When to get a VW Jetta airbag light reset?
If a collision occurs, however, both the seat belts as well as the airbags get activated by the airbag module. If your airbags have deployed you will need to get a VW Jetta Airbag light reset or repair service. You want to make sure your airbags, seatbelts, and all other parts of your VW Jettas SRS will work properly if an accident occurs.
When do you not need airbags in a Jetta?
For example, if the seat belt gets jerked, the airbag module triggers the seat belt to tighten and lock. This puts the person in their seat firmly. In a situation like this, the airbags are not needed.
What was the problem with the seatbelt latch on my VW?
The VW dealership wanted to charge around $600 to fix it. They told me the seatbelt latch was at fault because it had an intermittent connection issue, so I bought a new one and replaced it myself. The dealer then reset the fault code and the light turned off. However, as soon as a slid my seat to adjust it, the light came right back on.
How much does it cost to fix a Jetta airbag?
You want to make sure your airbags, seatbelts, and all other parts of your VW Jettas SRS will work properly if an accident occurs. A dealer is likely to tell you that you need to get a new airbag module, which can cost you upwards of $1,000 dollars.
What’s the airbag light code on a VW?
Fix your airbag light using tips in this video! I go over how to fix common airbag problems, and show solutions, that come up on Volkswagens. This is specifically for codes 01217 and 1218, both which indicate an error in the side air bags, both passenger and driver sides.
How can I reset the airbag light on my car?
Repeat the first few steps two more times and you will see that you have reset the airbag light on the dash. You will know that it is reset once the light comes on and turns off. It will not flash. And that’s how you reset an airbag light. If only all your DIY projects could be this easy.
Where is fuse for interior lights on 2006 VW Jetta-Fixya?
With key off press and hold the 0.0 button on the cluster. With your other hand turn the key on while still holding 0.0 button press the minute button 1 second and you will see the service reset. You can’t post conmments that contain an email address.
Why does the airbag malfunction illuminate in Volkswagens?
The warning light could illuminate after the car has been in a flood, or if there is corrosion in the car’s computer, so the airbag isn’t read properly. A water leak or something similar could cause the computer to corrode. What Should I Do If The Airbag Light Illuminates On Your Volkswagen?
Why does my airbag light keep turning on?
But there are other circumstances that may cause the SRS light to turn on, such as after the installation of a new radio or there a malfunction within the airbag system itself. After all repairs have been performed, you can reset the airbag light yourself using a handheld computerized tool purchased from an auto parts retailer.
Why does the airbag warning light illuminate in Volkswagens?
There are other problems that can cause an airbag warning light to illuminate. The warning light could illuminate after the car has been in a flood, or if there is corrosion in the car’s computer, so the airbag isn’t read properly. A water leak or something similar could cause the computer to corrode.
Are there any recalls on VW airbags?
In 2015, Volkswagen recalled 416,000 vehicles because of an airbag defect. The airbag defect was because of the failure of the clockspring, which is an electrical component in the steering system.
What to do if your airbag illuminates on the dash?
If your airbag or SRS light illuminates on the dash, you will need to take it to your auto repair facility right away, so it can be properly diagnosed by attaching a scanning device to a portal under the dash. The scan machine will reveal some codes that the mechanic will use to determine what the problem is with your vehicle.
Where is the button to turn off the airbag light?
This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars. This button is usually on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box.
Do you clear trouble codes before resetting airbag light?
Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.
Why does the SRS light light up on my Jetta?
The SRS light can also light up if the vehicle has been in an accident recently. An accident can be at different extremes, resulting in various safety features activating. For example, if the seat belt gets jerked, the airbag module triggers the seat belt to tighten and lock. This puts the person in their seat firmly.
What to do if your airbag light is not working?
Spray the connector plugs with an electronic cleaner and restart your car. If you can not find any problems there, you should really get an OBD2 scanner or let a workshop read the codes; otherwise, you will just guess the problem out of the dark. Founder, owner & main author of Mechanic Base.
When does the air bag light stop flashing?
The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!
Is it possible to reset the airbag light without a scanner?
Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem. In some older cars, though, it is possible to reset the airbag light without a scanner by removing the car battery terminals.
What does it mean when your airbag light is on?
It is surprisingly common for the airbag light (or SRS light) to illuminate. However, unfortunately, most people do not know what it indicates or how serious it can be. When your airbag light is on your instrument cluster, it means that there is an error in your airbag system.
What to do if your airbag light doesn’t go off?
If everything seems okay, but you can’t get the light to go off when the passenger seat is occupied, you can either replace the pad on your seat (expensive) or install a universal plug and play kit to bypass the occupancy sensor (only when you know you will not have kids in the front seat).
How can I tell if my airbag sensor is working?
To determine if the sensor is working okay, first check the “Passenger Airbag Off” indicator. If the seat is vacant, this light should be on. When the seat is occupied it should turn off implying that the airbag system is online and functioning. If the light is off when the seat is vacant or vice-versa, there could be a problem with the sensor.
How do you reset an airbag warning light?
Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. A no cost easy way to reset and fix your airbag SRS warning light.
What kind of charging system does a Jetta have?
I have a 2011 Jetta 2.5L. The ABS, traction, and airbag lights come on at the same time. When I take a long highway drive the problem goes away. Charging system?