Where do you find the gear ratio on a VIN number?
When you find this 9 digit number you have to read the numbers from the fourth digit to the eight digit. The digits between these numbers represent the gear ratio. If you do not find the numbers are appropriate for the gear ratio of your car then this is down to the fact not all VIN numbers display the gear ratio in their code.
What’s the gear ratio on a Ford truck?
If you divide the number of teeth on the ring by the number of teeth on the pinion, 36/12, it yields the gear ratio of 3.00:1…..meaning the driveshaft will spin 3 times for every complete tire rotation. Division is the only way to figure it.
What is the VIN number on a Chevy Caprice?
This position provides the information on the engine of the Chevy. 2 – 6.0L V8 (L77) (GAS/Ethanol) Chevrolet Caprice Police Vehicle (AUS) The check number is used to algorithmically validate the Chevrolet VIN. The tenth position of the VIN is used to identify the year of production of your car model.
Where can I find the VIN number for my Ford truck?
Check out the NHTSA VIN DECODER webpage. You’ll be able to enter your VIN number and have it automatically decoded.
Where do I find the gear ratio on my car?
How to Find Out the Gear Ratio With the VIN Number. It can be found on the sticker on the inside of the driver’s side door or on a stamped metal plate embedded in the dashboard above the steering wheel. It also is on your vehicle’s title. Identify the VDS section, the fourth through eighth digits of the VIN.
How to determine gear ratio from Chevy Vin decoder?
I have the following information from the Chevrolet VIN Decoder. I’m trying to figure out which number determines my gear ratio. I’m assuming it is 3.42, or does the min or max number represent the ratio?
How is the Vehicle Identification Number ( VIN ) used?
The vehicle identification number (VIN) is a 17-digit code that is used to identify and track every automobile produced. Each number and letter contained within a VIN reveals information about the vehicle, such as the make, model, production year and engine size.
Check out the NHTSA VIN DECODER webpage. You’ll be able to enter your VIN number and have it automatically decoded.
How can I find out axle ratio of my Chevy truck?
Refer to the additional resources link to find the year of your Chevy truck and upload a file to help you decipher the code of your VIN. Contact the dealer or the manufacturer (you could get a customer service number from the owners manual of the truck) and give them the VIN number and tell them you wish to know the axle ratio.
How is axle ratio related to transmission ratio?
Your axle ratio, transmission ratios, and even tire diameter all factor in, so be sure to look at the big picture. The axle ratio is derived from dividing the number of teeth on the ring gear by the number of teeth on the pinion gear. For a 3.73 ratio, there may be 41 teeth on the ring gear and 11 on the pinion for 3.72.
Where do I find the VIN number on my car?
First you must find your Vehicle Identity Number or VIN. This can usually be found in your driver’s manual, on a sticker on the window of the driver’s door. Sometimes it is sometimes on the dashboard above the steering wheel. When you find this 9 digit number you have to read the numbers from the fourth digit to the eight digit.
Can you tell axle ratio from Vin#?
Contact the dealer or the manufacturer (you could get a customer service number from the owners manual of the truck) and give them the VIN number and tell them you wish to know the axle ratio. They may only need certain digits from the VIN to determine, but it’s better to have them all in case.
How do I find out the axle ratio?
How to Calculate Axle Ratio. In order to calculate axle ratio, you would count the number of teeth on the ring gear as well as the number of teeth on the pinion. Divide the number of teeth on the ring gear by the number of teeth on the pinion in order to determine the axle ratio of a truck.
How do you find a gear ratio?
Divide one teeth count by the other. Now that you know how many teeth are on each gear, you can find the gear ratio relatively simply. Divide the driven gear teeth by the drive gear teeth. Depending on your assignment, you may write your answer as a decimal, a fraction, or in ratio form (i.e., x : y).
What is the axle ratio on a car?
An axle ratio or a gear ratio refers to the number of times the drive shaft rotates for every single rotation of the vehicle’s drive tires.
Where do I find my rear end gear ratio?
You can typically find your RPO code on driver side door panel or glove box. General Motors rear end differentials are referred to by the diameter of the ring gear, i.e. 7.5 inch, 8.5 inch, 10.5 inch. Our experts will help you find the correct ring and pinion set for your particular application. Give us a call at 800-216-1632 to get started.
How to determine the gear ratio of a Dodge Ram?
I am in the market to by a 14+ Laramie Longhorn but I want to make sure that the truck has 3.92 gears in it. Does RAM include this distinction in their VIN numbers so I can exclude trucks that I see listed that do not have the proper gears that I want? Thanks RAMSESSES likes this. Click the link below and go to “Equipment Listing” on the left.
Which is the best gear ratio for a car?
Tire diameter is the first consideration because styling and available space within the wheel opening dictate the size of tire / wheel combination that will be chosen for the car. The choice of a direct-drive (1to1) or overdrive (usually 30%) transmission will determine driveshaft RPM at cruising speed.
When you find this 9 digit number you have to read the numbers from the fourth digit to the eight digit. The digits between these numbers represent the gear ratio. If you do not find the numbers are appropriate for the gear ratio of your car then this is down to the fact not all VIN numbers display the gear ratio in their code.
Refer to the additional resources link to find the year of your Chevy truck and upload a file to help you decipher the code of your VIN. Contact the dealer or the manufacturer (you could get a customer service number from the owners manual of the truck) and give them the VIN number and tell them you wish to know the axle ratio.
You can typically find your RPO code on driver side door panel or glove box. General Motors rear end differentials are referred to by the diameter of the ring gear, i.e. 7.5 inch, 8.5 inch, 10.5 inch. Our experts will help you find the correct ring and pinion set for your particular application. Give us a call at 800-216-1632 to get started.
I am in the market to by a 14+ Laramie Longhorn but I want to make sure that the truck has 3.92 gears in it. Does RAM include this distinction in their VIN numbers so I can exclude trucks that I see listed that do not have the proper gears that I want? Thanks RAMSESSES likes this. Click the link below and go to “Equipment Listing” on the left.
The vehicle identification number (VIN) is a 17-digit code that is used to identify and track every automobile produced. Each number and letter contained within a VIN reveals information about the vehicle, such as the make, model, production year and engine size.
How to find the VIN number on a GM Truck?
Try this one out as well. http://www.compnine.com/vid.php Enter your VIN and it will tell you what RPO codes you have AND tell you what they are. Go to the glove box door, that’s where the build codes are located. Did you find the recommended reading relevant to this discussion?
How do you find out what your gear ratio is?
Count the number of teeth on the drive gear. One simple way to find the gear ratio between two interlocking gears is to compare the number of teeth (the little peg-like protrusions at the edge of the wheel) that they both have. Start by determining how many teeth are on the drive gear.
How to tell which gear ratio I have?
Part 3 of 5: Determining an approximation of your car’s gear ratio Place a visible mark on the driveshaft near the differential housing. Use the chalk or paint pen. Spin the driveshaft by hand. While spinning the driveshaft, count the revolutions by watching the markings, as well as counting the revolutions of the tire at the same Continue spinning the driveshaft.