Why are all the gauges on my GM Truck not working?

Last night I was comin home from the store and realized my speedometer wasn’t working (ins’t the first time) so i hit the dash, then realized NONE of the gauges were working.. Gas gauge, almost empty. Water temp, cold. No oil pressure. The alt wasn’t charging. No tac and no speedometer.

Are there Trans temp gauges on GM trucks?

If you were to get a Escalade Dash Cluster,which has the Transmission Temp gauge.The only item that needs to be done, is to have the Mileage programmed into the Escalade Cluster……the 99′ and up NBS Siverado’s/Sierra’s Were-n-Are Already Pre-Wired from the Factory for the Trans Temp Gauge.

What should I do if my gauges quit working?

The alt wasn’t charging. No tac and no speedometer. The Lights work fine, The odometer is still rollin over, cruise control works, Gear selection indicator read out works fine.. Any ideas? I haven’t dug too far yet, I didn’t have time today (monday) but I have Tuesday off so i was gonna start snooping around.

What causes a bad gauge cluster in a Chevy Silverado?

Individual gauge problems are almost universally caused by failing gauge motors. Each gauge is controlled by one gauge motor called a stepper motor. For example, an instrument cluster with 6 analog gauges will have 6 stepper motors.

What are the symptoms of a bad transmission speed sensor?

Symptoms of a Bad or Failing Transmission Speed Sensor. 1 1. Harsh or Improper Shifting. Without a valid speed signal from these sensors, the PCM will not be able to correctly control the shifting of gears 2 2. Cruise Control Does Not Work. 3 3. Check Engine Light Comes On.

What should I do if my gas gauge stops working?

Gas gauge, almost empty. Water temp, cold. No oil pressure. The alt wasn’t charging. No tac and no speedometer. The Lights work fine, The odometer is still rollin over, cruise control works, Gear selection indicator read out works fine.. Any ideas?

What are the warning lights on my dashboard?

So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one.

Why does my Chev Silverado have no tach?

2003 Chev Silverado. All instrument cluster gauges quit today. No speedo, tach, fuel ,temp, oil etc. Never any problem 2003 chevy: All instrument cluster gauges quit today..speedo..tach… My oil pressure, fuel, coolant temp, and battery voltage gauge don’t work. My Speedo and tach work fine. I also have a battery and abs light on.

Why did my instrument cluster quit working on my 2003 Silverado?

I have a 2003 GMC Serria 1500HD 4WD that the gauges quit working today from the Tach, gas, oil, temp and etc. How can this be fixed? Thanks … read more MY 2003 Silverado XT instrument gauges didn’t work anymore after getting gas. I’ve checked fuses. Everything else seems to be working fine. … read more

When does the car temperature gauge go up?

Your car temperature gauge goes up from 100 to 200 degrees F in 3 to 5 minutes after your car engine starts running, that is normal, because your car thermostat is close.

What should the temp be on my GMC Truck?

After getting it back from having leaking intake gasket replaced, the temp would go up to 260 before it went back to 170 and then would sit for a little bit, go back to 210, back to 170, back to 245 or so, then back to 170, but It never seemed to run hot. I changed the thermostat with a brand new 190* from NAPA and it seemed to cure a little of it.

Is there a problem with my GMC guage?

That took care of my security issue I had a few weeks back. This almost sounds like the problem that im having, Did you figure it out?

What causes a fuel gauge to read full?

Fuel gauge stuck on full Another, less common, symptom of an issue with the fuel gauge sender is a fuel gauge that is stuck on full. A faulty fuel gauge resistor can send a bad signal to the instrument cluster which can cause the gauge to permanently read full.

What causes the cluster gauges to stop working?

In one of the youtube videos I watched, the guy mentioned that there are also three small surface mount resistors that control power to the entire cluster, and his were causing the entire gauge cluster to go dead. He reflowed them and corrected the issue. I had a issue pretty similar to this as well.

What’s the problem with my GMC Sierra 1500?

Problem all gauges do not work all went out together. All other electrical work 2004 GMC Sierra 1500: Problem all gauges do not work all went… We have a 2004 GMC Sierra 1500 and on the instrument panel nothing works. No RPM, battery, fuel, nothing. Runs fine, took it to Autozone and they … read more ASE Certified Master Techn…

What does it mean when your speedometer is not working?

If the oil pressure, coolant, charge, or gas gauge doesn’t work or works erratically, the problem is in the gauge, wiring, or sender. Speedometers are unique in that some of them use physical cables instead of sensors, so a speedometer not working can also indicate a broken cable or stripped gear.

What to do if your fuel gauge is full?

If you DO have 12 volts to the fuel gauge, the next step is to remove the fuel sending unit wire, and, with the ignition key “on”, ground the sender wire to a good chassis ground. The fuel gauge should immediately go to empty. Removing the sending unit wire from the chassis ground the fuel gauge should go directly to “full”.

What to do if your coolant gauge is not working?

Using your coolant temperature gauge as an example, the diagnostic procedure involves locating and disconnecting the sending unit. With the ignition on, the gauge should register cold. If you connect the sending unit wire to ground, the gauge should switch to read hot.

Are there any power gauges on my Yukon XL?

My 2003 Yukon XL (Suburban) with 5.3 motor and 70k miles has no power to any of dash gauges. The truck runs and operates fine, but the radio, heater controls and dash lights work fine. No gauge activity at all. All gauges are at the zero mark. I believe I have checked all fuses at left hand corner of dash, under dash and the under hood fuse box.

Why is my Cluster gauge on my Tahoe Yukon not working?

After a little research it turned out to be a common problem where the seven little surface mount resitors that power the display overheat and break the solder connections. It was simple to reflow the solder with a little flux and a drop of fresh solder.

Are there any problems with the GMC Yukon Denali?

Issues now the dealer has not been able to rectify after numerous trips to them. Traction Active engages randomly even though unit is not slipping causing no power and just revs, not good when taking a left at a light! Have to take foot off of gas.

What does Danger Danger mean on a GMC Sierra Denali?

GMC Sierra/Sierra Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-1500-11698638) – 2019 – CRC – 3/5/19 Introduction 3 {Danger Danger indicates a hazard with a high level of risk which will result in serious injury or death.

What is the owner’s manual for a GMC Sierra Denali?

GMC Sierra/Sierra Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-11349177) – 2018 – CRC – 10/17/17 6 In Brief Instrument Panel Uplevel Shown, Base Similar GMC Sierra/Sierra Denali Owner Manual (GMNA-Localizing-U.S./Canada/ Mexico-11349177) – 2018 – CRC – 10/17/17 In Brief 7 1. Instrument Panel Illumination Control0182. 2.

What to do if your GMC Sierra Voltage Gauge does not work?

GM has had a issue with the clusters in the 2003-2005 trucks. The cluster will be replaced for free for your truck if it has less then 70k miles. I would take it to your local dealer and tell them that the voltage gauge sticks at times. They should order one for you, takes 1-2 days and replace it for you at no charge.

Why is my Chevy 2500HD oil gauge not working?

04 2500 HD DURAMAX DASH PROBLEMS. Tach works for awhile then stops altogether, will work when I drive the next time. Know my oil gauge is acting up. Checked with GM dealer, they informed me that the warranty on the dash ran out at 70,000mi. (85000) when my problems started. Whole panel has to be replaced. 04 2500 HD DURAMAX DASH PROBLEMS.

What’s the problem with my GMC Sierra truck?

I have A 2004 GMC Sierra 1500 truck. Problem all gauges do not work all went out together. All other electrical work I have A 2004 GMC Sierra 1500 truck. Problem all gauges do not work all went out together. All other electrical work – Answered by a verified GM Mechanic We use cookies to give you the best possible experience on our website.

What to do if your speedometer stops working?

My speedometer hasn’t worked for probably 2 years. The dealer wanted over $500 to fix. I found the stepper motors on e-bay and purchased replacement lights as well. It takes a good soldering iron and a solder sucker tool you can buy at Radio Shack.

What to do if your truck gauges are inoperative?

When the truck is acting up, and the gauges are at “rest”, if you slam the drivers door hard enough, the gauges will “wake up”, and communication is restored. Any ideas? Oh, I also have these two plugs behind the underhood fuse box… anyone know what they’re for?

How much does GMC Sierra 2500 HD general diagnosis cost?

The average cost for a GMC Sierra 2500 HD General Diagnosis is between $88 -$111. Learn More I bought this truck used a couple of years ago and 3 or 4 times all of the gauges and the tach and speedometer have died for a few days. So far they have started working again before I have figured out what the problem was.

Is the oil gauge on my GMC truck working?

GMC wouldn’t replace it, neither would the dealer we bought it from. Now 16 months after we purchased the truck the oil gauge is reading off, the battery gauge is reading off, the speedometer has stopped working right in the past week and I’m not sure about my gas gauge but suspect it’s off also.

Why is it when driving the RPM gauge drops or jumps up?

Somewhere the fuel drop then suddenly rpm decrease better check the complete fuel system from tank to injectors also check the rpm sensor . Was this answer helpful? This could possibly be your output speed sensor, related to the transmission.

Is the temp gauge on my Car working?

As stated in the thread title, my dash backlighting, speedo, tacho, and temp gauge are not working. However all of the warning lights and high beam indicator light work. The problem has me stumped, I have searched and searched here but haven’t found an answer yet.

Is the Tacho, Speedo, and temp gauge working?

Still no tacho, temp gauge or back lighting though. 1) joining pink wire to black wire gives no result/no dash lights. On a side note, joining black to blue/black makes sparks ha ha! 2) alternator warning light (I assume this is the one that looks like a battery) and the oil pressure warning light are functioning.

What to do if your gauges are not working?

Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. Anything and Everything… Beautiful today in Canyon Lake. Time for a little boat ride. An error occurred while retrieving sharing information.

Why are my dash lights not coming on?

1. The dash light dimmer switch works on the earth side of the dash lights. Having power in two wires indicates the dimmer switch might be faulty. Try joining the Pink wire to the Black wire. If the switch is faulty the dash lights should come on at full brightness.

How much fuel does a GL1500 Goldwing use?

Fuel works out at 40mpg on average and it uses a little oil on long 1000 mile plus trips. Phenomenal accessories as standard plus unlimited amounts of extras available online. What a bike been all over Europe on it. Never let me down. Smooth.

How to troubleshoot a temperature gauge in a car?

Temperature gauge troubleshooting begins with isolating the problem either to the gauge, sending unit, fuse or wiring. As with any electrical troubleshooting it is best to check all wiring connections are clean, tight and free of corrosion. The following process must be preformed with the ignition key turned to the “on” position.

Why are the gauges on my Jeep YJ not working?

It is not that uncommon for Jeep Wrangler YJ dash gauges to go out and the fix can be fairly easy…. if you can find the problem. I show the steps I went through on how to fix the gauges on my 1994 Jeep wrangler YJ. 2: Cleaning the ground wires on the engine. 3: Removing the instrument cluster to check the connection of the gauges.

Why are all of my gauges not registering?

The sending unit wire could be bad or broken, or the circuit from the gauge to the sender is incomplete. Without a ground, the gauge will not register. It is highly unlikely that all the sender units are bad, so we can rule that out. Of course, it is also possible that all the gauges are malfunctioning.

Why is my speed ODM gauge not working?

The cause of problem: bad connection under fuse box going to hazard circuit. The connection plug pins had some corrosion on them. This allowed voltage to travel through that circuit but not enough current.

What happens if you have a faulty speedometer?

At worst you could find yourself driving at a speed that’s unsafe for the road conditions. There are many possible reasons behind a faulty speedometer. The most common involve the vehicle speed sensor or an electrical issue. Both problems can have impact in areas of your vehicle outside the speedometer.

What to do if your gas gauge fails to move?

If the float is OK and the float arm seems to be swinging freely through its full range, replace the tank unit. Ground the gas tank terminal post of the tank sending unit using a jumper wire. If the dash gauge now reeds empty, the gas tank unit is defective. If the dash gauge needle fails t move, the dash gauge is defective.

Why does my gas gauge read high when the tank is full?

A functioning sending unit will have a high resistance when the tank is full and a low resistance when the tank is empty. If the gauge reads higher than it should, make sure the wire attached to the electrical terminal on the tank sending unit is making a good ground connection.

Where is the gas gauge located on a Chevy truck?

The gas gauge, often located in the instrument cluster, consists of two small coils spaced 90 degrees apart with an armature and a needle placed at the intersection of the two coils. A dampener is also located on the armature to prevent excessive needle movement on rough roads.

Navigation