Where does the oil go after leaving the oil cooler?
After leaving the front cover outlet passage, the second oil path sends the oil through the oil cooler and filter assembly. Once inside the filter housing, the oil filter bypass valve may open to vent excess pressure and oil back into the oil pan.
What is the oil flow diagram for a 1999 Harley?
Harley evo oil flow diagram. 1999 harley evo oil lines diagram. I am using a softail horseshoe tank and running a 93 evo motor. After starting the engine look into the tank to verify oil movement. Oil tank to pump. Wait until you see a steady flow of oil the attach.
How big is the oil line on a 1988 HD Softail?
Hello i need a diagram of oil lines on a 1988 hd softail custom ive look at. Can anyone verify this is the correct oil line diagram. 1021 x 1500 pixel image type. Oil tank to pump. Filter to tank via return line to pump back to tank. After installation and filling oil tank remove the feed line to the oil pump and purge all air.
Where does the oil go during cold start?
During cold start the oil feeds in two directions from the anti-drainback check ball. One feed leaves the check ball and enters the front cover. From there it enters the high-pressure oil reservoir.
When to check the oil cooler flow direction?
If you’re sure to have proper Oil Pressure & have topped off oil level to compensate for the added volumn of the cooler… take it for about a 10 mile ride, then recheck the cooler for temperature. I didn’t realize the oil and engine temps could be that far apart. The 10 mile ride sounds sounds like the good way to check it out for certain.
How is an oil cooler bypass valve installed?
The small hole is used for oil temperature bulb connection, and a Thermostatic Oil Cooler Bypass Valve is installed in the large hole. Even more attention to detail may be required when an oil filter is installed. The pressure screen housing must be removed and oil-filter adapter installed in its place.
Do you need an oil cooler for a Lycoming engine?
Individuals who acquire these engines for use in their home-built aircraft may need an oil cooler to keep temperatures within operating limits. This can be accomplished by utilizing an adapter—Lycoming part number 62418. Utilization of this adapter will allow the engine to be used and the oil to be cooled, but there are limitations.
Harley evo oil flow diagram. 1999 harley evo oil lines diagram. I am using a softail horseshoe tank and running a 93 evo motor. After starting the engine look into the tank to verify oil movement. Oil tank to pump. Wait until you see a steady flow of oil the attach.