steering wheel full left then full right and back to centre and warning lights will be reset. This works only after you changing the battery.

How to fix no power no start on most Mercedes-Benz?

HOW TO FIX NO POWER NO START ON MOST MERCEDES-BENZ VECHICLES DIY. – YouTube HOW TO FIX NO POWER NO START ON MOST MERCEDES-BENZ VECHICLES DIY. If playback doesn’t begin shortly, try restarting your device.

I found on the wiki a method how to reset check engine light on your MErcedes SLK230, switch the key in ignition on position 2, turn steering wheel full left then full right and back to centre and warning lights will be reset. This works only after you changing the battery.

Why is the battery on my Mercedes Benz not working?

Hint: Starter Problem or Low Battery This may seem obvious, but an old battery is the root of many headaches and can cause all sorts of malfunctions on Mercedes-Benz cars. How old is the battery on your Mercedes-Benz?

How to reset service light indicator Mercedes SL 500?

Within 10 seconds, turn key in steering wheel lock to position 0. Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds). Release button.

Why does my VW Amarok engine not start?

If the wrong amount of fuel is being injected into the combustion chamber, or being injected at the wrong time, the engine will not start. Again, this will be a case where the engine cranks over, but will not actually run. This could be caused by a few different parts including the fuel pump, fuel filter, fuel injectors, and fuel lines.

Why does the fuel pump on my SLK 230 not start?

Considering you have electricity in the wires to the pump, and and doesn’t start pumping, there is noe relay or switch problems. These would probably popped up on the OBD-II. So yes, I think it’s the fuel pump. Unless anyone knows any way of testing the pump other than what you’ve already done. 1.