Where to buy a fan clutch for a Jeep Wrangler?
You can pick one up from most any auto parts store for about $5. The fan drive viscous clutch (or fan clutch for short) is a silicon fluid filled coupling with a bimetallic coil that is attached to your Jeep’s fan.
Where is the fan on a Jeep Wrangler?
4. On a 2000-Up Jeep, the radiator fan is attached to the water pump pulley by a large nut and a fan wrench will be needed to loosen it. 5. The threads on your Jeep’s radiator fan are RIGHT HAND.
How can I tell if my Jeep Cherokee fan clutch is bad?
It is a good idea to routinely inspect the fan and its clutch, as it is difficult to detect any damage to the assembly by simply looking at it. With the engine off and cold, the fan should freely rotate by hand. With the engine off and hot, the fan should exhibit some drag when turned by hand.
How do you remove a fan from a Jeep Cherokee?
Remove the fan and clutch assembly from the engine compartment. Remove the bolts and nuts that attach the fan to the clutch by turning the bolts counterclockwise with the wrench.
You can pick one up from most any auto parts store for about $5. The fan drive viscous clutch (or fan clutch for short) is a silicon fluid filled coupling with a bimetallic coil that is attached to your Jeep’s fan.
4. On a 2000-Up Jeep, the radiator fan is attached to the water pump pulley by a large nut and a fan wrench will be needed to loosen it. 5. The threads on your Jeep’s radiator fan are RIGHT HAND.
What kind of engine does a Jeep Wrangler have?
The 2.5 liter inline 4 cylinder engine was used from 1997-2002. The successor to this engine was the 2.4 liter version. This engine is one of the most popular engines that Jeep has ever put into their vehicles. The torque specs needed to rebuild this inline six if the need should arise.
What are the torque specs on a Jeep Wrangler?
Ensuring your nuts and bolts are torqued properly is key to making sure you don’t damage your TJ upon reassembling parts. We’ve compiled a list of important torque specs from Jeep’s service manuals, so the next time you’re wrenching on your rig you’ll have all the number you’ll need.
How to tighten the clutch on a Jeep Wrangler?
Use a 1/2″ socket to secure your Jeep’s fan to the new clutch and tighten the bolts to 15-18 ft. lbs. of torque. 10. Place your Jeep’s radiator fan shroud over your fan and carefully lower both into your engine compartment being careful not to make contact with the radiator.
How to remove a fan from a Jeep Wrangler?
Continue removing your Jeep’s radiator fan by rotating the nut COUNTER-CLOCKWISE (as viewed from the front of your Jeep) and then carefully pull it and the fan shroud out from your engine compartment. NOTE: Make sure to avoid any contact with your Jeep’s radiator as the fins on it can be easily damaged.
Where is the fan shroud on a Jeep Wrangler?
3. Using a 7/16″ socket, remove the 4 bolts securing your Jeep’s radiator fan shroud to the front clip. You may find it easier to access the lower bolts from underneath your Jeep. Once all the bolts have been removed, simply let your fan shroud sit on top of the radiator fan blades.
Use a 1/2″ socket to secure your Jeep’s fan to the new clutch and tighten the bolts to 15-18 ft. lbs. of torque. 10. Place your Jeep’s radiator fan shroud over your fan and carefully lower both into your engine compartment being careful not to make contact with the radiator.
Continue removing your Jeep’s radiator fan by rotating the nut COUNTER-CLOCKWISE (as viewed from the front of your Jeep) and then carefully pull it and the fan shroud out from your engine compartment. NOTE: Make sure to avoid any contact with your Jeep’s radiator as the fins on it can be easily damaged.
How to test if your fan clutch needs to be replaced?
To test whether or not your fan clutch needs to be replaced, simply spin your Jeep’s fan by hand while the engine is cold and if it spins freely 5 rotations or more, it will need to be replaced. Fortunately, this is a very easy task to do but like any job, the right tools can make all the difference.