Why is my fan not working on setting 4?
Well your blower motor is fed via a Fuse (fuse 23 (which is 40amp) then two relays (relay 1 and relay 2). And a heater blower speed resistor Can’t understand why they would replace the blower motor if as you say it works on setting 4. You might be best to get a Auto electrician (not a mechanic) to check the circuit out.
How to lower the settings of a dashboard fan?
Firstly remove the glove box by taking out 5 screws (2 underneath and 3 on top) BLUE circles… remove the glove box and look for the wires connected to the heater control module RED arrow remove 2xTorx head screws holding the module in place Remove the connector block.
Why does my Vauxhall fan blower not work?
The fan resistor was replaced by Vauxhall; stil not working. Fan motor was then replaced by a second mechanic – still not working. A third auto elctrician then said the relay was not working – so was replaced. The end result – it’s still not working. Now the auto electrician says it might be the fuse box?
How to change the fan settings in Windows 10?
Method 1. 1 Click the Windows Start button. 2 Click the Gear/Settings icon. 3 Click Update & Security. 4 Click Recovery in the panel to the left. 5 Click Restart now below “Advanced startup.” 6 Click Troubleshoot. 7 Click Advanced options. 8 Click UEFI Firmware Settings. 9 Click Restart.
Why does my fan not work in high setting?
High (4), usually a seperate circuit that by passes the resistor and has a relay for higher current flow required in the high setting The most common cause of two or more speeds not working is the resistor, because if resistor two burns out it will affect speeds 1 and 2 but not 3 and 4.
Why is my Ceiling Fan running so slow?
Ceiling fan running slow or not working on all speeds One annoying issue that might seem like it’s not problematic is a sign that your motor is having electrical issues. A motor that is going bad doesn’t start to run slow or decide to skip certain speeds on the speed control. Electrical motors that are going bad simply stop working.
Why does my blower fan keep shorting out?
To do this, there are resistors built into the unit to control the voltage. If you are not familiar with how electricity works, basically it comes down to this…resistance causes heat. This heat, over the years, can end up burning up and shorting out the blower resistor and associated wiring.
Why is my Minka Aire fan not working?
1. Minka Aire ceiling fan wall control not working 2. Minka Aire ceiling fan remote control not working 3. Ceiling fan and light stopped working 4. Ceiling fan stopped working, but light still works 5. Minka Aire ceiling fan doesn’t work on all speeds 6. Minka Aire ceiling fan won’t reverse 7.