When to reset the oil change light on a Jeep Wrangler?
The Oil Change Light Reset Jeep Wrangler 2008 2009 2010 2011 will need to be performed after every oil change. If it is not reset the system will be unable to properly track when your next oil change is due. Below is the Oil Change Light Reset procedure for the Jeep Wrangler 2008 2009 2010 2011 .
How to reset the oil service Light Jeep Compass?
To turn off the message temporarily, press and release the Trip Odometer button on the instrument cluster. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure: Turn the ignition switch to the ON/RUN position, do not start the engine.
How to reset the oil change maintenance light?
Turn ignition to RUN position, don’t start the engine. fully depress the accelerator pedal slowly (3x) THREE TIMES within 10 seconds. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset Jeep Wrangler oil change required light ( 2008 )?
To turning off the Oil Life Light on 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 Jeep Wrangler Unlimited JK, conform to the following instructions: Turn the ignition key to position “RUN” without starting the engine, If your vehicle has a Smart key button, press the “Start” button once without touching the brake pedal.
How to reset the Jeep Wrangler service reminder light?
Quick and simple tutorial on how to reset the Oil change service maintenance reminder indicator light on Jeep Wrangler JK and JL from the year 2006-2007-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019-2020. Close all doors. Set the gear to the PARK position.
Turn ignition to RUN position, don’t start the engine. fully depress the accelerator pedal slowly (3x) THREE TIMES within 10 seconds. Turn the ignition off and then start the engine to verify the indicator has been reset.