Why does my fuel injected motorcycle have a choke?
A choke valve/cable is designed to restrict the flow of air in the carburettor of an engine. This helps enrich the fuel-air mixture, improving the ability to start an engine in low temperature conditions.
Do you need to let fuel injected motorcycles warm up?
No, it does not. For fuel injection engines, you don’t have to warm up your motorcycle for long – it could even damage your bike if you did. But that does not remove the need for a proper pre-ride warm-up.
Does Kill Switch damage bike?
This will not damage the bike. The kill switch will normally shut down all the electrics on a motorcycle. Which means, if it’s off, you’re not going to start the bike. Or turn on the headlight, turn signals, nothing.
Do EFI engines have a choke?
Fuel injected cars do not have a choke. When the air conditioner or lights are on, the ECU detects the extra load and adjusts the idle accordingly.
Will an air cooled motorcycle overheat?
An air-cooled motorcycle will not overheat in slow-moving traffic, provided that the air-fuel mixture and idle speed are correct, the valve clearances are within specification, and the oil is changed regularly.
How long can you run an air cooled engine?
Which means, as long as you are riding with enough speed, the airflow will work its magic and cool down your engines – no matter the range. Driving long distances on air cooled motorcycles is not new. A lot of bikers have been doing this since forever – some goes to even 100 miles without stopping.
How long should I let my motorcycle warm up before riding?
To wrap it up, warm up your motorcycle for at least a minute before heading out. Just use the time to buckle your helmet, slip your gloves on or finish other preparations. That way you’re not wasting time – and you’re likely saving your motorbike engine from wear.
What is the best way to turn off a motorcycle?
Either way, here are a few ways you can turn off you motorcycle.
- Use the key to turn the ignition off.
- Push the kill switch then use the key to turn off the ignition.
- Put the kickstand down then use the key to turn off the ignition.
- Use the start/stop button.
Why does a motorcycle engine need fuel injection?
The Combustion chamber in your engine will never be shaped like this. Intake and exhaust channels, engine cooling and flywheel weight will have an influence too. So, the engine needs a mixture slightly richer than the ideal 14,7:1 to run properly – More on the best AFR later.
What’s the difference between air cooled and liquid cooled motorcycles?
On commuters or budget-friendly bikes, or in some cases, large V-twin motorcycles such as the Harley-Davidsons, air-cooled engines are most widely used. These engines are equipped with outer fins that increase the motor’s surface area, thus increasing the airflow around it.
How much air does a motorcycle engine need?
The engine of the bike has to be provided with an air fuel mixture for proper combustion inside. So the mixture if not proper does not provide a proper balance leading to improper performance. For an average bike using unleaded fuel the mixture has to be in the range of 12-14.7 parts of air to one part of fuel.
Which is the cheapest fuel injected motorcycle in India?
Of course, the downside comes in the form of more complexity and ergo, a higher cost. For those of you willing to play by those rules, here’s a list of the most affordable fuel-injected motorcycles you can buy in India today under Rs 1.5 lakh. The Bajaj Dominar uses a triple-spark engine based on the KTM 390 motor.
Can a motorcycle be converted to a fuel injection system?
You can also convert an older motorcycle into a fuel injection system with motorcycle fuel injection conversion kits. Injection kits allow you to remove that troublesome carb and add fuel efficient and effective fuel injection. Programmers control the flow of gas to your engine.
Why are air cooled fuel injection kits so important?
Ability to data log/download and monitor all sensors, systems, maps and download or send over internet to tech support for tuning assistance. Cold start and warmed systems for better starts. Cleaner mid range, better torque. Better range of usable power, not as sensitive to atmospheric change like carburetion.
Why do fuel injected engines use a cold start circuit?
Most fuel injected engines utilize a cold start circuit inorder to maintain idle when the engine is cold. This circuit allows for a rich mixture while cold, think of it as a computer controlled choke. Rather than restricting air like a conventioal choke it increases the fuel.
Why does fuel injection have to be in the engine?
One of the items that can coat them is soot from unburned fuel particles, which often occur inside an engine running “fat” — towards the 12:1 end of the air/fuel spectrum. Here’s a real-life view into the quadruple maws of Kawasaki ZX-6R throttle bodies. Photo by Kawasaki Motors Corp. That’s the long and short of things.