Why is my 6 disc CD changer not working?

Why is my 6 disc CD changer not working?

However, this past weekend we changed her battery for a new one. Since then, my stock 6 disc cd changer no longer works. It makes a clicking noise as though it is trying to retrieve a disc, but it keeps saying “MECHANICAL ERR”. Then a few seconds later it says “EJECT DISC”.

What to do if your CD player won’t load?

These units use a rubber roller to load and eject the CD’s. Over time, the roller can become dirty and lose its gripping power. If this is the only issue, it can be cleaned, and I would recommend denatured alcohol. In my case, the roller was dirty, but this was not the only problem.

What happens if you put 6 CDs in the CD player?

None of them will play and none of them will eject either. Pressing any of the buttons on the CD player produces a flashing CD ERR message on the center console LCD display. Is there a DIY guide explaining how to remove the 6 CD changer?

Why is my CD player not working in my Honda Pilot?

All CDs play but the two in rhe changer won’t eject, the CD in the main slot plays and ejects. I’m hoping the changer will work after I get the two CDs out. The 6 disc CD player in my 2005 Pilot won’t play, and it starts rotating and trying to spit out CDs (even though there no CDs in there) every time I start my engine and turn off my engine.

However, this past weekend we changed her battery for a new one. Since then, my stock 6 disc cd changer no longer works. It makes a clicking noise as though it is trying to retrieve a disc, but it keeps saying “MECHANICAL ERR”. Then a few seconds later it says “EJECT DISC”.

Why does my CD player not read the disc?

A relatively quick fix to an age-old problem: your CD player sits and spins the disc making weird electronicky noises for ages, until either working (until you skip), or until your nerves give up. Loading…

How to fix CD not working in Windows 10?

How to Fix CD Desktop Not Working Windows 10 1 You can right-click the blank space of the computer desktop screen and select New to create a new file on the Desktop. 2 Next you can right-click the create file and choose Properties. 3 Under the General tab, you can check the file path and it contains the current Desktop directory location.

Why is my cd command not working in CMD?

Here the command is not “cd..” but “cd ..”. You missed the space after “cd”. When using command lines in Windows, you should always be aware of the spaces in the command lines and don’t omit them. Can’t navigate to D drive with CD command in Windows Command Prompt (CMD)? Check how to change directory to D drive in Command Prompt.

Why is my CD changer not working properly?

If you can get a partner in the boot (you should join the Mafia LOL), no realy, is the CD changer changing disks correctly and you are getting no audio, or is the CD changer not changing disks. This is why you are seeing two different approaches to the problem.

What to do if your Mercedes Benz Radio is not working?

For you to do that, you will need to remove the fuses for the CD Changer, COMAND/ NAV / DVD Player / Radio, Audio Gateway AGW, and the Voice Unit if it is equipped with one, for at least 10 minutes. Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order.

What to do when your CD player won’t play?

Unplug the power cord of the CD player from the AC outlet for 30 seconds. Plug the power cord back into the AC outlet. Turn on the CD player and attempt to play the disc. If the issue is still not resolved, remove the disc and unplug the power cord from the AC outlet.

Why does my Bose CD player not work?

If it still doesn’t work, you can opt to clean the lens eye itself, by using isopropyl alcohol, and a lint-free cloth to gently wipe the “eye”. Then use a dry spot on the cloth to buff the eye clean. If the CD player is still not reading discs, then the lens or transport mechanism is faulty and would need to be replaced.

What to do if your CD drive is not recognized?

If you find your CD drive is not detected in Windows Explorer, please don’t panic. You should firstly open Disk Management to check. Find This PC icon on your desktop. Choose Manage from the context menu. Move to the Storage section under Computer Management (Local). Select Disk Management. Look for your CD drive in the right-hand panel.

What to do if your CD changer won’t eject?

My CD Changer is jammed and will not eject. A. Before thinking of repair, disconnect the CD changer. Wait several minutes then reconnect. This may act as a “Reset” and bring the CD changer back to life. In some cases, disconnecting one of the battery terminals for several minutes may be easier.

What did I do with my CD changer?

Slid a piece of plastic down the front and that released the changer. Saw a tray and 2 CD’s jammed in the mechanism. Got them out, but one CD was broken with pieces left behind. Pulled the changer out and took off the case, but could only get about half the pieces out.

Why is my CD changer not working on my Corvette?

Just purchased a ’97 and the changer wouldn’t work. Also, I couldn’t get the magazine out. Slid a piece of plastic down the front and that released the changer. Saw a tray and 2 CD’s jammed in the mechanism. Got them out, but one CD was broken with pieces left behind.

What to do if your CD Changer magazine is not ejecting?

So try cycling through all six discs a few times then try ejecting the cassette again. pull the cables out , leave it a minute and put em mack in. With any luck it will do a full mech restart and be back in business. Other trick is to rattle the mag as you eject.

Why does my CD player say no CD?

Rating is available when the video has been rented. This feature is not available right now. Please try again later. Two wrong error messages appear on radio screen when a CD does not fully load into the player. The reason is lack of lubricant on the slider mechanism. A little white grease as shown is a simple and cheap repair. Loading…

My CD Changer is jammed and will not eject. A. Before thinking of repair, disconnect the CD changer. Wait several minutes then reconnect. This may act as a “Reset” and bring the CD changer back to life. In some cases, disconnecting one of the battery terminals for several minutes may be easier.

Why does my radio say no CD changer?

“No CD Changer” messages even though the CD magazine is loaded with 6 CDs. I had the same problem. The radio wasn’t recognizing the signal from the CD changer. There’s a technical service bulletin out from MB. The solution suggests checking the 2 spring tension settings on the sides of the changer. The springs should be set on H for horizontal.

How can I Fix my Mercedes CD player?

But below you will see a so called “remedy”, I found this on a site that does repairs on factory radios/cd players (I am in NY at the moment and they are in FL almost 5 hrs from Miami)…does this method work? I don’t have the stereo code…how can I find it?

“No CD Changer” messages even though the CD magazine is loaded with 6 CDs. I had the same problem. The radio wasn’t recognizing the signal from the CD changer. There’s a technical service bulletin out from MB. The solution suggests checking the 2 spring tension settings on the sides of the changer. The springs should be set on H for horizontal.

But below you will see a so called “remedy”, I found this on a site that does repairs on factory radios/cd players (I am in NY at the moment and they are in FL almost 5 hrs from Miami)…does this method work? I don’t have the stereo code…how can I find it?

Is the 6 CD changer separate from the radio?

My 2000 wiring diagram doesn’t show a separate changer so I can’t tell if the 6 CD changer gets it’s power from the radio, or has a separate supply from the fuse box. The 6 CD changer would have to be removed and the cable between it and the main radio checked, and to ensure the connectors are in properly and none of the wires are broken.

Where is the CD changer on a Subaru Outback?

Check the fuse panel in the instrument panel to the left of the steering column. The Owners Manual has a page identifying the fuses, and should indicate which one is for the audio. The radio itself works fine and the single disc cd player works fine. It’s just the 6 disc cd changer that is located below the radio console that is broken.

My 2000 wiring diagram doesn’t show a separate changer so I can’t tell if the 6 CD changer gets it’s power from the radio, or has a separate supply from the fuse box. The 6 CD changer would have to be removed and the cable between it and the main radio checked, and to ensure the connectors are in properly and none of the wires are broken.

Check the fuse panel in the instrument panel to the left of the steering column. The Owners Manual has a page identifying the fuses, and should indicate which one is for the audio. The radio itself works fine and the single disc cd player works fine. It’s just the 6 disc cd changer that is located below the radio console that is broken.

How does compact disc player work on Subaru Outback?

A bit different from the OP in which case the changer doesn’t even load a disc. In any event, when a compact disc is loaded, the laser LED (which “reads” the data on the disc) is turned on briefly to detect if the disc is in place. The laser light reflected from the silver surface of the disc is the “detection” signal.

Why does my CD player keep ejecting discs?

The other common problem, actually perhaps more so, is that the disc platter motor (the motor that spins the little round surface the disc sits on in the center) may be failing or gone. Again, if the disc is not readable, and a disc that isn’t spinning is not, it will be ejected.

What should I do if my CD player won’t play?

If you can handle only playing regular CDs and the player will load them but won’t load HD- or DVD-Audio then you can do that and use the time to save up for the bokubucks repair. Also, I have to give you a reality-check here. Autosound heads/decks are fashion items, sadly. They change yearly or so, even if there’s no need.

Can a Nissan dealership replace a stock radio?

if you have Extended warrenty on your car, usually it does cover the Radio aswell.. and can be replaced or repared by a Nissan dealership. Just check what your extended warrenty Contract covers. if it says something about electronics and Stock radio, you are sorted.. (they will need to take it appart for you to get your cd’s out though)

Why is my CD player not working on my Nissan?

One common problem with the Nissan CD player can occur when your disc gets stuck in the player, and you may need to troubleshoot the system. You can do this by forcing the disc out to get the player working again right away. Step 1 Enter your Nissan and insert your key in the ignition.

How do you eject a CD from a Nissan?

Turn the key to the “Acc” position to activate your CD player. Press and hold the Eject button for up to two or three minutes to attempt to force the disc out. You can also do this while powering the disc on and off with the “Power” button.

Why is my 6 disc CD player not working?

Those codes are common on Hondas but nissans do not have them. Unfortunately the factory 6 disc CD players are known for going out. Hope you find a fix. Known for going out? Where are you finding that information?

Where is the reset button on a Nissan CD?

Press the “Reset” button on the face of the player to attempt to force the disc out as the system resets. This button is a small black indentation on the lower right of the face and must be pushed with a pen or a paperclip.

What kind of CD player does a Nissan have?

by Matthew Fortuna. Most Nissan automobiles are equipped with CD players, which are connected to the system radio on each car.

How do you get a CD out of a Nissan?

Step 1 Enter your Nissan and insert your key in the ignition. Press and hold the Eject button for up to two or three minutes to attempt to force the disc out. Press the “Reset” button on the face of the player to attempt to force the disc out as the system resets.

What to do when your CD player won’t turn on?

Press and hold the Eject button for up to two or three minutes to attempt to force the disc out. You can also do this while powering the disc on and off with the “Power” button. Step 3. Press the “Reset” button on the face of the player to attempt to force the disc out as the system resets.

by Matthew Fortuna. Most Nissan automobiles are equipped with CD players, which are connected to the system radio on each car.

Step 1 Enter your Nissan and insert your key in the ignition. Press and hold the Eject button for up to two or three minutes to attempt to force the disc out. Press the “Reset” button on the face of the player to attempt to force the disc out as the system resets.

How does a CD player in a car work?

The unit I show was manufactured by Sanyo Automedia, but the mechanism this unit uses for loading and ejecting CD’s is fairly universal, and will apply to most other vehicles / stereo manufacturers. These units use a rubber roller to load and eject the CD’s. Over time, the roller can become dirty and lose its gripping power.

Why is the cd command not working in Windows 10?

If you want to change the directory and folder path at the same time, you can use add the “/d” switch after CD command, e.g. cd /d d:\PS. Issue 2: I used the CD command to switch my drive to E:, but the problem is that the CD command was not working.

What to do if CD desktop is not working?

Some people also encounter that cd desktop is not working, also check how to fix it. To recover data from storage devices, manage hard drive partition, backup and restore system, etc. MiniTool software is professional.

Why does my CD player not accept discs?

If the CD player will not accept the disc or if the disc keeps being ejected, there may be a problem with the disc that you are trying to play or the unit may need to be reset. Follow these steps to try to resolve this issue.

How to reset the CD changer to resolve disc playback problems?

Reset CD Player 1 Turn off the CD player. 2 Press the ALL CLEAR or CLEAR button, then press and hold down the POWER button on the CD player at the same time. 3 Play a CD to confirm the issue is resolved. 4 If the issue is still unresolved after performing these troubleshooting steps, service will be required. See More….

Why are 6 CDs stuck in the CD changer?

Thanks a lot guys have 2005 Honda Pilot Factory in dash CD changer for all 6 CDs will not play will not eject I stuck an index card in there then press eject now it’s spitting them out Does the changer work now or have you not used it since? I just bought an 05 Pilot and love it, came with a CD in the main slot and two in the changer.