When to remove the ECU from a Porsche 996?
If you need to re-flash or change the software on your 996 or 997, it may be necessary to remove the ECU from the car yourself. Please note, these instructions are only for the 1999-2012 model year Porsche 911 and sub-models.
How do you remove a Bose subwoofer from a Porsche?
With the front seats tilted forward, remove your shoes and step into the rear seat of your Porsche. To remove the subwoofer, you must first remove the vent covers. These are plastic pieces on either side of the subwoofer and say “Bose”. To remove them, very carefully pry the edges out with your finger. Then pull straight back to remove them.
How to change fuel pump in Porsche 911?
To overhaul such pumps, fill fuel inlet with carburetor cleaner (or methyl alcohol), Remove plastic plug above driving cog (back of pump housing) and insert the blunt end of a plastic biro or similar non-metallic object into the hole to contact the control rack.
What’s the best way to repair a Chevy Suburban?
Watch this video to learn how to replace and service the headlight assembly and bulbs on your 07-14 Chevy Suburban 1500. How to repair, install, fix, change or replace a broken, cracked, snapped or cut serpentine belton GMC Sonoma 4.3L model years 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, and 04. New Serpentine Belt from 1AAuto.com.
How to fix a plug in a Porsche?
1. Apply a light coat of Molykote HTP white paste to plug threads. 1. Apply a light coat of Molykote HTP white paste to plug threads. 2, Tightening torque 25 to 30 Nm 18 to 22 ft lb 1. Remove distributor cap, rotor and dust cover. 4. When installing, engage hole of pull rod in pin Pull off…
How do you remove odometer from Porsche 911?
STEP 1: Odometer Removal. Using a cloth covered screwdriver, gently pry the speedometer out from your dashboard. The rubber ring around the edge comes out too so get under that with the flat screwdriver and pry out. Do NOT use the neighboring gauge as a leverage point. The black trim ring is very easily scratched.
How do you remove air cleaner from Porsche?
Loosen and pull out air cleaner lower section clamping bolt in intake branch. Loosen air cleaner lower section bolts and remove air cleaner lower section to the right. 1.
Where is the speed sensor on a Porsche?
Pull out connector locking plate at sensor connectors in left side of engine compartment. Detach one or both black connectors. Remove reference or speed sensor mounting bolt using a 5 ‘ If the sensor is seized in the mounting bracket, remove bracket mounting bolts arrows .