Why does my 6×4 Gator keep overheating?
They cooling system seemed to be working – the lower radiator hose was moving cooled water to the motor and the upper hose was returning hot water to the radiator. No leaks were visible (I still have no idea where the coolant on the floor came from – maybe it was residual). Is my machine actually overheating?
How to fix parking brake on Deere Gator HPX?
Mohp4gx035816… I have an earlier 2004 deere HPX 4×4 gator. My problem is I have an earlier 2004 john deere HPX 4×4 gator. My problem is that after running the gator motor and turning it off, the fan keeps turning back … read more Owner Brothers Restoratio… JD Gator turns over but won’t start. It is in neutral.. I
How to fix a John Deere Gator overheating?
Drill a hole in the top of the thermostat, 1/8 inch, ensure you don’t drill where the thermostat closes and seals or where it will be covered by the gasket or sealant. Put the stuff back together, fill radiator, while filling remove the dark bolt on the intake manifold near the center and purge the air out of the system while filling the radiator.
What kind of parts do I need for a John Deere Gator?
While this is not an inclusive list of all the parts for a John Deere HPX 4×4 Gator & Parts List, these are the typical parts that we see purchased for your model. Regardless of your John Deere model, these John Deere parts are used frequently in maintaining and your John Deere HPX 4×4 Gator & Parts List and can be used around your garage.
They cooling system seemed to be working – the lower radiator hose was moving cooled water to the motor and the upper hose was returning hot water to the radiator. No leaks were visible (I still have no idea where the coolant on the floor came from – maybe it was residual). Is my machine actually overheating?
What to do if your John Deere Gator overheats?
1. Remove bleed screw (J) and seal washer located on intake manifold (K). 2. Remove radiator cap and add recommended coolant mixture to radiator until coolant runs out of bleed port.
Why does my John Deere Gator have air pockets?
These things are very susceptible to air pockets since the water pump is very close to the water level at the top of the radiator. Any drop in the water level results in an air pocket at the WP. Topping off the radiator doesn’t necessarily remove the air pocket. It has to be vented at the WP. The water pump is not self-priming.
Where does a leak in a radiator come from?
Take some toilet tissue and systematically check each fixture (or union) on the radiator one-by-one: this should help you to understand where the leak is coming from. Radiator leaks come from one of three places – the body of the radiator itself, the bleed point, valve or tail and the pipe that fills the radiator with water.