When to replace spark plugs but still misfires?
It is also possible that one or more of the new wires or spark plugs is defective. When you perform a maintenance function and the car runs worse after, you have to review the maintenance function first. If you replace the wires, it is often also a good idea to replace the cap* and rotor* because they age similarly.
Why does my Buick not have a cap and rotor?
Your Buick doesn’t have a cap & rotor the ecm tells the coils when to fire. i would double check the wires to make sure correct wire going to the right plug. it cold be a crank sensor or a coil going bad the car has 3 coils on it. the coils how do they look where the wires conect to them is the post clean or is it pitted or corrioded
Why did my spark plugs blow after I changed them?
I have replaced my air filter, cleaned my throttle body, cleaned my MAF with MAF cleaner, and have changed my spark plugs. The problem started after I changed the plugs. I gaped them properly. They are Champion plugs. I did some reading and heard that this could be a vuccum leak, a blown head gasket, or bad wires.
When to replace a cap or rotor on a car?
When you perform a maintenance function and the car runs worse after, you have to review the maintenance function first. If you replace the wires, it is often also a good idea to replace the cap* and rotor* because they age similarly. (*A LeSabre still has those, I think).
What causes a spark plug to misfire in a car?
Ignition system components including the distributor, distributor cap, rotor, spark plug wire set, coil, or coil on plug boot, can create misfires if they have failed.
What should I do if my spark plug is misfiring?
I suggest first removing and checking the spark plug and swap in a new one or swap with cylinder next to it. This way the misfire moves to other cylinder then you know it was plug and replace it. If misfire still on number one then check for spark and injector pulse and replace injector or coil as needed. Was this answer helpful?
When to replace plugs and wires but still misfires?
Already replaced plugs/wires and going to replace 3 coils before sending it to a mechanic for diagnosis. Although there are a few mechanics who start throwing parts at a problem a real mechanic does the diagnosis and finds the real problem before replacing parts.
Your Buick doesn’t have a cap & rotor the ecm tells the coils when to fire. i would double check the wires to make sure correct wire going to the right plug. it cold be a crank sensor or a coil going bad the car has 3 coils on it. the coils how do they look where the wires conect to them is the post clean or is it pitted or corrioded
It is also possible that one or more of the new wires or spark plugs is defective. When you perform a maintenance function and the car runs worse after, you have to review the maintenance function first. If you replace the wires, it is often also a good idea to replace the cap* and rotor* because they age similarly.
When does an ignition module need to be replaced?
If the light blinks, the module is good. If the light is blank or constant, the module is bad. Before you attempt to replace the control module, you must rule out other ignition system components. The module is expensive and replacing it is a laborious process. Check the ignition coil for a spark.
What happens when an ignition module overheats?
Ignition modules that are overheating will soon completely cease to function and in the meantime can cause cause electrical shorts, engine stuttering, lower gas mileage, power loss, stalling, and gasoline odors in the exhaust.