Where to find p0702 on Transmission Control Module?
If your car has a transmission electrical problem you can see P0700 or P0702 code. P0702 is generic fault, tells that transmission have an electrical fault. P0702 is stored in engine control module. For transmission control module fault codes contact your dealer to use proper diagnostics device as DRB III or Bosch KTS.
When to set the trouble code p0700?
The TCM monitors the sensors and actuators relating to transmission control and communicates with the Engine Control Module (ECM) to inform it of any possible issues with the automatic transmission control module. The trouble code P0700 is set whenever the TCM detects a malfunction with the transmission controls.
What does a blinking D4 transmission light mean?
keith July 6, 2016, 3:00am #2 A blinking D4 light is like a check engine light for the transmission. Regular code readers like the ones used by AutoZone will not read the transmission codes. You will need to take the vehicle to a dealer or a trusted transmission repair shop.
What does p0702 stand for in Jeep Grand Cherokee?
P0702 is generic fault, tells that transmission have an electrical fault. P0702 is stored in engine control module. For transmission control module fault codes contact your dealer to use proper diagnostics device as DRB III or Bosch KTS. You can also read/clear faults with our diagnostic software, based on ELM327 device.
What is the OBD-II scanner error code p0700?
P0700: Transmission Control System Malfunction. The OBD-II scanner error code P0700 problem is a generic code that applies to vehicles equipped with OBD-II. It refers to the transmission control module (TCM) in the automatic transmission. The P0700 code is informational. The code points to a general fault, not a direct fault.
What are the symptoms of transmission code p0702?
Symptoms of a P0702 code may include: Erratic transmission shift patterns Failure of the transmission to shift at all Decreased fuel efficiency Other transmission related codes Potential causes for this code to set are: Transmission sensor failure Open or shorted circuits in the transmission control system
What does the p0700 code in AutoZone mean?
The P0700 code is informational. The code points to a general fault, not a direct fault. To correctly identify the problem, you will need to have a scan tool that communicates with the TCM to determine the problem in the transmission. When the P0700 code is present, the malfunction indicator lamp (MIL) may be illuminated.
What to do if your p0700 is having trouble?
Monitor the Slip Speed, Lockup Duty Cycle and Output Shaft Speed for irregularities. One thing to try when fixing the P0700 code is to clear the code and take it on a road test. Before clearing out the data, record all present codes and any data from the scan tests. After the second road test, look for the codes that appear.