Why did my radio stop working out of nowhere?
Blown Fuse: One of the most common reasons for a car radio to stop working is a blown fuse. If the radio itself will not turn on, chances are good that there’s one or more blown fuses causing the problem. This can also cause fuses to blow in rapid succession (you replace a fuse and it blows again shortly after).
Why is my radio on but there is no sound?
Radio comes on, no sound (or it would make a loud static sound if you hit the radio or ramdomly on it’s own), everything else is fine, display, CD works etc.. So I bought an identical used replacement radio on ebay, still not working and the same problem.
Why is the sound not working on my Toyota?
This Toyota has an entertainment fold-down DVD player that was installed at the dealer. SYMPTOM: Head unit appears to be work, however no sound is playing through any speakers. Also, entertainment fold-down DVD player is not working. PROBLEM: Toyota head unit is designed to stop playing sound upon any connection errors.
Why is my Radio not working on my Harley Davidson?
Turn the power on radio off and on and it will work everytime. Ten minutes later it will do the same thing. Bumps in the road seem to have no barring on the problem. It also will do the same thing with a cd in it. HELP Check the faceplate and see if the headset icon is activating when you loose your audio. Any amps in the system?
Why is the radio not working on my corolla?
Our 2012 Corolla lost all sound but the radio still showed as working including bluetooth, CD, etc. My husband had put tires in the trunk to get our snow tires changed and sure enough knocked off the speaker wire and it grounded out.
Radio comes on, no sound (or it would make a loud static sound if you hit the radio or ramdomly on it’s own), everything else is fine, display, CD works etc.. So I bought an identical used replacement radio on ebay, still not working and the same problem.
Why is the radio not working on my Street Glide?
I replaced the battery on my wife’s 2010 Street Glide. Now the radio won’t come on. Any suggestions would be appreciated. A: If you have no power to your radio, check for a blown fuse 1st.
Why is the radio not working in my Subaru?
I was listening to a cd at the time, so I tried the radio tuner, but that produced no sound through the speakers either. The radio still had power, and it still tuned in stations according to the display. I pulled the door pannels off to check the speaker connections.
This Toyota has an entertainment fold-down DVD player that was installed at the dealer. SYMPTOM: Head unit appears to be work, however no sound is playing through any speakers. Also, entertainment fold-down DVD player is not working. PROBLEM: Toyota head unit is designed to stop playing sound upon any connection errors.
Why does my car radio turn off by itself?
The car stereo receiver may shut off or lose power if there is an issue with a loose or dirty connection. If the car stereo has a removable faceplate, clean the metal connectors using a cotton swab. Reset the car stereo to factory specifications. Turn on the car stereo and verify if the issue is resolved.
Why does my radio cut out?
There may be a break, weak point, or loose connection in the wiring between the SiriusXM antenna and the tuner. Or there could be the same issues in the wiring between the tuner and your stereo. This can affect the sound quality and it may cause the radio to cut out often.
Why is the radio not working on my Ford F-150?
I checked 3 fuzes under the dash as indicated by the owners manual as having something (anything) to do with the audio system. All fuzes were tested and are ok. Still no radio. Any ideas?? Same problem. One day everything working fine the pop goes out won’t come back on. If you press the on/off button the time flashes but that’s it.
What kind of radio does 2013 Ford F150 have?
2013 F150 with 35000 miles radio came on and went off periodically for a couple of months, Finally quit. Ford dealer said he ran diag on the system found the radio shot.
How do I reset the stereo on my Ford F-150?
In order to reset the unit, you must locate the security code. After you unplug your negative battery cable or unplug the wires in the back of the stereo, wait a few minutes, then plug it back on. turn your ignition in the on position and wait for the word “code” to come across the screen. Once prompted, enter the code and the unit will be reset.
What to do if your car stereo has no sound?
Set it down on a stable table and hook it up to power. Hook up the ground wire first. Then attach a remote turn on device. If the power light doesn’t go on, your unit is dead. If it does, you have power. Now you will need to check the amplifier’s output by connecting it to a test speaker.