Why does my Mitsubishi Eclipse not turn on?

Injectors Computer Wiring Won’t start Ignition control module Stalls I have installed a keyless push button start in my car (simple fact I was trying to be cheap) but not my car will crank but will not turn over. I’m getting fuel to the injectors, everything is wired properly but still won’t start.

What is the Mitsubishi Eclipse service manual 2000-2002?

2000-2002 Eclipse Service Manual – Tearstone Skip to content Tearstone Mitsubishi Eclipse Performance Specialist Menu Factory Service Manuals 2000-2002 Eclipse Service Manual 2003-2005 Eclipse Factory Service Manual 2006 Eclipse Factory Service Manual 2006 Mitsubishi Eclipse Technical Information Manual Performance Tech Technical Installations

When to troubleshoot a Mitsubishi 3.0L V6 engine?

The information in this article is specific to the 1989 3.0l V6 motor. Many aspects of this procedure are common to all 3.0s, but it is advisable to consult a service manual before you troubleshoot your own engine.

Where is the transmission on a Toyota eclipse?

If you look under the hood on the driver’s side, you will see the transmission. There is a bolt there, take a 17mm socket and take that bolt out. If fluid comes out then you have plenty, if not you will need to add fluid until it starts coming out. ***Note: The manual transmission take gear oil (SAE 75W-90, API Services GL-4).

What are the chapters in the Eclipse service manual?

Chapter Selection: Group 00 – General Body and Chasis Group 00E – General electrical Group 11A – Engine Mechanical 2.4L Group 11B – Engine Overhaul 2.4L Group 11C – Engine Mechanical 3.0L Group 11D – Engine Overhaul 3.0L Group 12 – Engine Lubrication Group 13A – Multiport Fuel Injection (MFI) 2.4L Group 13B – Multiport Fuel Injection (MFI) 3.0L

Where are the splice locations in the Eclipse service manual?

Group 55 – Heating and Air Conditioning Group 70 – Component Locations Group 80A – Configuration Diagrams Group 80B – Splice Locations Group 90 – Circuit Diagrams Index 64 thoughts on “2000-2002 Eclipse Service Manual” mike lehrsays: May 21, 2013 at 5:34 am cant find auto speed sensor diagram or manual speed sensor diagram for 00-02 and 02-05

Why do I get error no JRE in Eclipse?

The reason you get this error is because eclipse needs a JRE to launch, which it can’t find. The first place it searches is the current directory, then the eclipse.ini file and then finally the system path. So if the it can’t find the correct jvm(bit versions are different) through any of these three places,…

When to reset the ECU after changing an O2 sensor?

Sometimes an O2 sensor fails, and you need to replace it. Once you’ve replaced your vehicle’s O2 sensor, you’ll need to reset the ECU so it can properly gather information from the new O2 sensor.

Why is there no JDK path in Eclipse?

If you have recently installed JDK in another path after you have installed Eclipse then you may face this issue. This is because the eclipse hard code the JDK path in eclipse.ini when it is setup for the first time. Just change the correct JDK path in eclipse.ini. That should solve this error.

When did Mitsubishi start making the Mitsubishi Eclipse?

The Mitsubishi Eclipse is a sport compact car that was produced by Mitsubishi in four generations between 1989 and 2011. A convertible body style was added during the 1996 model year.

What kind of audio system does Mitsubishi Eclipse have?

A four-speaker audio system comes standard with upper-level trims getting a six-speaker audio system. The automaker also offers a top-end Rockford Fosgate sound system for the premium trim level of SEL. Android Auto and Apple Carplay are provided as standard as well.

Is the Mitsubishi Eclipse Cross a good car?

2021 Mitsubishi Eclipse Cross Interior. 7.0/10. The 2021 Eclipse Cross offers surprisingly a very attractive and pleasant interior considering the price tag. The cabin is nice and uses high-quality materials, the hard plastic bits are neatly tucked away on teh door handles.

What to do if you lose your Mitsubishi Eclipse key?

Generally speaking, you have three options: First, call an automotive locksmith that offers a mobile service for Mitsubishi Eclipse cars. We can help you with that. Second, tow the car to the dealer. Third, order a key online and have the dealer or locksmith cut and program (if necessary) it for you.

When did the Mitsubishi Eclipse remote key come out?

And more. Mitsubishi Eclipse was introduced in 1990. This model has three versions (Mitsubishi Eclipse Cross w/Prox, Mitsubishi Eclipse Cross w/o Prox, Mitsubishi Eclipse) and eight types of keys. Remote Key Fob: 2018 to 2020. Transponder Chip Keys: 2000 to 2013; 2018 to 2020.

How many versions of the Mitsubishi Eclipse are there?

This model has three versions (Mitsubishi Eclipse Cross w/Prox, Mitsubishi Eclipse Cross w/o Prox, Mitsubishi Eclipse) and eight types of keys. Remote Key Fob: 2018 to 2020.

What causes a no spark condition on a Mitsubishi?

Misfire codes that are lighting up the check engine light (CEL) on your instrument cluster. Rotten egg smell coming out of the tail-pipe. When the crankshaft position sensor goes bad on your Mitsubishi vehicle, the car will crank but NOT start. Usually this will cause a No Spark Condition on all of the cylinders. What Tools Do I Need?

How can I tell if my Mitsubishi ignition coils have gone bad?

When one or several ignition coils on your Mitsubishi (or Chrysler Sebring or Dodge Stratus) have gone BAD, you’ll know right away. Your vehicle will display one of the following symptoms: The car will run and idle rough. No power as you accelerate the car down the road. Really bad gas mileage. The vehicle will not start.

Can you test a no start Mitsubishi Sebring?

Testing a No Start-No Spark or misfire condition on your 2.4L (SOHC) Mitsubishi (Chrysler Sebring or Dodge Stratus) is not hard at all and this article will show how to in easy to follow step by step instructions. Also, to use the info in this tutorial you don’t need a scan tool!

What to do when your car won’t start?

Correcting most no-start problems usually involves replacing the alternator, starter or battery, cleaning connections, ignition system repairs, or fuel system repairs. But because there are so many potential causes, the diagnosis is key to understanding how expensive the repair will be. When a vehicle doesn’t start it can be for many reasons.

What happens when the ignition switch fails in a car?

When the electrical portion of the ignition switch fails, the vehicle will permanently or intermittently lose power to certain systems and components, depending on which positio… Read More

Why does starter keep cranking while engine starts and even after?

I installed a new starter motor/starter Selinoid today. The van started right up, but next start the engine kept cranking (even while van was running and after shutting off)…I had to disconnect the battery cable for it to stop. As you can imagine this really freaked me out.

What happens if you forget to test the starter motor?

Most parts stores have jigs on hand to test starter motors – for exactly this reason. In the meantime be aware that this presents a serious fire hazard. If you forget to disconnect the battery, or think you did, but didn’t, the starter motor may catch on fire.

Why does my car not start on YouTube?

(Playback ID: sMi_Z040vV4oU1ZF) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information. Please try again later.

What to do if your car won’t start?

If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: sMi_Z040vV4oU1ZF) Videos you watch may be added to the TV’s watch history and influence TV recommendations.

What causes a car to have a no start problem?

A blown fuse in the starter circuit could be the cause of a no-start problem. Broken or corroded wiring – Damaged or dirty wires to the battery or to the starter solenoid (or wires that are loose) can prevent sufficient power from reaching the starter.

Can a bad solenoid cause a car to not start?

If the starter engages but does not disengage when you let go of the key, the solenoid is likely bad and the starter may suffer significant damage as a result. 6. Sometimes your car starts, sometimes it doesn’t. Intermittent operation can be a sign of a failing starter solenoid. Other issues that present a bad solenoid

Why does my Toyota Tacoma engine not start?

When the computer senses the engine is out of time, it will turn on the check engine light, and the engine may start and stall, or fail to start at all. If the engine runs, it w…

Why does my car not start when I start it?

See links below for detail trouble shooting procedures. This video will guide you through the basic reasons an automobile will not start. The most common cause is a dead battery. Made sure you rule that out properly before checking other things. http://www.youtube.com/watch?v=fx7ZhJ… http://www.youtube.com/watch?v=4uZ_V2…

When the computer senses the engine is out of time, it will turn on the check engine light, and the engine may start and stall, or fail to start at all. If the engine runs, it w…

Why does my car not start after clicking?

The source of providing power to the flywheel is the starter motor. The battery is the source of power for all of the aforementioned components – so when the car won’t start after clicking, this could be due to the flywheel, engine, starter motor, or battery. Let’s discuss the common causes of why the car won’t start due to clicking.

Why does my Honda Civic make a clicking noise?

To test the power cable, you need to find a way to measure the voltage seen at the starter motor terminals, not just at the battery. It may be as simple as a loose connection on the starter motor terminals. This happened to me about 3 weeks into my ownership of a then ten-year-old 2003 Civic.

Why does my radio make a clicking noise when I start the car?

That’s right, the radio is going to die because it is switched off during starting to ensure as much power as possible goes to the starter. This sounds like a solenoid problem on the starter. Put a multi-meter on the battery and see how much voltage you are getting out of your battery. Should be around 13.1+vdc.

Why does my Mitsubishi Eclipse Engine not start?

When turning the ignition key, I can listen the engine is turning but the car won’t start working completely, no matter what I do. The fuel pump is working correctly and it has electrical current, but still the engine won’t start. The computer detected a failure in the crankshaft sensor, can it be that the cause of my problem?

What do you say when your car won’t start?

When your car’s engine won’t start and all you hear is a rapid clicking noise, you’re likely to mutter, “Darn” (or perhaps another four-letter word) and instantly think that something is wrong with the battery. You would probably be right.

Why is my Check Engine light not turning on?

Here are the four most common symptoms of a bad ECM computer: There are many reasons your Check Engine light can turn on. These range from emissions problems to faulty O2 sensors to problems with the ECM. If your car seems to run fine but the Check Engine light won’t turn off, your ECM may be at fault.

Why does my Toyota Prius not start up?

If you get no lights and your battery is working, the ignition switch could be to blame. If you get dash lights, then turn the key to start to see if the lights go out on the dash. If the lights go out, your ignition switch is okay. Starter Connection – Corrosion on the starter can keep the car from starting.

Can a bad ECM cause a car to not start?

Of course, there are other reasons a car may not start, including a bad starter or a blown alternator. If you’ve replaced these parts and your car won’t start, your ECM is the most likely cause. Once again, you’ll need to take your car to a mechanic to be sure.

Navigation