Where is the TPMS reset button on a Nissan Altima 2010?
Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The tire pressure monitor reset button is usually located beneath the steering wheel. If you can’t find it, check your vehicle’s user’s manual.
How do you reset the tire pressure light on a 2010 Nissan Maxima?
How to reset the Nissan tire pressure light?
Repair Topics > Tires > Reset Nissan Tire Pressure… If your Nissan tire pressure light comes on or flashes, here’s the best way to refill your tires and reset the tire pressure light at the same time. Start by turning the IGN switch to the OFF position. Then turn back to ON.
How do you reset a Nissan TPMS tire?
Starting with the LF tire, use the scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). Turn ignition to the ON position with the engine OFF (not the ACC position). Connect the scan tool to the OBDII port and upload the sensor IDs. Turn the ignition to the OFF position.
Is there a way to reset the tire pressure sensor?
On the other hand, if it has an indirect system, resetting the sensor may require the use of scanning tool or a magnet. If you are not aware of the tire pressure monitoring system your car has, you can read on car maintenance tips by auto experts to identify it.
What to do if your tire pressure is too low?
If the tire pressure is less than the other tires, consider finding a gas station with an air pressure pump. Do not drive more than a mile or so depending on your tire pressure. You may need to call a tow truck if the pressure is too low. Should your vehicle be serviced by an auto body shop, they will most likely reset your TPMS light.
Repair Topics > Tires > Reset Nissan Tire Pressure… If your Nissan tire pressure light comes on or flashes, here’s the best way to refill your tires and reset the tire pressure light at the same time. Start by turning the IGN switch to the OFF position. Then turn back to ON.
Starting with the LF tire, use the scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). Turn ignition to the ON position with the engine OFF (not the ACC position). Connect the scan tool to the OBDII port and upload the sensor IDs. Turn the ignition to the OFF position.
What should I do if my tire pressure is not reset?
Some vehicles, like the Toyota Prius, for example, feature a leeway of three pounds or so for tire pressure. If the reset button doesn’t work, try inflating each tire to its proper PSI plus three, then deflate all of the tires to near zero.
What to do if your tire pressure light is not flashing?
Start by turning the IGN switch to the OFF position. Then turn back to ON. If the tire pressure warning light comes back on, but is not flashing, the system is operating normally but is sensing at least one tire that’s low on air.