Where are the BSM sensors on a Mazda 3?
The rear side radar sensors emit radio waves and detect the radio waves reflected off a vehicle approaching from the rear or an obstruction. The following systems use the rear side radar sensor. The rear side radar sensors are installed inside the rear bumper, one on the left side and one on the right side.
What does BSM off mean Mazda 3?
Blind Spot Monitoring
In the following cases, the Blind Spot Monitoring (BSM) OFF Indicator Light turns on and operation of the system is stopped. If the Blind Spot Monitoring (BSM) OFF Indicator Light remains illuminated, have the vehicle inspected at an Authorised Mazda Dealer as soon as possible.
What does BSM mean on a Mazda 3?
BSM（Blind Spot Monitoring） It alerts drivers to the presence of vehicles in the blind spot on either side by displaying an icon in the appropriate door mirror. If the driver indicates to change lanes with a vehicle in the blind spot, the icon flashes and a warning beep is sounded.
How does Mazda BSM work?
Mazda’s Blind Spot Monitoring (BSM) uses radars mounted in the rear bumper to detect vehicles approaching from behind and in the adjacent lane. It alerts drivers to the presence of vehicles in the blind spot on either side by displaying an icon in the appropriate door mirror.
Why is the I stop light flashing on my Mazda 3?
If the i-stop symbol illuminates on the dashboard in amber, despite continuously pressing the i-stop OFF switch and other when the bonnet is open and where the driver is not in the vehicle with the seat belt unfastened and the door open, there’s a fault with the system. The i-stop light flashing also indicates a malfunction.
What does the symbol mean on the Mazda 3 dashboard?
If the light remains on when the parking brake has been released, it indicates a malfunction. If the light flashes with the parking brake applied, it indicates a malfunction. 2. This symbol indicates a malfunction. Have vehicle checked if any of those faults occur.
Why does the steering wheel light up on a Mazda 3?
Often the fault is due to ABS wheel speed sensors. Description: The steering wheel and exclamation mark light up on the Mazda 3 dashboard in amber indicating a fault with the electronic power steering. Whilst operation of the steering wheel will remain unaffected, turning the wheel will feel heavy.
What does the Red thermometer symbol mean on a Mazda 3?
The red thermometer symbol comes on at start-up ans goes out shortly as normal. If it comes on when driving, it indicates that the engine coolant temperature is too high. Immediate action is required if this light comes on else engine components may be damaged. Other symptoms include a loss of power, knocking or pinging noise.
If the light remains on when the parking brake has been released, it indicates a malfunction. If the light flashes with the parking brake applied, it indicates a malfunction. 2. This symbol indicates a malfunction. Have vehicle checked if any of those faults occur.
When does the Mazda parking brake warning light turn off?
The warning light illuminates when the system has a malfunction. Have your vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer. The light illuminates when the electric parking brake (EPB) is applied with the ignition switched to START or ON. It turns off when the electric parking brake (EPB) is released.
Why is my I-stop light not working on my Mazda 3?
The i-stop light flashing also indicates a malfunction. See Mazda i-stop not working for possible reasons. The amber AT symbol on the Mazda 3 dashboard indicates a electrical fault with the Automatic Transaxle. Continued driving may cause damage to the transaxle. Have vehicle checked.
When do the warning lights flash on a Mazda CX 5?
The light flashes when the engine coolant temperature is extremely high, and illuminates when the engine coolant temperature increases further. Drive slowly to reduce engine load until you can find a safe place to stop the vehicle and wait for the engine to cool down. This indicates the possibility of overheating.