When to replace the gauge cluster on a Jeep Cherokee?
This video shows the process for replacing a Jeep Cherokee instrument cluster / gauge cluster and correcting the mileage. This process can also be used for upgrading from the idiot light cluster to the full gauges. This procedure applies to all 1997-2001 Jeep Cherokees (XJ). This procedure should also apply to 1997-2001 Jeep TJ Wranglers.
How do I Reset my Jeep Grand Cherokee?
Leave all doors closed for about 16 seconds until the Vehicle Security Light on the instrument cluster stops flashing quickly. When the light flashes at a slower rate, this signifies that the system has been reset and rearmed. “2011 Jeep Grand Cherokee Owner’s Manual”; Chrysler Group LLC; 2010
Do you have to reprogram a Jeep Grand Cherokee?
Basic Info, If you change the keys, instrument cluster, PCM / Computer or immobilizer module, or skim antenna you will have to reprogram everything. The gauge cluster, PCM, and skim module must ALL AGREE and have all the same VIN programmed into them. The DBRIII is the scanner to use. 6 people found this helpful. 1 people found this helpful.
When do I need to replace my Jeep Grand Cherokee key?
Click HERE for programming information. 1994, 1995, 1996, 1997 Jeep Grand Cherokee non-transponder key replacement (P1794/Y157) 1992, 1993 Jeep Grand Cherokee non-transponder key replacement (P1793/Y155) Q: I lost my Jeep Grand Cherokee car keys, have no spare, and need a replacement.
This video shows the process for replacing a Jeep Cherokee instrument cluster / gauge cluster and correcting the mileage. This process can also be used for upgrading from the idiot light cluster to the full gauges. This procedure applies to all 1997-2001 Jeep Cherokees (XJ). This procedure should also apply to 1997-2001 Jeep TJ Wranglers.
How to correct the mileage on a Jeep Cherokee?
https://www.youtube.com/user/COrobotc… This video shows the process for replacing a Jeep Cherokee instrument cluster / gauge cluster and correcting the mileage. This process can also be used for upgrading from the idiot light cluster to the full gauges. This procedure applies to all 1997-2001 Jeep Cherokees (XJ).
When to do odometer correction for Jeep Cherokee?
This process can also be used for upgrading from the idiot light cluster to the full gauges. This procedure applies to all 1997-2001 Jeep Cherokees (XJ). This procedure should also apply to 1997-2001 Jeep TJ Wranglers. This procedure may work for 2007+ Jeep Wrangler JK. Loading…
What to do if your Jeep instrument is off?
If all the modules are unplugged and the BUS voltage is still off, separate the connector near the instrument cluster to test the BUS voltage straight out of the printed circuit board. If the voltage returns to normal, there’s a problem with the wiring harness.
Why is my instrument cluster not working on my Jeep XJ?
Went to start the XJ last night to load it onto the trailer to move it to my buddy’s shop and it would start, run for 3-4 seconds and then shut off. The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698.
What kind of CCD bus does Jeep use?
The same two-wire CCD BUS that Chrysler has been using for years on its cars is now being used on Jeeps and trucks, giving today’s Jeep Wrangler a new level of sophistication. If the instrument cluster doesn’t work, first determine which gauges don’t operate or if the whole cluster is down.
Why is the instrument cluster on my Jeep Cherokee not working?
The cluster has stopped working again too. I decided to hook my OBD2 scanner up figuring there was probably a code and I pulled the following: P1686, P1694, P1698. All of them have to do with the PCM not communicating with the instrument cluster.
Why does my XJ instrument cluster stop working?
I have a 1999 XJ – and the instrument cluster occassionaly stops working — with mine, if you push on it towards the bottom (nearest the odo reset) it will reseat and continue working for months. This is the second instrument cluster – I replaced the original due to the same issue you are experiencing with a used cluster from eBay $35
Why is the CPS on my Jeep Cherokee not working?
According tothe All Data the white w/ double black trace and the purple with brown trace wires are communication wires that go back to the PCM. Again, another reason why I don’t think that the CPS is bad.
Why are all the lights on my Jeep Cherokee not working?
The lights work (cel, seatbelt light, air bag, etc) but the actual gauges don’t work. Any ideas of where I should check? All the grounds seem to be connected, and I haven’t made any changes with wiring in regard to the cluster.
Is there an odometer error on my Jeep Cherokee?
If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: g14H0BmVV7mJPFPU)