Why does my Mitsubishi Eclipse Engine not start?

When turning the ignition key, I can listen the engine is turning but the car won’t start working completely, no matter what I do. The fuel pump is working correctly and it has electrical current, but still the engine won’t start. The computer detected a failure in the crankshaft sensor, can it be that the cause of my problem?

What to do if Java Eclipse does not start?

If eclipse (none of them) doesn’t launch at all and there’s not even an error message, uninstall Java 8 Updater and reinstall Java 8 from scratch, this should work. Have luck! Try to install Eclipse into a folder without spaces.

Why does eclipse not start when I run the Exe?

I’ve added the VM to the config, still nothing. I use Windows 7 and the standard Eclipse for Java IDE. IF it Windows, Right click on My Computer, Click Manage. It will open the Computer Management, and goto Event Viewer -> Windows Log -> Application, will display the exact error message for unsuccessful Eclipse launch.

How to fix eclipse launch error in Windows 7?

I use Windows 7 and the standard Eclipse for Java IDE. IF it Windows, Right click on My Computer, Click Manage. It will open the Computer Management, and goto Event Viewer -> Windows Log -> Application, will display the exact error message for unsuccessful Eclipse launch. Can you please update your question with that error code and msg?

Why does my car engine won’t start?

My Engine Turns Over OK But It Won’t Start If your engine won’t crank or turn over, go HERE. So you know your battery is good and the starter works OK because the engine turns when you try to start it. You crank and crank and crank but it just won’t run. There are many reasons why an engine won’t start. It’s usually something simple.

Why does my Toyota Tacoma engine not start?

When the computer senses the engine is out of time, it will turn on the check engine light, and the engine may start and stall, or fail to start at all. If the engine runs, it w…

What makes a MerCruiser engine not start up?

1. A bad key switch. 2. A blown ignition fuse. 3. A bad harness connection or bad harness. 4. A bad shift cable. 5. A faulty Shift Interuptor Switch on the shift plate assembly. 6. A shorted tachometer. 7. A removed or faulty Safety Lanyard Switch. 8. A bad ignition coil.

This excessive pressure pushes more gasoline into the cylinders causing the engine to stall. A symptom of a bad fuel pump check valve is when the Mitsubishi Eclipse engine does not start.

How does the Mitsubishi Eclipse fuel pump work?

The Mitsubishi Eclipse fuel pump utilizes two check valves to control fuel pressure and correct fuel flow through the gas lines. Different recalls on the Eclipse affect the operation fuel pump check valve. Once the fuel pump check valves begin to have problems, different symptoms develop in the performance of the Eclipse engine.

What happens when the timing belt breaks on a Mitsubishi Galant?

Aftermath: I found a video online for 2003 Mitsubishi Galant Timing Belt Installation, where the belt had actually broke, however, the driver had only been going about 5 mph and after he replaced the belt, everything was fine. In my case I had been going about 20 to 25 mph and the belt slipped.

How can I tell if my Mitsubishi is leaking?

Simplest test I can think of is check the timing gear is intact and properly aligned then perform a compression test. If there is no compression on one or more cylinders, it’s safe to assume it’s got damaged valve gear. Without pulling the head you can do a leak down test.

When did Mitsubishi start making the Mitsubishi Eclipse?

The Mitsubishi Eclipse is a sport compact car that was produced by Mitsubishi in four generations between 1989 and 2011. A convertible body style was added during the 1996 model year.

What was the horsepower of a 1990 Mitsubishi Eclipse?

Sunroof, cruise control, ABS, central locking and A/C were in base. * The 1990 GS Turbo with a manual transmission was rated at 190 hp, whereas the 1990 GSX with a manual transmission was rated at 195 hp (145 kW). This was for the purpose of offsetting the additional weight of the AWD mechanism (approximately 2,930 lbs Vs 2,570 lbs GVW).

What kind of engine does a Mitsubishi Eclipse Spyder have?

Eclipse Spyder GS: Convertible model equipped with a 141 hp (105 kW) 2.4 L 16-valve SOHC Mitsubishi 4G64 engine. Eclipse GS-T: Upgraded model equipped with a 210 hp (157 kW) and 214 lb⋅ft (290 N⋅m) of torque turbocharged and intercooled 2.0 L 16-valve DOHC Mitsubishi 4G63 engine.

Is there a problem with my 1995 Mitsubishi Eclipse?

Watch out for Crankwalk!!!! This is a great car, fast, cool looking, dreamy handling, comfortable, but, every eclipse GS-T or GSX from 1995-1999 has a good possibility of coming down with “crankwalk”. It’s a $4500 problem with no real permanent solution.

The Mitsubishi Eclipse is a sport compact car that was produced by Mitsubishi in four generations between 1989 and 2011. A convertible body style was added during the 1996 model year.

What causes a Mitsubishi Outlander to not start?

The most common causes that hinders normal starting operation of your Mitsubishi Outlander are dead key fob battery, dead 12v battery, corrosion on battery terminals, bad alternator, clogged fuel filter, broken starter, blown fuse, empty gas tank, immobilizer error or any fault in the electrical system. 1. Weak Battery

What happens when the starter on a Mitsubishi Lancer goes bad?

When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Lancer, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it.

What to do if your car won’t start?

If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: sMi_Z040vV4oU1ZF) Videos you watch may be added to the TV’s watch history and influence TV recommendations.

Why does my Mitsubishi Lancer engine not start?

There are a lot of issues that can cause your Lancer to crank, but not start. The engine needs air, fuel, and a spark in order to run. It is highly likely that if the engine is cranking, but not starting that it has thrown an OBDII code. It is definitely worth it to use an OBDII scanner to check and see if the engine has thrown any trouble codes.

Why does my car not start when I Turn on the engine?

False input or lack of input from sensors like the crankshaft position sensor (CKP) or camshaft position sensor (CPS) can prevent the engine from starting. Also, a bad throttle position sensor (TPS) may cut off the spark to the cylinders. Battery.

What to look for when your engine won’t start?

Check for a blown fuse that may be preventing a circuit from working properly, like the fuel injection or computer system. To operate efficiently, an internal combustion gasoline engine needs a good spark, the right amount of fuel, and good compression (a healthy mechanical condition).

What makes an internal combustion engine not start?

To operate efficiently, an internal combustion gasoline engine needs a good spark, the right amount of fuel, and good compression (a healthy mechanical condition). The lack of any of these three things will prevent your engine from starting.

What happens if fuel pump goes out on Mitsubishi Eclipse?

If the fuel pump relay is bad, you will still get injector fire (just nothing will come out); same goes for the module. I would be focusing on your MFI relay (attached to side of fuel pump relay), the associated fuses, and making sure your crank sensor is working. If the crank sensor goes out, you will have no spark, no fuel, and no injector pulse.

What happens when the crank sensor goes out on a Mitsubishi Eclipse?

If the crank sensor goes out, you will have no spark, no fuel, and no injector pulse. Similarly if key power lines are down to the PCM (via fuse or MFI relay failure), there will be no reference voltages, and therefor no spark, no injector fire

Where is the relay module on a Mitsubishi Eclipse?

The relay module is located on exactly the opposite location, in the driver side of the console, again below the radio area mounted behind the carpet. My concern at this point would not be so much about the fuel pump not coming on, but that you are not getting injector pulse either.

Where is the starter on a car that won’t start?

To figure out why your car won’t start, it helps to know the difference between the starter and the ignition switch. The starter is an electric motor that cranks the engine, effectively starting the car. It is under the hood, usually on the passenger side at the bottom of the motor next to the transmission.

Can a bad ignition switch cause a bad starter?

The first thing to check in these situations is the battery. If the battery is OK, then you have either a bad starter or a bad ignition switch. With a little bit of time and some patience, you can tell which one is the problem. What Else Is Working?

What should I do if my engine won’t start?

You should see a bright spark jumping the gap in the spark tester. If you don’t see a spark, repeat the test. This time, adjust the spark tester to 30KV. If you still don’t see a spark, repeat the test and set the tester to 10KV. If this time you see a spark or no spark, you have a problem with the ignition system.

What does no crank / no start mean?

It started as a no crank/ no start (no click,dash lights came on and didn’t dim, only sound was fuel pump) about a month ago. Initially (when I hadn’t replaced anything yet) out of about 100 crank attempts, around the 80th attempt it randomly started up then died after a few seconds and wouldn’t crank or start again.

What causes a car to have no start?

A bad mass air flow sensor will cause incorrect data to be sent to the computer which will cause a no start condition. Also a clogged fuel pump or bad fuel pressure regulator could be hindering the fuel supply.

What to do if your car won’t crank?

Initially (when I hadn’t replaced anything yet) out of about 100 crank attempts, around the 80th attempt it randomly started up then died after a few seconds and wouldn’t crank or start again. So I replaced the battery, terminals, cleaned connections, replaced battery ground wire, checked other ground wires, replaced alternator and the starter.

This excessive pressure pushes more gasoline into the cylinders causing the engine to stall. A symptom of a bad fuel pump check valve is when the Mitsubishi Eclipse engine does not start.

Can a bad fuel pressure regulator cause an engine to not start?

It would be wise to check the batteries before considering a failure in the fuel pressure regulator. It is also possible that the engine will not start because of issues in the alternator. There are other potential causes why an engine does not start. One of these is a faulty fuel pressure regulator.

What should the fuel pump pressure be to start the engine?

The fuel pump produces much more than just 50 PSI of course but the bare minimum the engine needs to start is 50 PSI. Anything less and it will crank for ever before it starts or not start at all. So, the very first thing you need to do is to verify that the fuel pump is delivering at least 50 PSI of fuel pressure while the engine is cranking.

What are the symptoms of a faulty fuel pump check valve?

Once the fuel pump check valves begin to have problems, different symptoms develop in the performance of the Eclipse engine. A symptom of a faulty fuel pump check valve in a Mitsubishi Eclipse is when the engine hesitates during acceleration.

Why is fuel not being sent to the cylinders?

Fuel or gasoline is not being sent to the cylinders or not enough fuel is being sent to the cylinders so the firing sequence is interrupted. A recall on the 2004 Eclipse concerning the fuel line hose fitting is affecting the performance of the input check valve on the fuel pump and creating this problem.

Can a bad crankshaft sensor cause the engine to stall?

If the crankshaft position sensor or its wiring have any issues, it can cause the crankshaft signal to be cut off while the engine is running, which can cause the engine to stall. This is usually a symptom of a wiring problem, however a bad crankshaft position sensor can also produce this symptom.

Can a bad crankshaft sensor cause a check engine light?

Another issue of a potential problem with the crankshaft position sensor is an illuminated Check Engine Light. If the computer detects a problem with the crankshaft position sensor’s signal, it will activate the Check Engine Light to alert the driver of the problem. A Check Engine Light can also be set off by a wide variety of other issues.

How much does a 2007 Mitsubishi Eclipse Spyder cost?

“Its high-quality automatic top makes Eclipse Spyder a convertible for all seasons and has features you would expect to see on a $40,000 car rather than one that starts under $26,000.” The 2007 Eclipse Spyder is the third in a series of six new Mitsubishi vehicles to be introduced in less than three years.

What’s the top speed of a Mitsubishi Eclipse Spyder?

With the standard six-speed manual transmission, the Spyder GT can accelerate from zero to 60 mph in about seven seconds. Both the four-cylinder and V6 engines feature the Mitsubishi Innovative Valve Timing Electronic Control system (MIVEC) to help optimize engine efficiency and power across a broad engine speed range.

What kind of platform does the Eclipse Spyder use?

The unibody construction of the 2007 Eclipse Spyder is built upon Mitsubishi’s versatile PS platform. As with previous-generation Spyder models, this platform was engineered from the start for coupe and convertible body styles.

Description: Used 2007 Mitsubishi Eclipse Spyder GS with Soft Top, Rear Bench Seats, Audio and cruise controls on steering wheel, 2nd Row Bucket Seats. Look at this 2007 Mitsubishi Eclipse GT. Its Manual transmission and Gas V6 3.8L/234 engine will keep you going.

Where can I buy a 2004 Mitsubishi Eclipse GS Spyder?

Clean CARFAX. 2004 Mitsubishi Eclipse GS Spyder FWD 4-Speed Automatic with Overdrive 2.4L I4 SMPI SOHC 16VBUY FROM AN AWARD WINNING DEALER At Leith Toyota, our goal is to ensure that all of our customers are completely satisfied. Our team consists of true professionals who are dedicated to our customers.

What kind of seats does a 2003 Eclipse Spyder have?

Description: Used 2003 Mitsubishi Eclipse Spyder GS with Hardtop, Soft Top, Rear Bench Seats, 2nd Row Bucket Seats, Fold Flat Rear Seats. New Price!

What happens when the crank sensor goes bad on a Mitsubishi?

When the crankshaft position sensor goes bad on your Mitsubishi vehicle, the car will experience a No Spark No Start Condition. To be a little more specific, the ignition coils will not spark on any of their spark plug wires or boots. Also, the PCM will not create and feed a Triggering Signal to them.

Can a crank sensor be replaced on a Mitsubishi Sebring?

Replacing the crank sensor will solve your ‘no spark no start’ condition on your 2.4L (SOHC) Mitsubishi vehicle (or 2.4L (SOHC) Chrysler Sebring or Dodge Stratus).

Where is the crankshaft sensor on a Mitsubishi Stratus?

The crankshaft position (CKP) sensor on your Mitsubishi Car (or Chrysler Sebring or Dodge Stratus) is located behind the timing belt but testing it is done without removing the timing belt or its components.

What does it mean when your car cranks but won’t start?

Some car owners think that it means that the engine is running. To a technician, it just means that the starter is successfully engaging the flywheel and rotating the engine’s crankshaft. Some technicians will interchange this with the word “cranking.”

What do you need to know when your car wont start?

You need to hear a click from the engine bay load center when you turn the key on. You also need to hear the fuel pump power up and prime the system. If not, double-check those relays mentioned above.

What to do if your car wont start when you turn the key?

If the choke isn’t working, hold your hand over the throat of the carburetor while cranking to close off air. Some TBI systems won’t squirt unless the engine is cranking. They will, however, energize the electric fuel pump for starting when you turn the key.

What to do if your car battery won’t start?

If the replaced battery car won’t start, the first thing to check is whether you replaced the battery correctly. Are the cable clamps tight? Are the cables themselves in good shape?

When to replace battery in Lexus ES350 2007?

One month ago I went to Lexus dealership (PUTNAM Lexus, Redwood City, CA) to get a new battery, as my Lexus ES350 2007 could not start. The battery was 5 years old and it was a time to replace it, as I know the battery could last for about 5 years, so it was right time to exhaust for the old battery.

What happens if you replace the battery in your car?

Also, it’s possible that everything about the battery might be fine, but some key systems could have been damaged or disabled, which could lead to some serious “side effects” for the entire vehicle. Learn which battery is right for your vehicle. Did You Replace the Battery Correctly?

Why does my car not start after I replace the battery?

Evaluating Your Car’s Key Systems for Possible Failure. There are many other possible problems that could lead to the fact that, after you’ve replaced the battery, the car won’t start. One or more of several key systems might not run properly, or there could be a serious malfunction with the electrical system.

If you’re thinking “Replaced battery, car won’t start,” and you know the problem is an incompatible car battery, you have to get informed about the type of battery you need to use by checking a size chart that has the required information. Find an Advance Auto Parts store close to you.

How to troubleshoot a no start Chrysler 2.0L?

Go to: No Start 2: Checking Fuel. CASE 2: Spark was NOT present in all of the cylinders This usually tells you that the ignition coil pack is bad (or missing power) or the crank sensor is bad. It’s usually one or the other, I have never seen both go out at the same time.

What causes a car to have no spark?

Here are the most common causes of a no spark result: CASE 1: Spark was present in all of the cylinders This result tells you three very important things: 1.) the crank sensor is good, 2.) the ignition coil pack is getting power, and 3.) the ignition coil coil packs are good (the ignition coil pack is made up of 2 individual ignition coils).

How can I tell if my car has a no start?

So, my recommendation to you is to check for spark at all of the spark plug wires with a spark tester. Now, when I test for spark, I also test for fuel pressure with a fuel pressure gauge.

What causes a no spark condition on a Mitsubishi?

Misfire codes that are lighting up the check engine light (CEL) on your instrument cluster. Rotten egg smell coming out of the tail-pipe. When the crankshaft position sensor goes bad on your Mitsubishi vehicle, the car will crank but NOT start. Usually this will cause a No Spark Condition on all of the cylinders. What Tools Do I Need?

What makes a Chrysler 2.0L engine not start?

Without spark, the engine will crank but not start. The ignition system of the Chrysler 2.0L, 2.4L equipped vehicles covered by this article use a distributor-less ignition system. More specifically, it uses a coil pack type igntion system.

Can a spark plug be removed from the ignition coil?

Using a regular spark plug will give a false test result that’ll have you chasing the wrong diagnostic path/conclusion and in the process wasting time and money. Do not remove the spark plug wire from the spark plug or the ignition coil while the engine is cranking to test for spark. This method will ruin the ignition coil.

What causes a car to not start when you turn the key?

Failed fuel pump. No Crank Condition The engine does not turn over when you turn the key to start your Chrysler/Dodge/Plymouth vehicle. This is usually due to: Failed starter motor. Failed neutral safety switch. Failed ignition switch. Locked up engine. This tutorial is geared toward a cranks but does not start Condition.

Where to find the 2000-2002 Eclipse service manual?

64 thoughts on “2000-2002 Eclipse Service Manual” mike lehrsays: May 21, 2013 at 5:34 am cant find auto speed sensor diagram or manual speed sensor diagram for 00-02 and 02-05 need both auto and manual for both these years 01 eclipse and 03 eclipse doing auto to manual swap Reply

What happens when a fuel pump relay goes bad?

If the fuel pump relay has an issue while the vehicle is operating it will cut off power to the fuel pump, which will cause the engine to stall. A faulty relay may allow the vehicle to be restarted a short while later, while a completely failed relay will not.

Where can I find the Mitsubishi Eclipse service manual?

Factory Service Manuals 2000-2002 Eclipse Service Manual 2003-2005 Eclipse Factory Service Manual 2006 Eclipse Factory Service Manual 2006 Mitsubishi Eclipse Technical Information Manual Performance Tech Technical Installations Billet 4G64 Fuel Rail Adapter 2000-2002 Eclipse Service Manual Click here for full service manual Chapter Selection:

Why does my truck not start in cold weather?

My truck won’t start in cold weather unless I use starting fluid. I use starting fluid. I’ve replaced the temp a year old. I was told it could be the maf with the temp sensor. Can anyone help me figure it out? Bad or low compression could cause this. We will hope that isn’t it though!! There should also be an intake air temp sensor.

What happens when you crank a car without starting fluid?

If I crank it without starting fluid in when it’s cold, it sounds like a normal crank, but the engine doesn’t feel like it’s getting close to turning over. As soon as I use the starting fluid, it’ll chug for a second and then fire up.

Why does my Chevy C / K 1500 not start?

Its acting like it wants to start, it all depends on what the temp is. The colder it is the harder it is to start.

Why does my car not start without starting fluid?

This was the crank position sensor. Now the car will not start without starting fluid. When starting fluid is used, the car will start and then run fine. Once you shut it off then try to start it, same thing. The fuel pump turns on when key is in on position. Holding pedal down to try and clear flood does nothing.

Why does my TRCK not start without starting fluid?

What? well my trck will not start up unless i spray some starting fluid in the tbi, but one its on on it runs great with no problem. i just changed my fuel filter, injector and did a tune up on it what can it be. Click to expand… fuel pump man, these things quit alot… has the truck sat for a while?

Why does my car not start when it gets cold?

It may not be providing enough pressure, especially when it gets cold. A coolant sensor – this is the sensor that tells the ECM (the onboard computer) ho cold it is and in turn the computer tells the injectors to make the air/fuel mixture leaner or richer.

Why does my 97 Chevy truck not start?

97 Chevy truck won’t start when it gets cold?? When ever it gets cold my truck will not start. Seems to be fuel pressure but can’t smell any gas like it was flooding. It does’nt even fire like it wants to start.

Navigation