Why are my power windows not working on my Jeep Grand Cherokee?

Why are my power windows not working on my Jeep Grand Cherokee?

While some other SUVs were manufactured with body-on-frame construction, the Jeep Grand Cherokee has always used a unibody chassis. Why won’t my power Windows work? I have a 1999 jeep grand Cherokee with the v8 engine and none of my Windows will go up or down.

Why is the radio not working on my Jeep Grand Cherokee?

Lead Auto Tech/Shop forem… The radio/GPS display on my 2006 Grand Cherokee isn’t working. Once in a while when I start the vehicle it displays but usually goes out after 10-15 minutes, sometimes sooner. The radio station that i … read more

Why are the windows on my Jeep Laredo not working?

95 Grand Cherokee Laredo 5.2 had no windows working, looked at drivers door and spliced split black wire together and the 2 drivers windows work! The passengers will not move from either control? Check all fuses. Do you think it’s the switches on just the right side? Or maybe a fuse in the engine box? 24 people found this helpful.

What causes a power window to not work?

When you have a power window not working condition, most DIYers automatically suspect a bad power window motor. That’s usually not the case. If you have a power window not working issue, the fault is usually a broken window regulator, bad window switch, or a problem in the power window wiring. Passenger window not working

While some other SUVs were manufactured with body-on-frame construction, the Jeep Grand Cherokee has always used a unibody chassis. Why won’t my power Windows work? I have a 1999 jeep grand Cherokee with the v8 engine and none of my Windows will go up or down.

Why does my Jeep Grand Cherokee sunroof not work?

The power locks on the drivers side doesn’t work but the power locks on the passengers side does work. My sunroof works also. Can someone please give me some helpful advice on what’s wrong and how to fix it.

Why are the power windows on my car not working?

The cause is a cracked or broken wire in the rubber boot between the door and the vehicle. Pull the boot of the plastic casing and find the wire. Mine was a broken black wire. The white plastic casing will slide out if you pull on the to plastic pieces at the top and bottom of the casing.

What to do if your power door lock is not working?

If fuse is ok, i would first check the wires in the boot between the door and the body for any broken wire. If this is ok, you will have to measure on the window motor connector to see if power is there. Regarding the hatch door lock, there most probably the lever connecting the actuator to the actual lock has become loose.

The power locks on the drivers side doesn’t work but the power locks on the passengers side does work. My sunroof works also. Can someone please give me some helpful advice on what’s wrong and how to fix it.

The cause is a cracked or broken wire in the rubber boot between the door and the vehicle. Pull the boot of the plastic casing and find the wire. Mine was a broken black wire. The white plastic casing will slide out if you pull on the to plastic pieces at the top and bottom of the casing.

If fuse is ok, i would first check the wires in the boot between the door and the body for any broken wire. If this is ok, you will have to measure on the window motor connector to see if power is there. Regarding the hatch door lock, there most probably the lever connecting the actuator to the actual lock has become loose.

Why is my power window not working properly?

If one power windows fails to move when you press the switch to lower it, the most likely causes would be a bad switch, a bad power window motor, a fault in the wiring circuit between the door switch and the door motor, or a wiring fault in the motor power or ground circuit.

Why is my passenger window not working but the driver window is working?

When passenger windows don’t work, but the driver’s window does, chances are high that you’ve got a bad master switch in the driver’s door or a broken wire in the driver’s door hinge area. Second: Power window motors only have two wires.

Why does my driver side window not go back up?

Opposite of the typical window problem, | Jeep Cherokee Talk Driver side window won’t go back up. Help! Opposite of the typical window problem, I have the opposite of the typical window problem where you can only control the windows from the driverside.

Is the power door lock on a Jeep Grand Cherokee working?

This feature is not available right now. Please try again later. 2004 Jeep grand cherokee power door locks and windows stopped working. found the problem and fixed it. Also the interior lights would not turn off and the jeep did not register as an open door. the FoB lock would not work either. Loading…

What was the problem with my Jeep Grand Cherokee?

2004 Jeep grand cherokee power door locks and windows stopped working. found the problem and fixed it. Also the interior lights would not turn off and the jeep did not register as an open door. the FoB lock would not work either. Loading…

How to open a Jeep Grand Cherokee rear passenger window?

Remove two screws – one a Phillips head in the read door inside pull (armrest) and the other a Torx #15 just under the inside door release lever, Then pry the interior door panel off; release the two door latch rods, unplug the electrical wire to the window motor by first unlatching it.

Is there a problem with my Jeep garage door?

After some searching on the internet i found out that this problem happened already with quite some other WJ’s. Most of the time the black ground wire in the rubber boot between the door and the body breaks. Sometimes the orange wire breaks.

Opposite of the typical window problem, | Jeep Cherokee Talk Driver side window won’t go back up. Help! Opposite of the typical window problem, I have the opposite of the typical window problem where you can only control the windows from the driverside.

What to do when your power windows won’t work?

If all of the power locks and power windows are inoperative from both front doors, go to Step 3. (3) Check the fused B (+) fuse in the Power Distribution Center (PDC). If OK, go to Step 4. If not OK, repair the shorted circuit or component as required and replace the faulty fuse.

Why is my rear passenger window not working?

Three possibilities: 1) Bad window motor; 2) Broken wire going to the door; 3) Bad solenoid The solenoid for the rear window is in the front door, and if you can hear it making noise in the door when you press the window up button, that’s not the problem.

Where is the broken wire on a Jeep Grand Cherokee?

The broken wire will be under that rubber hose-like thing you see running between the inside edge of the door and the door jamb. Pry that back and look inside it – one of the wires will be broken and require repair by stripping insulation off, twisting the wires together, soldering them and wrapping securely with electrical tape.

Why does my door lock not go back up?

Also make sure the ground is good quality. The combo of the lock not working goes against a bad motor and more toward shotty connections. Dielectric grease does wonders sometimes. Did you check the wires in the door hinge boot?

Where are the fuses for the power windows?

You may also have to check the wiring harness that goes into the driver door, hinge side. With the driver door getting the most action, sometimes those wires break. For the power windows, under hood fuse box, fuse #f12 – 50 amp.

What is the fuse for the driver door?

With the driver door getting the most action, sometimes those wires break. For the power windows, under hood fuse box, fuse #f12 – 50 amp. Also the TIPM can be out which is common and easy to replace because it self initializes, here are instructions and diagrams for that as well (below).

Can a power window motor go bad on a jeep?

Had that happen with windows on my 99 laredo 4.7 QD. The main control module went bad on drivers side. Power window motor went on passenger door. Main control module was $240 list my chrysler emply. price was 170 which was still pricey. Had a buddy install them every was fine after that.

Why are my power locks not working on my Jeep?

There is a combination flasher unit under the drivers side dash, but it acts for turn signals as well hazard lights. It is an electronic controlled relay, so maybe the problem is in there. If it was wire related, the problem should be there for the hazard lights as well.

You may also have to check the wiring harness that goes into the driver door, hinge side. With the driver door getting the most action, sometimes those wires break. For the power windows, under hood fuse box, fuse #f12 – 50 amp.

What to do if front power window does not work?

The following wiring test determines whether or not voltage is continuous through the body harness to the front switch. 1. Remove the power window switch and bezel. 2. Disconnect wire connector from back of power window switch. 3. Switch ignition to the ON position. 4.

What’s the problem with my 1997 Jeep Grand Cherokee?

No one has added a helpful site for this 1997 Grand Cherokee problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: My Jeep wants to shut down when you let off the gas, hit the brakes, and make a right turn.

Why does my Jeep Grand Cherokee lock not work?

Please try again later. 2004 Jeep grand cherokee power door locks and windows stopped working. found the problem and fixed it. Also the interior lights would not turn off and the jeep did not register as an open door. the FoB lock would not work either. Loading…

2004 Jeep grand cherokee power door locks and windows stopped working. found the problem and fixed it. Also the interior lights would not turn off and the jeep did not register as an open door. the FoB lock would not work either. Loading…

This feature is not available right now. Please try again later. 2004 Jeep grand cherokee power door locks and windows stopped working. found the problem and fixed it. Also the interior lights would not turn off and the jeep did not register as an open door. the FoB lock would not work either. Loading…

How to open the back window of a Jeep Grand Cherokee?

To open the back window of a Jeep Grand Cherokee on the back door of Your Jeep, slightly above and to the right of the license plate You will see a small black rectangular button. Simply press the button up and You will hear a click that unlocks that rear window.

When do you replace the front window regulators on a Jeep Commander?

I dont remember off hand but I will post a tech note that I have about certain build dates that if one window auto reverses then you are to replace both front window regulators and now flash the door modules. Grand Cherokee and Commander vehicles that were built between 2-12-2007 and 10-3-2007.

Why does my Jeep side window not roll up?

From the inside, there is no clicking and no green arrow. NOTHING happens. Its doesn’t appear to be affecting the light itself, hazards are fine and brake and tail lights are fine. 2. After that started occurring, now the drivers side window will not roll up.

What kind of radio does a Jeep Cherokee have?

I have a 2019 Jeep Cherokee and today my radio (AM/FM) has stop working and I’m not able to use the touch screen to change my SXM channels I have to use steering wheel controls. Has anyone seen this? My radio is acting wonky as well. I have a 2016 jeep Cherokee and the phone will not connect at all.

Where to get a power window switch for a Jeep Grand Cherokee?

To correct this issue, take a journey to AutoZone where you’re going to find plenty of Grand Cherokee power window switches. If you’re missing a few tools to complete this simple installation, AutoZone offers the convenient Loan-a-Tool Program.

What to do if your Jeep Radio is not working?

Click to expand… Yessss. Call this number +1 (800) 992-1997. And ask to speak to Deedra. She’ll help you with this issue. They took very good care of me. They covered the full parts and labor cost for a brand new replacement. You have to take your car to the nearest dealer.

Is there an issue with my Jeep Grand Cherokee power window?

Jeep Grand Cherokee power window issue Fixed! – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.

Can a 2002 Jeep Grand Cherokee Laredo 2.7 start?

Hi, I have a 2002 Jeep Grand Cherokee Laredo 2.7 and experienced a battery draining problem. 3 days ago tried to start my Jeep, but no go. Battery dead.

Can you use diysave10 on a Jeep Grand Cherokee?

10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Over time, your Jeep’s power window switch begins to wear out. If you’re having intermittent problems with rolling your windows up or down, you should take care of the issue before it gets worse. A new Jeep Grand Cherokee power window switch should easily solve your problem.

What kind of car is the Jeep Grand Cherokee?

The Jeep Grand Cherokee is a mid-size luxury SUV produced by the American manufacturer Jeep. While some other SUVs were manufactured with body-on-frame construction, the Jeep Grand Cherokee has always used a unibody chassis.

The Jeep Grand Cherokee is a mid-size luxury SUV produced by the American manufacturer Jeep. While some other SUVs were manufactured with body-on-frame construction, the Jeep Grand Cherokee has always used a unibody chassis.

Why does my Jeep Grand Cherokee not have an air conditioner?

Blower Motor – If there is no air blowing from your Grand Cherokee at all, the blower motor is at fault. They are not that expensive and are easy to replace (most of the time). Blend Door – The blend door controls how much air conditioned and heated air enters the cabin.

Why does my Jeep Grand Cherokee not start?

Ask your Jeep dealer. CarComplaints.com Notes: The fourth generation Grand Cherokee took the relatively trouble-free run of the 3rd-generation and flipped the script. Read more » From 2010 to 2011, complaints about the vehicle not starting increased 10-fold.

Why is the air conditioning not working on my Jeep Grand Cherokee?

What are common reasons my Jeep Grand Cherokee has air conditioning problems? While there are a variety of reasons your Jeep Grand Cherokee air conditioning won’t work, the most common 3 are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor.

Remove two screws – one a Phillips head in the read door inside pull (armrest) and the other a Torx #15 just under the inside door release lever, Then pry the interior door panel off; release the two door latch rods, unplug the electrical wire to the window motor by first unlatching it.

When to reset the Immobilizer on a Jeep Grand Cherokee?

The system is activated when something other than an authorized key is used to try to start the engine. Most models are also equipped with an alarm system as part of the security system. If something triggers the immobilizer or the alarm system, you need to reset and rearm the system.

What does the computer do on a Jeep Grand Cherokee?

The Jeep power train control module (PCM)–or computer, as it is known in layman’s terms–controls the vehicle’s ignition, emission and fuel systems, along with other auxiliary systems necessary to the operation of the drive train.

What to do if your Jeep Grand Cherokee has electrical problems?

THE AUTO ELECTRICIAN JUST RESET THE POWER TO THE SWITCH FOR THE ELECTRIC WINDOWS. THIS HAS THEN RESET THE COMPUTER AND IT IS ALL WORKING NOW. CHECK ALL YOUR WIRES TO MAKE SURE YOU DONT HAVE A LOOSES CONNECTION. I have a 2006 Jeep Grand Cherokee that I bought from a dealer. It has about 45000 miles on it. Runs great.

Why does my Jeep Grand Cherokee not lock?

Here’s the problem: the rear liftgate door usually doesn’t respond to the lock/unlock key. I went four days straight with being unable to get the liftgate to lock, even though all the other doors work fine. I would stand by the liftgate pressing the “lock” mode on the remote key fifty times- no response.

What causes a Jeep Grand Cherokee to not start?

Jeep Grand Cherokee Won’t Start Diagnosis. 1 1. Battery Cables. While the battery cables are not necessarily the most likely issue to cause your Grand Cherokee to not start, they are some of the 2 2. Battery Charge. 3 3. Starter. 4 2. Ignition Issues. 5 3. Engine Timing.

Where is the broken wire in my Jeep Grand Cherokee?

Found the notorious broken wire in the driver door boot in my 2004 grand Cherokee. Stripped end that goes back into the cab and spliced in another 10g wire about 8” long that’s a little more flexible, pulled it though the boot, and soldered the other end to the wire on the door end.

How to troubleshoot a Jeep XJ Cherokee problem?

“If the power lock system is inoperative with either front door power lock switch, test the Passenger Door Module (PDM)…If the power lock system is inoperative with only the driver side front door power lock switch, test the Driver Door Module (DDM).” I can help you troubleshoot beyond these symptoms, too.

What are the features of a 1999 XJ Cherokee?

The XJ Cherokee in the article is our 1999 Cherokee Sport 4-door with power windows, power door locks, power mirrors and remote keyless entry (RKE). The passenger side front door module is the “brains”, containing both relays and switches. A quote from Chrysler helps:

“If the power lock system is inoperative with either front door power lock switch, test the Passenger Door Module (PDM)…If the power lock system is inoperative with only the driver side front door power lock switch, test the Driver Door Module (DDM).” I can help you troubleshoot beyond these symptoms, too.

What causes one power window to stop working?

Only one window stops working If only one window stops working, the problem could be a bad relay, fuse issue, bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced.

The XJ Cherokee in the article is our 1999 Cherokee Sport 4-door with power windows, power door locks, power mirrors and remote keyless entry (RKE). The passenger side front door module is the “brains”, containing both relays and switches. A quote from Chrysler helps:

Why is my power window still going up and down?

This means that the power window will still go up and down but the one-touch automatic function is lost. This happens because parameters stored in the window control module get lost during battery replacement. But never fear, there is a way to restore the auto window function.

What should I do if my auto window is not working?

Roll the windows up and down a couple of times using the auto function to ensure everything is working properly. Performing these steps should restore your auto window function. If it does not, there may be further problems with the system.

What kind of door Pops on a 2012 Jeep Laredo?

I own a 2012 Grand Cherokee Laredo. When I open or the driver side door the door hinge pops at about the half way point. Any suggestions how to remedy this problem without buying a new lower door hinge? Are you sure it’s not your door check? Door check/door hinge, thought they were the same. It’s the bottom one. I guess that is a door check.

What do I need to replace my Jeep Grand Cherokee door?

Dorman’s Door Panel Install Kit contains all the clips necessary for replacing those that may be lost or broken during Window Regulator or Window Lift Motor installation. Each kit contains all of… Replacement Door Molding by Mopar®.

Which is the best brand for Jeep Grand Cherokee doors?

These brands offer only high quality products which your Grand Cherokee will definitely like. Besides, doors which are stored by our company are suggested at lower price than the dealer one.

If all of the power locks and power windows are inoperative from both front doors, go to Step 3. (3) Check the fused B (+) fuse in the Power Distribution Center (PDC). If OK, go to Step 4. If not OK, repair the shorted circuit or component as required and replace the faulty fuse.

How to remove a stuck power window in a car?

Disconnect the two plastic wire switches: You can use a flat-head screwdriver to pull the connectors apart. Put the door console aside. Remove the door panel: Using your hands or a flat-head screwdriver, gently start at the front edge of panel and pry it off.

Can You unscrew a window with the screws out?

Unscrew them, making sure to hold the window as you remove the screws. The window will not fall off the mechanism with the screws out, as it’s sitting on the mechanism’s ledge, but hold the window just to be sure.

To open the back window of a Jeep Grand Cherokee on the back door of Your Jeep, slightly above and to the right of the license plate You will see a small black rectangular button. Simply press the button up and You will hear a click that unlocks that rear window.

Three possibilities: 1) Bad window motor; 2) Broken wire going to the door; 3) Bad solenoid The solenoid for the rear window is in the front door, and if you can hear it making noise in the door when you press the window up button, that’s not the problem.

Can you reset the up / down window on a jeep?

Yes, you can reset it but the problem will keep recurring unless you have the TSB performed. As 5253 pointed out, sooner or later you’ll have to have the TSB performed. On most 08’s, it’ll just be a reflash. A much higher percentage of the 06 and 07 required motor replacement as well.

I dont remember off hand but I will post a tech note that I have about certain build dates that if one window auto reverses then you are to replace both front window regulators and now flash the door modules. Grand Cherokee and Commander vehicles that were built between 2-12-2007 and 10-3-2007.

From the inside, there is no clicking and no green arrow. NOTHING happens. Its doesn’t appear to be affecting the light itself, hazards are fine and brake and tail lights are fine. 2. After that started occurring, now the drivers side window will not roll up.

After some searching on the internet i found out that this problem happened already with quite some other WJ’s. Most of the time the black ground wire in the rubber boot between the door and the body breaks. Sometimes the orange wire breaks.

Why are power windows, locks and mirrors not working?

The power windows, locks and mirrors are not working on my vehicle. I cannot find any fuse, breaker or relay that is labeled in the interior fuse box or power distribution center in the engine compartment for these circuits. Can you give their location and name? have the same problem?

When does the Jeep Grand Cherokee shut down?

The car just shuts down when going down the road,we have almost been in two accidents on the highway when the Jeep just shut down at speed and now the car wont even start,dearlership was of no help. Engine shutdown while driving. Has shut down multiple times while moving down the road.

Are there any problems with the Jeep Grand Cherokee?

Jeep Grand Cherokee owners have reported 174 problems related to engine shut off without warning (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Jeep Grand Cherokee based on all problems reported for the Grand Cherokee.

Where can I get a Jeep Grand Cherokee repaired?

The vehicle was towed to the river oaks Chrysler Jeep Dodge ram dealer, located 4807 kirby dr, houston, TX 77098 where it was stated that there was no recall. The manufacturer was made aware of the failure and referred the contact to the NHTSA. The vehicle was not repaired. The failure mileage was approximately 100,000. Fe.

What to do if your Jeep Grand Cherokee won’t start?

No answer in particular , just an FYI as sometimes if turning the key doesn’t work, I put it in Neutral and start this way. Works for me 2 people found this helpful.

Why are my Jeep Grand Cherokee windows not working?

My 2004Jeep Grand Cherokee driver door locks and all windows stopped working. I found the black 10/12 gage wire and a yellow 18 gage wire broken in two within the driver side black boot covering the harness into the car body. I stripped and butt spliced both wires.

95 Grand Cherokee Laredo 5.2 had no windows working, looked at drivers door and spliced split black wire together and the 2 drivers windows work! The passengers will not move from either control? Check all fuses. Do you think it’s the switches on just the right side? Or maybe a fuse in the engine box? 24 people found this helpful.

Why is my Jeep Grand Cherokee door lock not working?

I pushed the black boot between the door jam back and found the power wire broke (orange w/black tracer)fixed it but it st up lol is not working. I did the battery thing for 30 min also. Still nothing. I’m losing my mind here. 18 people found this helpful. My 2004Jeep Grand Cherokee driver door locks and all windows stopped working.

Are there any problems with my 2008 Jeep Grand Cherokee?

Have a 2008 grand Cherokee the front windows and door locks stop working the tailgate won’t open and my gauges on the dash stop working. But my back windows work fine the truck runs fine what could be the problem ?

What should I do if my power window won’t work?

Car repair experts recommend starting at the fuse box and checking voltage on the wiring at various points between the fuse box and power window, though this process can be tedious, and is often delegated to qualified repair shops. By far the most common power window mechanism, the regulator is also a very common point of failure in faulty windows.

Where can I buy a 1999 Jeep Grand Cherokee?

– Buy, Sell & Save with Canada’s #1 Local Classifieds. This 1999 Grand Cherokee is missing a battery and doesn’t run due to a unknown issue with the fuel pump possibly but once up and running, makes a great little vehicle. Located in Copperfield, SE.

Are there any problems with my 1999 Jeep Grand Cherokee?

*** TRICK FOR YOUR electrical problems and cooling system. I purchased my 1999 Jeep in 2013 it has only caused me two decent problems.

What are the problems with a 1998 Jeep Grand Cherokee?

Worst 1998 Jeep Grand Cherokee Problems #1: Engine Stalls/Shuts Down While Driving 1998 Grand Cherokee Average Cost to Fix: $2,000 #2: Death Wobble 1998 Grand Cherokee Average Cost to Fix: $400 #3: Engine Hesitation In Acceleration 1998 Grand Cherokee Average Cost to Fix: $800

How to fix Jeep Cherokee driver power windows?

ALSO: If your windows are “slowing down” or “working “Sometimes”” it is mostly going to be the motor and regulator IN THAT troublesome door. This fix is for when all of the windows are functioning properly BUT ONLY from the driver pannel. PS. This IS reversable and to be clear, the “ALL WINDOW LOCK-OUT” is basically being by-passed.

Why is my power window switch not working?

The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced. Once the mechanics replace the switch, they will test the windows to make sure the rest of the system is working properly. 3. Window works from master switch only

When do you need to replace power window switch?

If the windows are not working properly, not working at all, or only work from the master switch, you may need to replace the power window switch. 1. All the windows quit working 2. Only one window stops working

Is the All window lock out pannel reversable?

This IS reversable and to be clear, the “ALL WINDOW LOCK-OUT” is basically being by-passed. If you do this fix, then later purchase an all new driver side door control pannel, you will NOT HAVE the “ALL WINDOW LOCK-OUT” feature, even on the new one.

This IS reversable and to be clear, the “ALL WINDOW LOCK-OUT” is basically being by-passed. If you do this fix, then later purchase an all new driver side door control pannel, you will NOT HAVE the “ALL WINDOW LOCK-OUT” feature, even on the new one.

Have a 2008 grand Cherokee the front windows and door locks stop working the tailgate won’t open and my gauges on the dash stop working. But my back windows work fine the truck runs fine what could be the problem ?

Why does my Jeep Grand Cherokee battery keep going out?

Also the inside light wouldn’t go out and killed the battery. It was the broken wire in the boot between the drivers door and the body. It is a comon problem with Jeeps. I heard one dealer wanted $1000 to fix the problem.

Why does my Jeep gauges go crazy with the key off?

JUST NOTICED THAT WITH KEY OFF IF YOU HIT THE WINDSHIELD WIPERS THAT GAUGES WILL MOVE. JEEP DEALERSHIP CAN’T FIGURE IT OUT AND NEITHER CAN MY MECHANIC. MECHANIC THINKS ITS A ELECTRIC PROBLEM? WHAT ABOUT IGNITION? OBVIOUSLY THERE MUST BE SOME JUICE GETTING TO GAUGES WITH KEY OFF. ALSO, JEEP IS IN WON’T START MODE NOW.

Why does my 2002 Jeep Grand Cherokee not start?

SOMETIMES VEHICLE (2002 JEEP GRAND CHEROKEE) WON’T START. YOU GET NOTHING WHEN YOU HIT THE KEY, NO CLICKING, NO NOTHING. YOU MAY GO BACK LATER AND IT WILL START. GAUGES GO CRAZY. WILL COME ON. ODOMETER AND CLOCK WILL FLASH. SOMETIMES SPEEDOMETER WILL GO FROM 60 TO ZERO AND BACK. WILL NOT LOSE POWER THOUGH.

How much does it cost to replace window regulator on Jeep Grand Cherokee?

The power window motor commonly fails in the front and rear doors. This may require replacement of the complete window regulator assembly which will include the window motor. The average cost for a Jeep Grand Cherokee Window Regulator Motor Replacement is between $313 -$335. Learn More

Is there a door lock on a Jeep Grand Cherokee?

99-04 Jeep Grand Cherokee Door locks-Door Switch-electric windows not working. – YouTube 99-04 Jeep Grand Cherokee Door locks-Door Switch-electric windows not working. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

Why is there no switch on my Jeep Cherokee?

1. The part breaks and they take it in to get it fixed. 2. The part breaks and they they to fix it themselves (which usually works). 3. The part breaks and they simply don’t fix it. One thing about us Cherokee owners is that we tend to either be frugal, or we refuse to replace the Jeep because we love the darn thing too much!

Why is my window master switch not working on my Jeep?

I scoured the XJ forums and discovered that the culprit was either the window motor, or the lock out switch on the driver’s side was faulty cutting off the juice that makes it over to the passenger window. Naturally I tried the cheapest fix, which was the passenger window regulator/motor which only cost me $25, brand new on eBay.

How to fix auto up window on Jeep?

Drive the glass to the full-down position by pushing down on (depress) the window switch until the window glass is fully open. Do not release the window switch. Continue to hold the window switch down for 30 seconds after the window glass is fully open. Confirm that the express-up module has been de-normalized by attempting an express-up cycle.

What to do when auto up window does not work?

Do not release the window switch. Continue to hold the window switch down for 30 seconds after the window glass is fully open. Confirm that the express-up module has been de-normalized by attempting an express-up cycle. The window should not operate in express mode. It should stop moving when you release the window swith.

Is there a problem with the ignition on a Jeep Cherokee?

If there is one common denominator amongst practically all 1984 to 1996 Jeep Cherokees (XJ , ZJ, WJ and WK’s alike) it is a bad ignition. Though typically robust, most Jeep Cherokees will eventually experience ignition failure, leaving otherwise happy owners stranded.

What to do if your Jeep Cherokee wont start?

Many have found that in the beginning stages of failure, it is possible to reset the switch to get home. If your Jeep fails to start, try placing it in neutral, and then starting it. This works in 80 percent of all failures, and will continue to do so for some time before a more permanent fix becomes mandatory.

Only one window stops working If only one window stops working, the problem could be a bad relay, fuse issue, bad motor, or the power window switch has failed. The most common reason for one window to stop working is the switch, so this should be looked at by a professional mechanic to have your power window switch replaced.

What are the symptoms of a bad power window switch?

If you suspect your power window switch is going bad or failing, watch for the following symptoms: 1. All the windows quit working If all of the windows quit working at once, meaning there is no response when you push the power window switch, chances are there is a loss of power in the electrical system.

Is the rear passenger window on a Jeep Grand Cherokee?

Jeep Grand Cherokee Questions – Rear passenger window does not go up, regulator/ motor works ok. – CarGurus Rear passenger window does not go up, regulator/ motor works ok. Hello! master but it does not go up from neither. Opened the door panel to at least close the window. It is not the window regulator nor the motor, tested with a

Why does my rear passenger window not go up?

Opened the door panel to at least close the window. It is not the window regulator nor the motor, tested with a power probe and works fine, also works manually, but not from the switches. The other 3 windows work perfectly. Thought it could be the switch, but it’s not working from the main master switch neither.

What to do if your Jeep doesn’t start?

Check for battery power on two terminals in the relay socket with the key in the start position. If you don’t see battery power, check fuses 6 30A and 26 15A in the PDC. If you see battery voltage, check for ground on pin 85 in the relay socket.

What to do if your Jeep PCM is not working?

As an experienced Electronics Engineer, I have gone the extra step and added the use of a deoxidizer on the connectors, which will protect the connections as well as increase their electrical integrity. I have personally used this cure myself on several Jeeps having been a longtime Jeeper with myfirst being a 76 Cherokee S.

Are there any problems with the power windows?

Lateron i found out that also all power windows don´t work, no power mirrors and that also the drivers side door doesn´t lock/unlock when remote or passenger side switch are used. Also the memory seat function is inop.

Why does my Jeep have intermittent electrical problems?

Intermittent electrical problems are most of the time related to bad contacts/broken wire/ground problems. There is a combination flasher unit under the drivers side dash, but it acts for turn signals as well hazard lights. It is an electronic controlled relay, so maybe the problem is in there.

Lateron i found out that also all power windows don´t work, no power mirrors and that also the drivers side door doesn´t lock/unlock when remote or passenger side switch are used. Also the memory seat function is inop.

What to do if your power window is not working?

Each car door with a power window has a window regulator to move it. If the regulator goes bad, then pushing the up or down button will not make the window move. You will need to have the window regulator replaced. Every power window requires a window motor to supply the electrical energy.

Why is my crank window not working in my car?

This would never happen with a crank window system because it uses manual human power to open and close it. But still, it is not that big a deal because it will not impair your driving abilities.

Do you need a crank handle to open a power window?

It is very convenient to operate a power window because you just need to push a button on your door to open and close it. You don’t need to go through the hassle of rotating a crank handle with your hand.

What are the pins on a 1993 Jeep Grand Cherokee?

1993, 1994, 1995 4.0L Grand Cherokee 60 Pin Connector Pin Wire Color Description 1 RED/WHT MAP Sensor Signal 2 TAN/BLK ECT Sensor 3 PNK/BLK RED Battery Power ( 1993 Only) Battery Power 4 BLK/LT BLU Sensor Ground

How many pins does a Jeep Grand Cherokee PCM have?

The PCM has a 60 pin connector and on the back side of the connector (wire side) are embossed a few numbers to further aid you in correctly identifying the pins (circuits). IMPORTANT: The illustration above and pin-out table below apply only to: 1993, 1994, 1995 Jeep Grand Cherokee with 4.0L engine.

99-04 Jeep Grand Cherokee Door locks-Door Switch-electric windows not working. – YouTube 99-04 Jeep Grand Cherokee Door locks-Door Switch-electric windows not working. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

If you suspect your power window switch is going bad or failing, watch for the following symptoms: 1. All the windows quit working If all of the windows quit working at once, meaning there is no response when you push the power window switch, chances are there is a loss of power in the electrical system.

How to roll the windows down on a jeep?

To use this feature, press and release the UNLOCK button on the RKE transmitter and then immediately press and hold the UNLOCK button until the windows lower to the level desired or until they lower completely. Click to expand… Is there a setting to make this work? It doesn’t seem to be working with my 2012 Summit.

Where are the power window switches located on a car?

The switches are located near each window, with a master panel on or near the driver’s door. Over time, the fuse, motor, or regulator can go bad and need to be replaced.

The broken wire will be under that rubber hose-like thing you see running between the inside edge of the door and the door jamb. Pry that back and look inside it – one of the wires will be broken and require repair by stripping insulation off, twisting the wires together, soldering them and wrapping securely with electrical tape.

Why is my front power seat not working on my Jeep Grand Cherokee?

The contact stated stated that while driving at different speeds, the front drivers power seat bracket broke causing the seat to wiggle. The vehicle was taken to a private mechanic who diagnosed that the seat needed to be replaced. The manufacturer was not made aware of the failure. The vehicle was not repaired.

Can a Jeep Grand Cherokee open from the outside?

Discussion in ‘ Cherokee ‘ started by Hamey, Feb 16, 2018 . I have a 1999 jeep grand cherokee and for some reason the driver side door does not open from the outside if you use the the unlock button on the inside and quickly open it the door will open same with key what is the problem you have to do this everytime to open it on just this door

Why is the side door on my Jeep not opening?

Inside you should be able to inspect the door latch mechanism whether the unlock button or exterior door release is triggered. Perhaps the actuators can no longer fully engage the latch mechanism or a lever or rod is worn, bent or debris might be found that’s preventing full movement. OFFGRID, JKBob 25, Bob and 1 other person like this.

Why is the passenger door not working in my Jeep?

There are multiple short-range antennas in your GC, including one around the perimeter of the spare tire well (for tailgate operation). The fob will start operating randomly as the battery gets weak and then eventually not at all, requiring you to use the fob manual key to unlock the door.

What should I do about my 2012 Jeep Grand Cherokee?

Plastic control arm on damper needs to be replaced. Common problem. My 2012 Grand Cherokee did the same thing. Passenger side blend door gear broke; it’s cheap plastic gear. $2 part. Can be done yourself, there’s a how to somewhere on this forum.

The power windows, locks and mirrors are not working on my vehicle. I cannot find any fuse, breaker or relay that is labeled in the interior fuse box or power distribution center in the engine compartment for these circuits. Can you give their location and name? have the same problem?

Why does power window not work on drivers door?

If window is all the way up or down the motor will grunt and the inner door panel will flex when actuated in that one direction. (6) Reverse jumper probes at the motor connector terminals and window should now move in opposite direction. If window does not move or grunt, replace the motor.

Why is the key not detected on my Jeep?

The key was not detected. I opened the door and pushed the button and Jeep started. Closed the door and message said that key left the vehicle. Opened door again, put in drive, closed door and away I went. Makes no sense why the key would be detected with the door open and not closed???

How can I Fix my Jeep XJ Cherokee door?

Possible remedy: There is a slot on the rear facing edge of the door that has an adjustable slide for the door button. Work the button and watch this lever move. You can loosen the Torx screw and move the lever/button adjuster to allow for a full throw of the outside handle button when you press the button.

Possible remedy: There is a slot on the rear facing edge of the door that has an adjustable slide for the door button. Work the button and watch this lever move. You can loosen the Torx screw and move the lever/button adjuster to allow for a full throw of the outside handle button when you press the button.

How to troubleshoot a Jeep no start condition?

No Start Condition Basics. NO START 1: Checking For Spark. NO START 2: Checking For Fuel. NO START 3: Checking Engine Mechanical Condition. Cranks But Does Not Start Summary. More 4.0L Jeep Diagnostic Tutorials.

Where to find check engine light codes on Jeep?

These are listed in numerical order for easy searching. When retrieving Jeep check engine light codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located near the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.

Jeep Grand Cherokee Questions – Rear passenger window does not go up, regulator/ motor works ok. – CarGurus Rear passenger window does not go up, regulator/ motor works ok. Hello! master but it does not go up from neither. Opened the door panel to at least close the window. It is not the window regulator nor the motor, tested with a

Opened the door panel to at least close the window. It is not the window regulator nor the motor, tested with a power probe and works fine, also works manually, but not from the switches. The other 3 windows work perfectly. Thought it could be the switch, but it’s not working from the main master switch neither.

Why is the instrument cluster on my Jeep Cherokee not working?

Checked the fuses, as well as the hot to the cluster from the fuse and back to the battery. Next plan is the grounds and then the connectors. Not liking this instrument panel

Is there a problem with my 2000 Jeep Grand Cherokee?

No one has added a helpful site for this 2000 Grand Cherokee problem yet. Be the first! Read reviews of repair shops in your area. Enter your zip code: Search CarComplaints.com for these popular complaint phrases…

Why are all the lights on my Jeep Cherokee not working?

The lights work (cel, seatbelt light, air bag, etc) but the actual gauges don’t work. Any ideas of where I should check? All the grounds seem to be connected, and I haven’t made any changes with wiring in regard to the cluster.

The following wiring test determines whether or not voltage is continuous through the body harness to the front switch. 1. Remove the power window switch and bezel. 2. Disconnect wire connector from back of power window switch. 3. Switch ignition to the ON position. 4.

To correct this issue, take a journey to AutoZone where you’re going to find plenty of Grand Cherokee power window switches. If you’re missing a few tools to complete this simple installation, AutoZone offers the convenient Loan-a-Tool Program.

THE AUTO ELECTRICIAN JUST RESET THE POWER TO THE SWITCH FOR THE ELECTRIC WINDOWS. THIS HAS THEN RESET THE COMPUTER AND IT IS ALL WORKING NOW. CHECK ALL YOUR WIRES TO MAKE SURE YOU DONT HAVE A LOOSES CONNECTION. I have a 2006 Jeep Grand Cherokee that I bought from a dealer. It has about 45000 miles on it. Runs great.

Intermittent electrical problems are most of the time related to bad contacts/broken wire/ground problems. There is a combination flasher unit under the drivers side dash, but it acts for turn signals as well hazard lights. It is an electronic controlled relay, so maybe the problem is in there.

Is there a problem with my Jeep Grand Cherokee?

I changed the battery in my 2004 Grand Cherokee and to keep the clock on time and other things from happening, I connected another battery to the battery leads when I removed the dying battery. Installation seemed to go perfectly, but when I drove the vehicle two problems, that were not present before, were manifested:

Are there any electrical problems with a Jeep Grand Cherokee?

To all: Jeep Cherokees & Grand Cherokees are very prone to crappy cable grounds & such can cause all kinds of intermittent wierdness.

Most of the Jeep charging / starting issues are caused by the crappy ground points & corrosion / oxidation. A new battery might be needed but check the cables first. To all: Don’t use those crappy clamp on battery terminal clamps!

Why is the power window on my car not working?

The problem lies in the window regulator. If you’re seeing the toggling voltage, the problem is in the window regulator. It’s either a bad motor or a broken regulator that’s causing the motor to stall. Reconnect the electrical connector to the motor and try operating the window.

Where was the 2004 Jeep Grand Cherokee Laredo purchased?

Mileage: 130,446 miles Body Type: SUV Color: Silver Engine: 6 Cyl 4.0 L No accident or damage reported to CARFAX. Purchased on 04/01/03 and owned in TX until 04/21/21. Driven an estimated 10,687 miles/year. Last serviced in Dallas, TX on 03/12/21 • Vehicle serviced • Emission system checked • Emissions or safety inspection performed.

When was the Jeep Grand Cherokee Laredo last serviced?

1st owner drove an estimated 20,933 miles/year • 2nd owner drove an estimated 18,211 miles/year • 3rd owner drove an estimated 0 miles/year. Last serviced at 220,312 miles in Wilsonville, OR on 03/24/17 • Vehicle serviced • Cooling system checked. No accident or damage reported to CARFAX. Purchased on 02/12/05 and owned in PA until .

What can I do about the rear door latch on my Jeep Cherokee?

You can loosen the Torx screw and move the lever/button adjuster to allow for a full throw of the outside handle button when you press the button. This and some white lithium spray lube at pivot points of the latch mechanisms can have your “defective” rear door latches functioning as new!

Are there any problems with the Jeep Cherokee?

Our ’99 had issues with the power window/door lock system, the A/C dash panel air flow and the “No Bus” gauge drop-off problem. Each of these problems is common to the XJ Cherokees and TJ Wranglers, making forums all over the internet. On our Cherokee, I worked through the troubleshooting and solutions for each.

Why does my RKE not work on my XJ Cherokee?

The RKE also does not work (and have changed to fresh batteries). If the fix is just as you mentioned in your tutorial (i.e. changing the PDM or DDM) that would be great. Also, cheers for all the helpful tutorials you do mate, you’re a real champ!

Where are the fuse diagrams on a 2002 Jeep Grand Cherokee?

2002 Jeep Grand Cherokee Fuse Diagrams for Junction Box in cabin and Power Distribution Center under hood 10. Radiator fan relay 40A Alldatadiy.com and Eautorepair.net are professional-grade shop manuals—period. They include wiring diagrams and technical service bulletins. In most cases, their diagrams are right from the factory manuals.

When did the Jeep Liberty power windows break?

In March 2009 the LR broke. In May 2011 same. In April 2011 RF broke. In Sep 2015 LR broke once again, but this time replace with metal part. Now in Oct 2015 (as we speak) LF is out – trying to get someone out to fix it today, 9 Oct 15. Obviously had my share of PW problems; but still like the vehicle.

Is the Jeep Grand Cherokee running out of gas?

I have a 99 Jeep Grand Cherokee with about 183,000 miles. Over the last couple of days it has developed a problem where when accelerating it will lose all engine power for about 5 seconds (rpms drop and and then regain power with a short burst of acceleration). It feels like it’s running out of gas.

I have a 99 Jeep Grand Cherokee with about 183,000 miles. Over the last couple of days it has developed a problem where when accelerating it will lose all engine power for about 5 seconds (rpms drop and and then regain power with a short burst of acceleration). It feels like it’s running out of gas.

How do I Reset my Jeep Grand Cherokee?

Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed. “2011 Jeep Grand Cherokee Owner’s Manual”; Chrysler Group LLC; 2010

How do you turn off the alarm on a jeep?

Press the power door-lock switch on the keyless entry fob. Close the driver’s side door. Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed.

What kind of car has a power window that goes down by itself?

Anyone out there experienced their front power windows moving to an open position by itself after the car has been turned off, or when the open function on the key fob is activated? Only happens occasionally. Strange Car is a 2010 WK Grand Cherokee Laredo, 3.7L QT1. Now has about 6500 miles on it. Thanks in advance for any input or advice.

When do I go up, my Ford Ranger loses power?

Ford mec … read more 96 Windstar, while driving at regular speed, RPM’s go down, no change with pedal movement (Boggs). Stop put in park. Push pedal and engine revs up and then goes down holding pedal in same position. So … read more 1994 Ford Ranger: 4 cyl. Runs great in 1st, 2nd, 3rd gear..loses 1994 Ford Ranger. 4 Cyl.

Why does my 1999 GTP engine keep sputtering?

My 1999 GTP experienced the sputtering problem at 28,000 miles and it was the result of a defective wiring harness. I assume this to be very unusual but it can be the cause. Best of luck. 30 people found this helpful.

What should I do if my window motor is not working?

Remove Plastic Door Cover. Step 3 – Locate the window mounting bolts, the window may need to be raised or lowered to access these bolts. If the window motor is non operational grasp the window to force up or down to gain access, or use a small wrench or socket to remove inside the door frame.

How to fix a Ford power window regulator switch?

How to take apart and clean a Ford power window regulator switch. The metal electrical contacts corrode with time and the windows no longer move up or down. Try this procedure before going to the trouble of replacing the motor. This type of switch was used on many Ford and Mercury vehicles from 1988 – 2003 . Loading…

Where can I get my power window regulator repaired?

Trust our expert technicians at Safelite AutoGlass® to get your power window motor back in working order. Our trained technicians at Safelite will ensure that you receive the best parts and service for your power window regulator.

How long does it take to repair a power window?

Experienced technicians can complete most power window repairs in one hour or less. However, if a more complicated issue arises or multiple parts of a power window need to be replaced, the service can run longer. How much does it cost to fix a power window?

What should I do if my power window stops working?

If your power window has stopped working, you need more than a quick fix. Side windows are one of the most active parts of your vehicle and can wear down fast if you fix them yourself or use the wrong parts. You and your vehicle deserve only high-quality power window repair services.

How can I Fix my Electric window motor?

Check the electrical input on the power and ground wires, which are generally the two largest wires connected to the window motor. Attach the multimeter to the wires, then activate the window switch with the car’s key in the on position.

When you have a power window not working condition, most DIYers automatically suspect a bad power window motor. That’s usually not the case. If you have a power window not working issue, the fault is usually a broken window regulator, bad window switch, or a problem in the power window wiring. Passenger window not working

This would never happen with a crank window system because it uses manual human power to open and close it. But still, it is not that big a deal because it will not impair your driving abilities.