Which wire is positive on 12v adapter?
The solid/dashed lines on wires like the ones pictured in your question are used to indicate polarity e.g. for the “wall wart” power supplies. Usually* the wire with the white stripe or the dashed lines carries the “positive” (+) end, while the other, unmarked wire carries the “negative” (-) end.
Which is wire is the power source–yellow or red?
I have installed the z130bt in my 2005 Mercedes C230 (W203 chassis). This car has no switched 12v wire in the harness, forcing me to tap into the cigarette lighter for that switched power source. The car uses a CAN-BUS digital communication protocol, which transmits, among other things, ignition status of the car.
Where is the fuse on the Alpine Power Pack?
Look at any amp, specifically the Alpine Power Pack. It uses a 15 amp fuse to supply the power needed. That fuse is located on the 12v constant wire, and usually is taking signal from the radio speaker output wires.
Which is the Red Wire on a stereo?
The red wire is simply a turn on wire. There are many things you can look at to arrive to this conclusion; 1. The fuse on the stereo itself(normally 10a and located on the back of the radio) is for the constant source.
What kind of wiring do I need for my Garmin?
Wiring will start with your use of a Garmin motorcycle mount, which bolts to a ram mount and should have the wiring kit included with it. You have a few options on power: use the switched or unswitched ACC leads in the headlight (run a search to see pix of these) or like me, run the lead all the way back to the battery.
Look at any amp, specifically the Alpine Power Pack. It uses a 15 amp fuse to supply the power needed. That fuse is located on the 12v constant wire, and usually is taking signal from the radio speaker output wires.
What kind of wire do I need to connect my GPS to my PC?
Since the GPS needs to both send and receive information from your PC, the data connection will consist of three wires: Transmit Data (TxD), Receive Data (RxD), and Signal Ground (SG). The SG wire is common for both power and data grounding.
I have installed the z130bt in my 2005 Mercedes C230 (W203 chassis). This car has no switched 12v wire in the harness, forcing me to tap into the cigarette lighter for that switched power source. The car uses a CAN-BUS digital communication protocol, which transmits, among other things, ignition status of the car.