Where is the AC evaporator on a Kia Sportage?
It is located to the left of the steering wheel below the dash vent. It must be pried out with a pry tool. Using an angled pick or small plastic pry bar, pull on the edges of the upper dash panel until the push pin pressure releases tension on the dash panel. Disconnect the electric connectors behind the panel.
Is there a problem with the EVAP temperature sensor?
Noted below are a few of the common warning signs that a problem with the EVAP temperature sensor exists. No cold air from the AC system: Usually when a vehicle has a coolant leak on a closed loop system or is running low on refrigerant, the air conditioning system slowly stops blowing cold air into the vehicle.
How does an evaporator temperature sensor work on a car?
This location makes it very time consuming for a mechanic to reach as it will require the removal of most of the dashboard. If the sensor detects that the temperature is approaching high temperatures, the AC system increases flow through the system to increase cooling.
When to replace an evaporator temperature sensor ( switch )?
If this occurs, you’ll have to replace the sensor. The AC compressor does not work: Another error code that commonly can be mistaken for an AC compressor failure is P-0533, which indicates that the circuit to the AC compressor is too high.
It is located to the left of the steering wheel below the dash vent. It must be pried out with a pry tool. Using an angled pick or small plastic pry bar, pull on the edges of the upper dash panel until the push pin pressure releases tension on the dash panel. Disconnect the electric connectors behind the panel.
How to remove an evaporator temperature sensor ( switch )?
Most sensors are screwed into the AC condenser and held onto the sensor by a secondary clip. To remove the sensor, you’ll need to remove the support clip first. After the clip has been removed, you can unscrew the sensor by pressing down and turning the switch to the left. Step 7: Remove electrical harness from the old EVAP temperature sensor.
Why does the evaporator sensor on a 2006 Dodge Ram freeze up?
2006 Ram Evaporator Temp. Sensor Does anyone know why Dodge has two different locations for the evaporator temperature sensor on the 2006 diesels? I am experiencing what I believe is an evaporator freezing up after about 30 minutes of running my a/c. At that time, the air coming out of the vents decreases considerably, although it is still cold.
Noted below are a few of the common warning signs that a problem with the EVAP temperature sensor exists. No cold air from the AC system: Usually when a vehicle has a coolant leak on a closed loop system or is running low on refrigerant, the air conditioning system slowly stops blowing cold air into the vehicle.