Why is my Mercedes Benz instrument cluster not working?

A common cause of electrical gremlins is low voltage. Check the battery before starting – it should be around 12.5v. During start it shouldn’t drop below 11v, and after start, it should be around 14v.

Why are the lights on my dash not working?

Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.

How to rebuild a Ford Focus dashboard cluster?

To pay for the rebuild click the link above, select your cluster and click: Get yours rebuilt Print the payment/booking confirmation email. Package the Ford Focus dashboard instrument cluster inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

What happens if the instrument cluster fails while driving?

If the instrument cluster fails while driving, then this will often cause the engine to cut out. If failure happens while attempting to start the vehicle then it will prevent the engine from starting.

What to do if your instrument cluster is not working?

Side note: NO work has been done on the XJ since the XJ last ran without issue, and that was a week ago. Maybe try and disconnect the battery to clear the pcm?

Why is my instrument cluster not working on my Jeep XJ?

Went to start the XJ last night to load it onto the trailer to move it to my buddy’s shop and it would start, run for 3-4 seconds and then shut off. The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698.

Why does my Audi A3 not start up?

The cluster has the immo in it and since the cluster is dead it wont let you start it. Its usually the processor of the cluster which goes bad which is replaceable. Just find a shop specialised in fixing instrument clusters/VAG clusters and send it in to get checked/repaired.

What does it mean when your truck won’t start?

After driving for a while, the gauges start going erratic and eventually drop to thier resting points and stay there. Tech2 won’t communicate with ECM, TCM, EBCM, TCCM, IPC. The truck stays running until you shut it off, then it won’t start.

When did the Mercedes CLK 500 come out?

1st owner purchased on 07/14/05 and owned in GA until 12/23/08 • 2nd owner purchased on 12/23/08 and owned in GA until 05/13/20. 1st owner drove an estimated 9,192 miles/year • 2nd owner drove an estimated 9,190 miles/year.

Are there any indicators on a Mercedes Benz?

Basically nothing works – no warning lights, no digital display, no speedo. The only things that do work are the high beam indicator lights and the indicators. The car starts and drives ok though.

How to reset steering angle sensor in Mercedes medic?

As the windows and the sunroof reach fully open / fully closed positions, continue to hold the switch down or up for 5 seconds. The steering angle sensor must be reset by turning the steering wheel to full left and full right with the engine running. Clear the BAS/ETS/ESP and other instrument cluster warnings.

Why does my Mercedes Benz C300 not start?

I’m having the same issue with my Mercedes Benz C300 2008-the first time I was stuck on the 12th floor and no tow truck would fit in the parking garage-we ended up rolling it down the 12 floors. The battery was so dead that the wheel wouldn’t turn, the ligts went on and the dash lit up but the car just wouldn’t start.

Why does my instrument cluster not wake up?

The cluster wakes up based on CAN bus signals. It sounds like some signal is not getting across the CAN to activate the cluster with the engine running. I think this might be coming from the ECU, but I’m not sure.

How many times has my Mercedes C class not started?

It will cost you around 1200 to replace because of the computer system. 66 people found this helpful. My 2010 C300 has been towed 5 times in 3 years as it won’t start. Today, first warm and humid day – call the tow truck. The dealer has no idea !!

Are there any problems with the W211 instrument cluster?

The instrument cluster on the W211 E-Class, 2003-2009 are known to fail and can exhibit problems such as the cluster lights going out or burned LEDs. Unfortunately, while the cluster can be repaired by an experienced professional most mechanics will not be able to fix the cluster for the E-Class.

What happens when an instrument cluster is replaced?

When a new cluster is installed it will need to SCN coding which the dealer will have to perform or any repair facility that is equipped with Mercedes-Benz MB SD Connect Compact Star Diagnostic Tool. If the cluster is replaced with a used cluster from another Mercedes-Benz, then the miles will not longer show on instrument cluster.

Why is the gas gauge not working on my Mercedes?

ONE THING I HAVE NOTICED is that when i turn the key all the way to the power position (the last point before turning car on) the instrument panel lights up fine , the gas gauge works annd shows me how much gas there is and i can navigate through, however when i tuen the car on it Iinstrument cluster ) DIES OUT…

When was the Mercedes Benz CLS 55 AMG introduced?

It was the first new-age, four-door coupe on the market. This kind of bodywork was long-forgotten and only a big brand such as Mercedes-Benz could revive it and receive applause. In the autumn of same year, the carmaker introduced the CLS 55 AMG at the Paris Motor Show.

Where are the Mercedes-Benz CLS fuse panels located?

There are three main fuse panels and several pre-fuse boxes. Where are the Mercedes-Benz CLS fuse box location? Main fuse and relay box in the engine bay. Left / driver side of engine. Interior fuse box. Located on the left side of dash. Main fuse and relay box in trunk. Front prefuse box. Passenger side front fender. N118 Unit 3 and 4.

Why is my Mercedes Benz starter not working?

Often times, when the starter is defective or seizes up it will blow out the fuse that protect the starter circuit. Another thing that you can try is to hit the starter with a rubber hammer a couple of times. Depending what kind of starter problems you have, the starter may work a few more times.

Why is the brake light switch on my Mercedes not working?

If you don’t see the letters on the cluster change from P to R to N, it is a good sign that the gear selector module is defective. You can buy a new brake light switch on Amazon for less than $15 USD, just do a search for Mercedes-Benz Brake Light Switches.

Why are the parking sensors on my Mercedes not working?

Also, the front and rear parking sensors are not working. Hi, did you ever get this resolved? What was the cause? My E200 kompressor did exactly the same thing yesterday, and now has a totally dead instrument panel.

Basically nothing works – no warning lights, no digital display, no speedo. The only things that do work are the high beam indicator lights and the indicators. The car starts and drives ok though.

When to use remanufactured part car instrument cluster?

This means that drivers can be alerted when the road is icy or their car needs to go for an inspection. Be kind to your wallet and the environment with the remanufactured part car instrument cluster. The remanufactured instrument clusters from Mercedes-Benz are your key to minimizing direct costs.

Why is the EIS not working on my Mercedes?

It could also be the EIS (electronic ignition switch), but then I’d suspect other things wouldn’t be working properly. A common cause of electrical gremlins is low voltage. Check the battery before starting – it should be around 12.5v. During start it shouldn’t drop below 11v, and after start, it should be around 14v.

Why is the LCD on my Mercedes E class not working?

Several Mercedes models, including C Class and E Class from 1995 to 2003 have fading or completely dead pixels on the instrument cluster LCD display. This display normally shows the mileage, the temperature or the clock. The pixel problem lies with the ribbon cable that connects the LCD display to the circuit board of the instrument cluster.

Where is the temperature sensor on a Mercedes Benz?

You can now get access to the temperature sensor behind the idler pulley. Squeeze the electrical connector and remove it from the sensor. Use a flathead screw driver and slide the clip that holds the sensor in place up towards the air pump, you will not be able to pull the clip all the way straight up and out with out removing the air pump.

Where can I get code for Mercedes instrument cluster?

Nothing is more frustrating than realizing your radio is dead and you don’t have the code. It is available from your local Mercedes-Benz dealer, upon showing them proof of ownership such as your vehicle registration. The instrument cluster on the Mercedes W210 chassis simply pushes into the dashboard.

What to do if your instrument cluster light bulb is not working?

The first step is to disconnect the battery. With the battery connected, it is possible that disconnecting the cluster can trigger the airbag light as the computer thinks something is wrong with the system. Unfortunately, you’d need to visit the dealer to have this light reset.

Where are the electrical connectors on an instrument cluster?

On the backside of the cluster are two electrical harness connectors. Press the tab (green arrow) and rotate the locking tab (purple arrow) down. This will unlatch the electrical connectors from the instrument cluster. Shown here is the backside of the cluster.

Where can I repair my Mercedes C class speedometer?

All Mercedes C Class instrument cluster repairs are completed to our high standards and tested in our Atlanta area workshop. Our team fixes Mercedes C Class instrument clusters and speedometers exhibiting a variety of problems, including: My Auto Solutions provides customers with a cost effective way to fix Mercedes S Class instrument clusters.

Where can I repair my Mercedes C class?

The skilled technicians at My Auto Solutions are familiar with the unique instrument cluster repairs that Mercedes C Class vehicles need. All Mercedes C Class instrument cluster repairs are completed to our high standards and tested in our Atlanta area workshop.

How does an instrument cluster in a car work?

How does the instrument cluster work? The instrument cluster generally consists of a speedometer, rev counter, coolant temperature display and various indicator lamps. One of these indicator lamps, for example, is the turn signal indicator.

What causes an instrument cluster to go out?

Jump started car that had died now the cluster is having issues. Improper jumping starting of any Mercedes-Benz car can cause damage to other electronics such as the instrument cluster. Instrument cluster lights for the SPEEDO, CLOCK, RPM are all out? The lights inside the cluster are LED and very unlikely to burn out.

What does B7 on sevice indicator mean?

Today the check engine light came on. Is it just the … read more associates in automotive te… B7 code on a 2013 c300. Can this be reset? Next service B7 B7 code on a 2013 c300. Can this be reset? JA: Just to clarify, what’s the exact code?

How to reset service intervals on Mercedes Benz?

Instructions on how to do that on several different models are shown below. The second method is to use a OBD II scanner such as the iCarsoft MB II which allows you to reset the service intervals on most Mercedes-Benz models. The Service A maintenance appointment will include the following tasks:

How to reset service light indicator Mercedes E320?

To call up the trip odometer and main odometer, press either of lower two buttons on left hand side of steering wheel (system select looks like file folder) until the display appears. Press either of the top buttons on steering wheel (arrows) until the FSS indicator appears. Press R button on the instrument cluster for 2, 4 seconds.

Why are remanufactured instrument clusters important to Mercedes Benz?

The remanufactured instrument clusters from Mercedes-Benz are your key to minimizing direct costs. Because the remanufacturing process helps to save raw materials, the products offer a high level of economic efficiency and are environmentally friendly.

What should the battery voltage be on a Mercedes Benz?

Check the battery before starting – it should be around 12.5v. During start it shouldn’t drop below 11v, and after start, it should be around 14v.

How to replace a light bulb in a Mercedes Benz?

Light bulb replacement guide for Mercedes-Benz cars. Look up your Model on the first column then move over to the right and click on the year or chassis type. If there is something we don’t have on this page check out Philips website here.

What kind of LCD screen does Mercedes C class use?

Mercedes C-Class W203 Amber LCD Screen – New 2001, 2002, 2003, 2004 C160, C180, C200, C220, C230, C240, C280, C320, C350 C180, C200, C230 Kompressor C32, C55 AMG G-Class – W210 (2002-2007) : G320, G430, G500, G55 AMG KOMPRESSOR Replacement LCD screen for Mercedes W203 models, Advise to watch U Tube videos before installation .

Where are the fuses on a Mercedes C class?

Cigar lighter (power outlet) fuses in the Mercedes-Benz C-Class are the fuse #9 (Glove compartment power outlet) in the Engine Compartment fuse box, and fuses #71 (Front cigarette lighter, Front interior power outlet), #72 (Cargo area connector box 115 V power outlet), #76 (interior power outlet) in the Luggage compartment fuse box.

Where is the fuse allocation chart on a Mercedes Benz?

The fuse allocation chart is located in the vehicle tool kit in the storage compartment under the trunk floor. If a newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center.

What to do if a Mercedes Benz fuse blows?

If a newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Before changing a fuse: secure the vehicle against rolling away, remove the SmartKey from the ignition lock, and switch off all electrical consumers.

What was the problem with my Mercedes C300?

TL* THE CONTACT OWNS A 2009 MERCEDES-BENZ C300. WHILE DRIVING VARIOUS SPEEDS, THE AIR BAG WARNING INDICATOR ILLUMINATED. IN ADDITION, BOTH TURN SIGNAL INDICATORS AND WINDSHIELD WIPERS FAILED TO FUNCTION WHEN THE AIR BAG INDICATOR ILLUMINATED. THE VEHICLE WAS NOT TAKEN TO A DEALER OR AN INDEPENDENT MECHANIC FOR DIAGNOSTIC TESTING.

Is there a recall on the 2009 Mercedes C300?

2009 MERCEDES-BENZ C300. CONSUMER WRITES IN REGARDS TO TAKATA AIRBAG SAFETY RECALL. THE CONSUMER STATED THE ELECTRONIC SWITCH THAT IS LOCATED IN FRONT OF THE AIRBAG FREQUENTLY LOCKED THE STEERING WHEEL AND THE CAR WON’T START, WHILE THE VEHICLE IS IN MOTION. IGNITION SWITCH FAILED AT 92,000 MILES.

How to work everything on the instrument cluster?

Press and hold the [ICON] button on the steering wheel until the Trip menu is shown. You can view the following using the arrow keys on the wheel: To reset any of the above, bring it to the front and press ‘OK’. Then, select ‘Yes’ with OK button on the wheel to reset. Will show you the direction you are heading.

How to change phone number on instrument cluster?

To change, use the arrow keys on the wheel. If your phone has been paired, you will see either Telephone ready or Telephone no service. If a call is incoming, you can either accept or reject using the call keys on the wheel. The name of caller will also appear on the multifunction display. Loading…

Are there any problems with the Mercedes CL500?

Keep track that the ABC fluid is good is another important issue with any ABC equipped Benz. These cars are heavy. Your going to burn through front pads and tires every 20,000. But my CL is a pleasure and has been very dependable car overall. My 2000 CL500 just hit 88]

How does the fuel pump work on a CL500?

The pump sends air into the manifold to dilute the rich air/fuel mixture when the motor is cold.

Is there a recall on the CL500 air pump?

You can thank the EPA for that one… it dosen’t actually purify anything, rather just tricks the computer to “think” it is burning cleaner… anyhow, there is a recall for the relays that operate the air pump, and they stick open causing the pump to stay running and burn out. The $40 relay burns up a $400 pump.

What are the problems with a Mercedes Benz?

Top 5 Mercedes-Benz no start problems 1 Engine Click, No Start 2 Engine Dies Right After It Starts 3 Car turns over, but it won’t start 4 The car makes a clicking noise but won’t start. Hint: Starter Problem or Low Battery 5 Key will not turn the ignition More

When did the Mercedes Benz ML Class come out?

In this article, we consider the first-generation Mercedes-Benz M-Class / ML-Class (W163), produced from 1997 to 2005.

Why is the Multi Function Display on my Mercedes C class dim?

A Common fault with the Mercedes C Class instrument cluster is a dimming of the orange LCD multi-function display. This fading often gets worse when the car is hot or has been out in the sun all day.

Where is the instrument on a Mercedes W203?

Once the flex is released, turn over the instrument pod and remove the instrument chassis from the lens unit. Grasp each side of the ‘D’ shaped frame that surrounds the display and un-clip it, each side in turn from the front face of the cluster. This will reveal the thin glass LCD display.

How do you dim a Mercedes C Class W203?

Once this is done, hook into the top of the slot a small hexagon key and pull the cluster gently out from the dash, each side at a time. Set the steering wheel position adjustment – fully out and down to give you maximum working room. Draw the pod forward enough to disconnect the multi-pole connector from the rear.

What are the warning lights on a Mercedes Benz?

The following are warning lights and indicators found in vehicles built by Mercedes Benz. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray), but there are over 40 of them so be patient!

How to remove an instrument cluster from a speedometer?

Pull the cluster out until you can see the electrical harness connecting the instrument cluster. Unplug the connector and completely remove the instrument cluster. Reinstall in reverse order. You are done. Congratulations! The gears on the original speedometer pointer wheel will not turn.

What to do if your speedometer does not turn?

The gears on the original speedometer pointer wheel will not turn. If the gear on the original speedometer pointer does not turn you can replace the gear inside the speedometer instead of replacing the instrument cluster. You may be able to find a replacement gear online, click here to check Amazon.

Navigation