Why does my JBL stereo not come on?
From your description it sounds like you have the JBL Intellisound system with the USB drive. Normally when all lights are off on the stereo and won’t come on you would test the 2 fuses behind the stereo deck and then check the incoming voltage from the power supply.
What do you do when there is no sound coming from your radio?
Started the car, pulled the fuse, waited one minute, turned OFF the car, put the fuse back in, restarted the car. Everything worked great. BTW, it is the 20A Multimedia Fuse on the 2013 Elantra Ltd. 59 people found this helpful. Paper clip also worked For 2012 Elantra Ltd.
Why does my radio not work on my Deck?
If there is a break in the wire or wiring harness or moisture in the harness this could keep it from working. If the wire and wiring harness is ok then you have a bad sub woofer. Check for proper voltage with a multi-meter on the harness coming from the deck. Thanks for your very thorough response! I’ll start with the fuses!
Why does my car stereo have no sound?
This can be due to your car stereo overheating or shorting out. This means that your radio has burned up and will no longer function. Because it no longer is obtaining any power, it cannot produce signals to the speakers so you have sound. If you’re still wondering why and how to fix a car stereo that has no sound, we’re moving onto the final step!
Started the car, pulled the fuse, waited one minute, turned OFF the car, put the fuse back in, restarted the car. Everything worked great. BTW, it is the 20A Multimedia Fuse on the 2013 Elantra Ltd. 59 people found this helpful. Paper clip also worked For 2012 Elantra Ltd.
How to troubleshoot poor or no AM or FM radio reception?
If you have an amplifier connected, disconnect the amplifier power. If the AM reception now improves, the amplifier is the problem. There is not a fix for this other than lowering the GAIN feature on the amplifier, if applicable. Try resetting the car stereo. There could also be a poor ground connection.
Why does radio static go away when you touch the dial?
Static is a routine annoyance for those of us who still listen to terrestrial radio. You get up to adjust the dial and, just as you put your hand on the knob or button, the reception clears up. You sit back down and, a few seconds later, the sound crackles again.
What should I do if my radio antenna is not working?
The antenna lead should not be connected to any other jack. If applicable, change the tuner settings of the car stereo between the Local/Distant ( LX/DX) station selector to switch the tuner sensitivity.