Why does my Hyundai Sonata airbag light come on?

Why does my Hyundai Sonata airbag light come on?

An airbag module is the brains of your cars Supplemental Restraint System, also known as the SRS. It uses the sensors in your Hyundai to determine what action is necessary when your vehicle has been in an accident or collision. There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts.

How do you turn off the airbag light on a Hyundai?

Turn on the code reader and move the arrows on the menu to the “Erase” function and then press “Enter”. Remove the OBD II code reader from the DLC and start the engine. Look at the instrument panel to make sure the airbag light turned off.

How much does it cost to replace a Hyundai airbag?

At the Hyundai dealer, expect to pay between $800 -$2000 to replace the driver’s airbag. That will include the airbag itself and the labor. Can I replace the airbag with a used unit?

Can you remove the airbag from a Hyundai Elantra?

Removing the airbag from Hyundai Elantra is very easy but requires a lot of patience. There are three locking pins that you will need to press to release the airbag, but since you can’t really see them, you will need to try for several minutes. Eventually, you will be able to release the airbag from the steering wheel.

When does the SRS airbag light light up?

The SRS light can also light up if the vehicle has been in an accident recently. If someone jerks on a seat belt or if the Hyundai breaks suddenly, the airbag module determines that the seat belts need to lock and tighten.

Why does my airbag light keep coming on?

There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts. Another issue could be water damage to the sensors. The SRS light can also light up if the vehicle has been in an accident recently.

When do you need the Hyundai Sonata airbag light reset?

The seatbelts provided enough safety. However, when an accident like a head-on collision occurs, the module senses that both the seat belts need to tighten and the airbags need to deploy to keep the driver as well as the passengers safe. If your airbags have deployed, you will need to get a Hyundai Sonata Airbag light reset or repair service.

Why does the SRS light light up on my Hyundai Sonata?

Another issue could be water damage to the sensors. The SRS light can also light up if the vehicle has been in an accident recently. If someone jerks on a seat belt or if the Hyundai breaks suddenly, the airbag module determines that the seat belts need to lock and tighten.

Why does my Hyundai airbag light come on?

It uses the sensors in your Hyundai to determine what action is necessary when your vehicle has been in an accident or collision. There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts. Another issue could be water damage to the sensors.

The SRS light can also light up if the vehicle has been in an accident recently. If someone jerks on a seat belt or if the Hyundai breaks suddenly, the airbag module determines that the seat belts need to lock and tighten.

Why do I need to Reset my airbag light?

If you answered yes to any of these questions, you may be in need to have your airbag light or module repaired or reset. An airbag module is the brains of your cars Supplemental Restraint System, also known as the SRS. It uses the sensors in your Hyundai to determine what action is necessary when your vehicle has been in an accident or collision.

What can I build with an airbag light?

We build custom engines, minibikes, tractors, and more. If that all sounds interesting to you, please consider subscribing. Thanks for stoppin’ by!

An airbag module is the brains of your cars Supplemental Restraint System, also known as the SRS. It uses the sensors in your Hyundai to determine what action is necessary when your vehicle has been in an accident or collision. There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts.

If you answered yes to any of these questions, you may be in need to have your airbag light or module repaired or reset. An airbag module is the brains of your cars Supplemental Restraint System, also known as the SRS. It uses the sensors in your Hyundai to determine what action is necessary when your vehicle has been in an accident or collision.

How to fix your airbag SRS warning light?

A no cost easy way to reset and fix your airbag SRS warning light. Perform this with the ignition key in the off position. Please subscribe, like and comment. You might also like to watch https://youtu.be/yMXm5IVQW9A Loading…

We build custom engines, minibikes, tractors, and more. If that all sounds interesting to you, please consider subscribing. Thanks for stoppin’ by!

There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts. Another issue could be water damage to the sensors. The SRS light can also light up if the vehicle has been in an accident recently.

Why is the air bag light on on my Hyundai Santa Fe?

Hyundai Santa Fe: I have a 2008 Hyundai Santa Fe. The air bag I have a 2008 Hyundai Santa Fe. The air bag light has been on – now believe electrical problem. Car has turned on parking lights by itself. Keys … read more Automotive Diagnostic Spe… Needed a clock spring recall on the 07 veracruz limited.

Hyundai Santa Fe: I have a 2008 Hyundai Santa Fe. The air bag I have a 2008 Hyundai Santa Fe. The air bag light has been on – now believe electrical problem. Car has turned on parking lights by itself. Keys … read more Automotive Diagnostic Spe… Needed a clock spring recall on the 07 veracruz limited.

Turn on the code reader and move the arrows on the menu to the “Erase” function and then press “Enter”. Remove the OBD II code reader from the DLC and start the engine. Look at the instrument panel to make sure the airbag light turned off.

How can I reset the airbag light on my Hyundai?

You can easily reset the airbag light on your Hyundai from home using a handheld pocket scanner. These are also called code readers or code erase tools. Make sure you get the on-board diagnostics II, OBD II, code reader not the OBD I for your Hyundai.

What does the EBD warning light on a Hyundai Sonata mean?

If the ABS warning light or EBD warning light is on and stays on, the speedometer or odometer/tripmeter may not work. In this case, have your vehicle checked by an authorized HYUNDAI dealer as soon as possible. The driver’s seat belt warning light and chime will activate to the following table when the ignition switch is in “ON” position.

When does the oil light go off on a Hyundai Sonata?

In any instance where the oil light stays on when the engine is running, the engine should be checked by an authorized HYUNDAI dealer before the car is driven again. This light is illuminated when the parking brake is applied with the ignition switch in the START or ON position. The warning light should go off when the parking brake is released.

How to reset the air bag warning light on a Nissan easy?

This is the procedure for resetting the air bag light for all Nissan’s. The vehicle in the video is a 2005 Nissan Xterra. 1. Turn key to the ON position. Wait until the airbag light turns off then immediately turn the key to the off position. 2. Wait 5 Seconds 3. Repeat Steps 1 and 2 two more times 4.

How to turn off the air bag light?

Wait until the airbag light turns off then immediately turn the key to the off position. 2. Wait 5 Seconds 3. Repeat Steps 1 and 2 two more times 4. Turn key on and wait until the air bag light starts to flash slowly 5. Wait 10 seconds 6. Turn off the car 7. Turns it back on and the air bag light should now longer be flashing.

When does the air bag light stop flashing?

The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!

Is it dangerous to have airbag warning light on?

If you’re anything like me, you hate warning lights on your dashboard because it’s your car’s way of telling you to get your shit together. One of the more dangerous lights you can have on is the airbag warning light. Here’s how to diagnose and fix it without the risk of near-face explosions. The work performed is on a 2004 Toyota Camry.

How do you reset an airbag warning light?

Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. A no cost easy way to reset and fix your airbag SRS warning light.

How do you know if your airbag sensor is at fault?

The way you know if the sensor is at fault or not, before scanning your airbag system for faults, is to simply look at the “Passenger Airbag Off” light. If there’s no one in the seat, the light should illuminate.

What should I do if my airbags have deployed?

If your airbags have deployed, you will need to get a Hyundai Sonata Airbag light reset or repair service. You want to make sure your airbags, seatbelts, and all other parts of your Hyundais SRS will work properly if an accident occurs. A dealer is likely to tell you that you need to get a new airbag module, which can cost you upwards of $1,000.

How does an air bag work in an accident?

When accident happens, the air bag will operate and reduce most of the damage for driver and other people on car. Yet many drivers do not know airbag deployment conditions nor its operation to deploy. In this article, we will tell you more about how air bag system works and in what exact conditions airbag would deploy.

What makes an air bag not deploy in a car?

For example, NHTSA said the 1999 Hyundai Sonata introduced a weight sensor designed to prevent the passenger air bag from deploying unless a weight of more than 66 pounds is detected on the passenger seat. Honda introduced a dual stage inflator in its 1999 Acura.

Can a faulty seat sensor cause an airbag light to come on?

Before you decide to bypass the passenger seat sensor, use an airbag scanner to verify that the airbag light is due to the seat weight sensor. If yes, call your dealer to check if there is a recall on these problems. Most car manufacturers will replace the passenger seat sensor free of charge even if they are out of warranty.

Where is the weight sensor on a car?

Passenger Occupancy Sensor, also known as Weight Sensor, Seat Mat, Passenger Occupancy Mat, is installed under the passenger seat’s seat cushion. Its purpose is to send a signal to the airbag module if an adult is sitting on the passenger seat.

You can easily reset the airbag light on your Hyundai from home using a handheld pocket scanner. These are also called code readers or code erase tools. Make sure you get the on-board diagnostics II, OBD II, code reader not the OBD I for your Hyundai.

Why does my Hyundai Elantra have a check engine light?

Has the check engine light turned on in your Hyundai Elantra, Accent, Sonata, Kona, or Santa Fe? It can be alarming seeing an engine warning appear on your dashboard, especially if you’ve never seen it before. A wide array of issues can cause a check engine light to come on, some more serious than others.

Has the check engine light turned on in your Hyundai Elantra, Accent, Sonata, Kona, or Santa Fe? It can be alarming seeing an engine warning appear on your dashboard, especially if you’ve never seen it before. A wide array of issues can cause a check engine light to come on, some more serious than others.

How to check the B1448 airbag light on Hyundai Accent?

If the code is still there. unplug the six terminal connector going to the sensor mat under the passenger seat. Reconnect the battery. With the key in the RUN position check for battery voltage on terminal 1 (red/black wire) and ground terminals 3 & 5 (black wires). Next, check the voltage at terminal 2 in the connector (red/black) wire.

How to turn on the airbag warning light?

If the sensor mat isn’t working properly, trouble codes B1447 and B1448 can set and turn on the Airbag warning light Start by disconnecting the battery terminal from your car battery. Wait for at least 3 minutes for the airbag system to power down. Clear everything from the under the passenger seat.

Why does the air bag signal keep showing?

I own a 2012 Hyundai Sonata SL 2.0T. I have another problem with the car. Its regarding to the airbag. The airbag signal light keeps showing … read more It shows Air Bag off light How do I turn it off. On I mean. It shows Air Bag off light How do I turn it off JA: Is anything interfering with the seatbelt latch?

I own a 2012 Hyundai Sonata SL 2.0T. I have another problem with the car. Its regarding to the airbag. The airbag signal light keeps showing … read more It shows Air Bag off light How do I turn it off. On I mean. It shows Air Bag off light How do I turn it off JA: Is anything interfering with the seatbelt latch?

What kind of car is the Hyundai Sonata?

The Hyundai Sonata is a mid-sized car made since 1985 by the South Korean manufacturer Hyundai. The Sonata has high-quality materials and ample seating area. Detailed below are the Hyundai Sonata dashboard warning lights.

What does the seat belt warning light mean on a Hyundai Sonata?

The Hyundai Sonata Seat Belt Warning Light will blink for approximately 6 seconds each time the ignition is turned on. It is regardless of whether the belt is fastened or not. The Hyundai Sonata airbag warning light glows red for about 6 seconds when the ignition switch or engine start / stop button is in the ON position.

What do the symbols on a Hyundai Sonata mean?

The turn indicator symbols represent the indicator is switched on of Hyundai Sonata. This Hyundai Sonata dashboard warning light informs the driver that the exterior lights/sidelights/parking lights/headlights are switched on. This symbol represents the front fog lights of Hyundai Sonata being switched on.

When does the Hyundai Sonata airbag warning light go on?

It is regardless of whether the belt is fastened or not. The Hyundai Sonata airbag warning light glows red for about 6 seconds when the ignition switch or engine start / stop button is in the ON position. If the warning light stays on, it means there is a malfunction with the airbag / SRS (Supplemental Restraint System).

The Hyundai Sonata is a mid-sized car made since 1985 by the South Korean manufacturer Hyundai. The Sonata has high-quality materials and ample seating area. Detailed below are the Hyundai Sonata dashboard warning lights.

The turn indicator symbols represent the indicator is switched on of Hyundai Sonata. This Hyundai Sonata dashboard warning light informs the driver that the exterior lights/sidelights/parking lights/headlights are switched on. This symbol represents the front fog lights of Hyundai Sonata being switched on.

What does the Mil mean on a Hyundai Sonata?

The Hyundai Sonata Engine Check Light or Malfunction Indicator Light (MIL) indicates a failure in the engine control system. This system monitors emissions, and this dash light indicates a failure in the engine/emission control system. This symbol represents the rear fog lights of Hyundai Sonata being switched on.

The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!

How much does a new airbag module cost?

A dealer is likely to tell you that you need to get a new airbag module, which can cost you upwards of $1,000 dollars. Whether you get a used or new module, it will need to get re-programmed to your vehicles VIN. This can be part of a lengthy, difficult, and costly process.

What is the trouble code on a Hyundai Accent?

It is impossible to troubleshoot and airbag system without the trouble code. Trouble code B1448 is a common airbag trouble code on Hyundai Accent vehicles. What is a B1448 trouble code? Codes B1447 and B1448 are related to the Occupant Classification System (OCS). The OCS is used to determine whether a child or an adult is in the passenger seat.

What to do if your airbag light is not working?

Spray the connector plugs with an electronic cleaner and restart your car. If you can not find any problems there, you should really get an OBD2 scanner or let a workshop read the codes; otherwise, you will just guess the problem out of the dark. Founder, owner & main author of Mechanic Base.

Do you need scanner to read airbag trouble codes?

Working with your airbag system is crucial, and therefore, always read the trouble codes with an OBD2 scanner to get an idea of where to start your troubleshooting. Do never clear the trouble codes before you fix the problem caused by the airbag light.

Where can I find the air bag light code?

You can read the number of flashes and it will give you a code (codes listed below for ford ranger and Mazda B3000). If your code is not listed, just google the year, make and model of your car along with “airbag light code” (ex. 2001 Mazda B3000 airbag light code).

A no cost easy way to reset and fix your airbag SRS warning light. Tsukasa Azuma is an awesome car blogger of Car From Japan. He owns a car repair shop at downtown Osaka, and he put all that experience to good use in his sharing posts.

When does the passenger seatbelt light come on?

Passenger seatbelt light comes on when no passenger is in… When I’m driving with no one in the passenger seat (kids in the back), the passenger seat belt light flashes on and beeps. I drive a 2013 Subaru Impreza.

Why is the airbag light on when the seat is vacant?

When the seat is occupied it should turn off implying that the airbag system is online and functioning. If the light is off when the seat is vacant or vice-versa, there could be a problem with the sensor. You will want to first check the wiring and harness underneath your seats to see if everything is connected.

Where are the airbags on the front seat?

This sensor ensures that babies on the front seat don’t get their airbags crashing on the infants head during an accident, but your adult buddies are guaranteed a bag of air to the face should things fall apart. The airbag clock springs are found on your steering wheel.