Why are the brake lights not working on my Hyundai Elantra?
2013 Hyundai Elantra Limited. Brake lights are not working. I checked all the fuses and the brake light switch. The 2013 Hyundai Elantra Limited. Brake lights are not working. Subaru and Nissan factory t… Brake lights aren’t working. Level ok. 2013 Elantra. Fuse Brake lights aren’t working JA: Have you checked the brake fluid?
Where to check for blown fuses in 2013 Hyundai Elantra GT?
The video above shows how to check for blown fuses in the engine bay of your 2013 Hyundai Elantra GT and where the fuse box diagram is located. If your map light, stereo, turn signals, heated seats, headlights or other electronic components suddenly stop working, chances are you have a fuse that has blown out.
What to do if your brake lights are not working?
If none of the brake lights are working, we are going to follow the circuit from the fuse box back to the brake pedal. At some point the power is not getting from point A to point B. We just have to find where that is. Please note that tail lights can work even if the brake lights are burned out.
Where is the fuse on the brake light?
You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights. In case if the fuse is blown, change it with a new one.
2013 Hyundai Elantra Limited. Brake lights are not working. I checked all the fuses and the brake light switch. The 2013 Hyundai Elantra Limited. Brake lights are not working. Subaru and Nissan factory t… Brake lights aren’t working. Level ok. 2013 Elantra. Fuse Brake lights aren’t working JA: Have you checked the brake fluid?
The video above shows how to check for blown fuses in the engine bay of your 2013 Hyundai Elantra GT and where the fuse box diagram is located. If your map light, stereo, turn signals, heated seats, headlights or other electronic components suddenly stop working, chances are you have a fuse that has blown out.
If none of the brake lights are working, we are going to follow the circuit from the fuse box back to the brake pedal. At some point the power is not getting from point A to point B. We just have to find where that is. Please note that tail lights can work even if the brake lights are burned out.
You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights. In case if the fuse is blown, change it with a new one.
Is there a recall on the 2013 Hyundai Elantra?
Hyundai is recalling the 2013 Hyundai Elantra sedan to fix a problem with its brake lights. More than 64,000 vehicles in the U.S. are affected. The Elantra’s problem is rooted in its brake pedal stopper pad, which was manufactured by Kyung Chang industrial.
Do you need to change tail light bulbs in Hyundai Elantra GT?
Not only will the lights on your Elantra GT be brighter, you decrease the likelihood you will need to change any of the bulbs again in the near future. A burnt out bulb in the taillight cluster of your Elantra GT is an excuse for a police officer to pull you over. Check your bulbs frequently and change burnt bulbs promptly.
Brake lights are one of the most critical safety features that your Hyundai Elantra has. They let other drivers know when you are slowing down, and that they need to slow down too. If your brake lights aren’t working, you’re way more likely to get rear ended than normal.
What to do if your brake light does not work?
If the turn signal switch is not working properly, your brake light can also not work. Find the wire that connects the brake light and the turn signal switch and replace it. Chances are that this action would solve your problem. If not, then you have no other choice but to visit a mechanic or an electrician.
Why are the brake lights not working but the tail lights are?
Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location). Push the bulbs and turn them counterclockwise to remove from the socket.
Where are the brake lights on my car?
You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights.
Brake lights are one of the most critical safety features that your Hyundai Elantra has. They let other drivers know when you are slowing down, and that they need to slow down too. If your brake lights aren’t working, you’re way more likely to get rear ended than normal.
Why are the rear lights on my car not working?
The causes for dysfunctional rear lights are: 1 Burnt bulbs 2 Blown out fuse 3 Damaged wiring 4 Electrical issues
Where are the brake lights and tail lights?
In most European cars, the same bulb does the job of the tail and brake lighting. However, it has double filaments, allowing one set still working while the other set is burnt. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood.
Where was the 2013 Hyundai Elantra last serviced?
Last serviced in Sanford, FL on 05/03/21 • Vehicle serviced • Wiper (s) replaced • Oil and filter changed • Tire condition and pressure checked • Tires rotated • Vehicle washed/detailed • Wheel locks removed. Mileage: 115,040 miles Body Type: Sedan Color: Red Engine: 4 Cyl 1.8 L
How many miles does a 2013 Hyundai Elantra get?
Mileage: 26,243 miles Body Type: Sedan Color: Blue Engine: 4 Cyl 1.8 L No accident or damage reported to CARFAX. Purchased on 11/18/13 and owned in PA until 06/08/21. Driven an estimated 8,825 miles/year.
When was the Hyundai Elantra last serviced in Concord NC?
Last serviced in Concord, NC on 05/15/21 • Vehicle serviced • Maintenance inspection completed • Induction system serviced • PCV valve replaced. No accident or damage reported to CARFAX.
When to replace headlight bulb in 2013 Hyundai Elantra?
See better and drive safer with new 2013 Hyundai Elantra headlight bulbs. They will make you more visible to other drivers while lighting up the road ahead so you can drive with confidence not matter what the weather conditions are like outside. Be sure to replace your 2013 Elantra headlight bulb as soon as it burns out.
What kind of car is 2013 Hyundai Elantra?
Autotrader has 1,034 Used Hyundai Elantra cars for sale, including a 2013 Hyundai Elantra GLS, a 2013 Hyundai Elantra GLS Sedan, and a 2013 Hyundai Elantra GT.
Why did the air bag light come on on my 2013 Hyundai Elantra?
The airbag light came on my 2013 Hyundai Elantra gt at the 61,000 mile mark. Took it in to the dealership to find out the problem and it was determined the the clock spring was found defective from the manufacturer. They were willing to replace the clock spring but at a cost of $495 dollars.
How many miles does a Hyundai Elantra get?
Mileage: 115,040 miles Body Type: Sedan Color: Red Engine: 4 Cyl 1.8 L No accident or damage reported to CARFAX. Purchased on 01/24/13 and owned in TX until .
Is it dangerous to drive with brake lights not working?
Driving at night with either brake lights or tail lights not working is dangerous for you and other drivers on the road. It takes a long time to notice when the brake lights not working but tail lights are or vice versa. It is so because you won’t know what is happening in the backside while driving until someone points it out.
Where is the brake light switch on my car?
Fuse Box and Light Switch. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm.
Hyundai is recalling the 2013 Hyundai Elantra sedan to fix a problem with its brake lights. More than 64,000 vehicles in the U.S. are affected. The Elantra’s problem is rooted in its brake pedal stopper pad, which was manufactured by Kyung Chang industrial.
When did my Hyundai Elantra GLS not start?
The engine of my 2013 Hyundai Elantra GLS failed to start the morning of 1/3/17 while parked in the driveway. I turned the key in the ignition numerous times without success. The dash lights would illuminate, but the car wouldn’t start or even try to turn over.
Why does my Hyundai Elantra have no acceleration?
It seems that if the AC and Defrost are both on and there is a sudden need to accelerate the car completely stalls. For about a second or two there is a sudden (immediate) loss of power but the car will just as suddenly reset and drive normally. There is no surging before the problem or after.
The engine of my 2013 Hyundai Elantra GLS failed to start the morning of 1/3/17 while parked in the driveway. I turned the key in the ignition numerous times without success. The dash lights would illuminate, but the car wouldn’t start or even try to turn over.
What are the problems with the Hyundai Elantra battery?
Headlights Engine Windows Radio Battery Serpentine belt Wife and I were out shopping today, Stopped at the market to pick up groceries. Headlights and radio work fine, but engine would not turn over. Got a jump start from Hyundai roadside assistance (good service) and drove the car for about 30 minutes to recharge the battery.
How to change tail light bulb in 2013 Hyundai Elantra?
This video demonstrates how to change a burnt out taillight bulb on your 2013 Hyundai Elantra GT. Some of the other bulbs in the tail light cluster such as the brake light or turn signal may also function as the tail light in your Elantra GT.
Why is my rear brake light not working?
The rear brake light actually melted. I have never had so many issues with rear lights in a car. Tl-the contact owns a 2013 Hyundai Elantra. The contact stated the the rear taillights had to be replaced due to the brake light remaining illuminated even when the vehicle was turned off.
The rear brake light actually melted. I have never had so many issues with rear lights in a car. Tl-the contact owns a 2013 Hyundai Elantra. The contact stated the the rear taillights had to be replaced due to the brake light remaining illuminated even when the vehicle was turned off.
What happens if your Elantra loses power while driving?
Engine will still run, just won’t perform as it should. Your local Hyundai dealer should be able to scan the ECM and pick up on a trouble code for that. My 2012 Elantra just did same thing while I was on interstate and I was run off road because I could not accelerate above 20 mph.
Why does my Hyundai wrangle dash light not work?
Dash lights don’t work at all… I checked all the fuses, and took out the speedo and don’t see anything wrang. My dash light wont work but the exterior light are fine. Is there anyway the bulb (s) may be out? I can’t seem to find the problem and it’s a big hassle…
Where is the fuse box on a Hyundai Elantra?
Fuse box located. The fuse box for the lights and other electrical accessories will be found in the backside of multi box located in the left side of driver. Inside the box you will find a list showing the circuits protected by each fuse.
What does it mean when your brake lights don’t work?
Touch each fuse connector with a multimeter lead. You should hear a beep sound if the fuse is in good condition (if you are using the Continuity setting), or close to zero Ohms (no resistance), if you are using the Ohms scale. This means your fuse is good. If you hear no beep or your meter reads infinity resistance, the fuse is no good. 4.
Why is the brake warning light on on my Hyundai Elantra?
Hyundai Elantra Brake Warning Light Causes The brake warning light indicates that your Elantra has detected that one of its major brake components has failed, typically detected through a loss of pressure. You’ll feel a loss of pressure that manifests itself in the form of a “mushy” brake pedal.
Fuse box located. The fuse box for the lights and other electrical accessories will be found in the backside of multi box located in the left side of driver. Inside the box you will find a list showing the circuits protected by each fuse.
What to do when your brake lights are not working?
In the situation when brake lights are not working properly, you need to make sure that the power is going through and check the fuse. If the brakes lights are turned on at the same time as turn signal lights, you need to bring it to the mechanics for a check.
How to fix the stop light indicator on a Hyundai?
Hyundai stop light indicator, brake light switch fix and replacment. – YouTube Hyundai stop light indicator, brake light switch fix and replacment. If playback doesn’t begin shortly, try restarting your device.
In the situation when brake lights are not working properly, you need to make sure that the power is going through and check the fuse. If the brakes lights are turned on at the same time as turn signal lights, you need to bring it to the mechanics for a check.
Why are the brake lights on my Hyundai Elantra not working?
The contact owns a 2013 Hyundai Elantra. While the vehicle was parked, the battery died and the vehicle had to be jumpstarted in order to get to the contact’s residence. The battery was replaced and the brake lights remained illuminated. The contact entered the vehicle and could not shift gears even when the brake pedal was depressed.
Hyundai stop light indicator, brake light switch fix and replacment. – YouTube Hyundai stop light indicator, brake light switch fix and replacment. If playback doesn’t begin shortly, try restarting your device.