Where is the brake switch on a 2011 Hyundai Sonata?
Hear this out loudPauseThe switch is commonly installed under the dashboard above the brake pedal and can be tested with a multimeter.
How do you change the brake switch on a Hyundai Sonata?
Push the switch in against the pressure of the switch plunger until there is a gap in the range of 1 to 2 mm between the end of the switch barrel and the brake stop, then rotate the switch clockwise 45 degrees to engage the barrel threads with the insert threads.
How much does it cost to replace a brake light switch?
Brake light switch replacement. The part is not very expensive ($15-$45) and can be ordered from a dealer or online. The replacement of a brake light switch in a repair shop can cost from $55 to $115 (part and labor).
Where is the brake light switch on a car?
January 30, 2017. Brake light switch is a small device attached to the brake pedal mechanism. Despite its small size, the brake light switch plays an important role in a modern car. Brake light switch is installed above the brake pedal.
What are the symptoms of a bad brake light switch?
The most common symptom of a faulty brake light switch is when brake lights don’t come on or stay on all the time. A faulty brake light switch can cause many problems. If a switch is bad, the brake lights won’t operate and the transmission shifter will not come out of “Park” position.
Push the switch in against the pressure of the switch plunger until there is a gap in the range of 1 to 2 mm between the end of the switch barrel and the brake stop, then rotate the switch clockwise 45 degrees to engage the barrel threads with the insert threads.
Why is the brake light not working on my Hyundai Sonata?
If your ABS & ESC OFF light are all the time On then most likely it is a faulty brake light switch. Sometimes you might have the ESC OFF light only. Even your cruise control may not work because of the brake light switch. Another common problem for the ESC OFF light to be on is a Not Calibrated Steering Angle Sensor.
Brake light switch replacement. The part is not very expensive ($15-$45) and can be ordered from a dealer or online. The replacement of a brake light switch in a repair shop can cost from $55 to $115 (part and labor).
How to repair a broken parking brake switch?
Repair procedures 1. Remove the crash pad lower panel. (Refer to the Body group-crash pad) 2. Remove the junction box. (Refer to the Body Electrical System group – Fuses and Relays) 3. Disconnect the parking brake switch connector (A). 4. Remove the parking brake pedal mounting bolts (A) and nut. (B) 5.