When does the ABS light come on on a Santa Fe?
Your Hyundai Santa Fe’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the Santa Fe does not have Anti-Lock brakes, and the safety they provide. Your Santa Fe’s ABS system uses a system of sensors to determine wheel speed when braking.
Why are there three lights on my Hyundai Santa Fe?
23 people found this helpful. All three light illuminated on my 2011 Santa Fe so I changed my front right ABS speed sensor which was the cause of the lights, but the dash lights are still illuminated. Took it to the dealer and they said there is a short in the ABS system wiring harness.
Why is my brake light not working on my Santa Fe?
See all problems of the 2017 Hyundai Santa Fe . The abs system light has turned on. It happened before the above date, stopped coming on, and now has returned. I put brake fluid in the little compartment under the hood. The light goes out temporarily. Pep boys told me the problem is abs related.
Are there any problems with the 2013 Hyundai Santa Fe?
See all problems of the 2013 Hyundai Santa Fe . Abs light on, car won’t shift into gear, speedometer stopped working the day before, misc lights lit up on dash. Per dealer needs brake lamp switch. “takata recall” my abs lights are on and will not go off as well as the downhill light moving and stationary.
Your Hyundai Santa Fe’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the Santa Fe does not have Anti-Lock brakes, and the safety they provide. Your Santa Fe’s ABS system uses a system of sensors to determine wheel speed when braking.
23 people found this helpful. All three light illuminated on my 2011 Santa Fe so I changed my front right ABS speed sensor which was the cause of the lights, but the dash lights are still illuminated. Took it to the dealer and they said there is a short in the ABS system wiring harness.
See all problems of the 2017 Hyundai Santa Fe . The abs system light has turned on. It happened before the above date, stopped coming on, and now has returned. I put brake fluid in the little compartment under the hood. The light goes out temporarily. Pep boys told me the problem is abs related.
See all problems of the 2013 Hyundai Santa Fe . Abs light on, car won’t shift into gear, speedometer stopped working the day before, misc lights lit up on dash. Per dealer needs brake lamp switch. “takata recall” my abs lights are on and will not go off as well as the downhill light moving and stationary.
This happens when the car gets wet but also during dry times. The abs light has been coming on. When pressing on the brakes, the antilock braking system abs will activate whether slowing at 10 mph to and intersection or slowing at 50 mph in traffic.
What does the ABS light mean on a Santa Fe?
When on, it indicates that the Santa Fe does not have Anti-Lock brakes, and the safety they provide. Your Santa Fe’s ABS system uses a system of sensors to determine wheel speed when braking.
What does the brake light on a Santa Fe mean?
The brake light indicates that there is a problem with the physical braking system and that your Santa Fe is unsafe to drive. Yes, you can drive your Santa Fe with the ABS light on. Is it safe? It’s not as safe, especially when it’s raining, snowing, or the road surface is loose/uneven.
When does the TCS indicator go out in a Hyundai?
The indicators should illuminate when the ignition key is turned to ON or START but should go out after approximately three seconds. If the indicators do not illuminate, or the TCS or TCS-OFF indicator does not go out after 3 seconds, have the system checked by an authorized dealer.
Is there a warranty on a Hyundai Santa Fe?
The symptoms are the same as yours. Hyundai refused to do anything under warranty, depite the fact that the tone wheels are attached to the axle which is part of the powertrain. The dealer admitted that its a common issue as well. My 02 AWD Santa Fe has 191K miles.
What are the warning lights on a 2005 Hyundai Santa Fe?
Hyundai Santa Fe GLS: 000 miles..ABS..TCS-off, and 4wd warning lights I have a 2005 4wd Hyundai Santa Fe GLS 3.5L with 64,000 miles on it. Yesterday the ABS, TCS-off, and 4wd warning lights all came on at the same time. Any thoughts on what is causing this and how to fi… read more Jim Chill High School or GED 2 satisfied customers
What kind of ABS does a 2004 Hyundai Santa Fe have?
2004 hyundai santa fe abs & tcs dash lights ON. code “C2402”. how to fix or tunr off lights??? many thanks! Submitted:10 years ago. Category: Car Show More Show Less Ask Your Own Car Question Share this conversation Answered in 11 minutes by: 2/4/2010 Auto Mechanic: Mike V., Auto Service Technician replied 10 years ago
Why is my dash light not working on my Santa Fe?
This is a problem with the abs control unit or the abs pump. You should start by checking any fuses related to the abs. There are some under the hood and the dash. Sorry I do not have specific locations for you. If you find a blown fuse, replace it and this should turn the light out.
When do ABS and TCS Lights Come On?
I have a 02 4WD with 187 K miles . Both the ABS and TCS lights came on at the same time. I drove home and parked it over night. When I started it up in the morning the lights stayed off for about 10 miles and the came on again. any ideas and any estimates on a dealer fix?
Why are my tone wheels not working on my Santa Fe?
Its a very common problem on older Santa Fe’s. I had to replace both my front tone wheels on my 01 Santa Fe within 2 months of each other. The symptoms are the same as yours. Hyundai refused to do anything under warranty, depite the fact that the tone wheels are attached to the axle which is part of the powertrain.
The brake light indicates that there is a problem with the physical braking system and that your Santa Fe is unsafe to drive. Yes, you can drive your Santa Fe with the ABS light on. Is it safe? It’s not as safe, especially when it’s raining, snowing, or the road surface is loose/uneven.
Its a very common problem on older Santa Fe’s. I had to replace both my front tone wheels on my 01 Santa Fe within 2 months of each other. The symptoms are the same as yours. Hyundai refused to do anything under warranty, depite the fact that the tone wheels are attached to the axle which is part of the powertrain.
I have a 02 4WD with 187 K miles . Both the ABS and TCS lights came on at the same time. I drove home and parked it over night. When I started it up in the morning the lights stayed off for about 10 miles and the came on again. any ideas and any estimates on a dealer fix?
When does Hyundai Santa Fe traction control light come on?
Hyundai Santa Fe Traction Control Light is on Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Our certified mobile mechanics can come to you now.
Hyundai Santa Fe Traction Control Light is on Inspection at your home or office. Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM. Our certified mobile mechanics can come to you now.
What was the failure mileage on my Hyundai Santa Fe?
The failure mileage was 114,000. VIN tool confirms parts not available. Tl the contact owns a 2013 Hyundai Santa Fe. The contact stated while driving 30 mph, the abs warning light illuminated. The vehicle was taken to an independent mechanic and was informed that both abs modules needed to be replaced.
What are the brake problems on a 2007 Hyundai Santa Fe?
See all problems of the 2007 Hyundai Santa Fe . At low speeds the brakes lock up and the car goes into a jerking motion while approaching a stop light and while going into a store parking lot. The car is hard to steer and stop and the brakes must be depressed harder than normally required.
Why does my car have ABS at low speeds?
The vehicle came in with the complaint that the ABS could be felt working through the brake pedal at very low speeds. I carried out a short road test to verify the complaint and, sure enough, the ABS would cut in at very low speeds; in fact, just before the car came to a stop. Apart from this the car, including the ABS system, worked as normal.
What does the ABS do at 10 mph?
The above capture was taken at about 10 mph, with the brake pedal released and with no ABS intervention. Channel A (Blue) is monitoring RH rear WSS (wheel speed sensor) and channel B (Red) monitoring LH rear WSS.
What kind of sensor is used for ABS?
The system uses four variable-reluctance sensors, one attached to each corner hub. Touching very briefly on sensor theory; the output of this sensor is alternating current which is generated as a moving reluctor (a metal object, in this case our wheel rotor) passes into, through, and out of the sensor’s magnetic field.
Why do we use ABS instead of ASR?
We can conclude that we are dealing with the ABS strategy rather than ASR because, quite simply, the brake pedal is being applied during the fault; this eliminates ASR and gives one less aspect to worry about.
Why do ABS and stability lights turn on at the same time?
You may notice that both ABS and stability lights have turned on at the same time. That’s because the stability system depends on the ABS module to function properly. Therefore if there is a problem with the ABS module, the stability system will not function either.
What does it mean when your stability control light is on?
If the stability control light is on constantly, it means the system is disabled or it is not functioning properly. Below are a few simple things to check if your stability control light is on. On your dashboard, there is an ESC button that may have been pressed accidentally.
Why do my abs and ESC lights keep coming on?
Warning lights for ABS and ESC systems come on when vehicle is started and do not go off as they are suppose to. Appears to be an equipment failure. Lights stay on when vehicle in motion. Both lights came on while driving on a highway. Traction control light comes on. Prevents shifter to go into park.
What was the warning light on my Hyundai Santa Fe?
Tl the contact owns a 2013 Hyundai Santa Fe. The contact stated while driving 30 mph, the abs warning light illuminated. The vehicle was taken to an independent mechanic and was informed that both abs modules needed to be replaced. The vehicle was repaired. The contact stated that the failure recurred while the vehicle jerked forward while driving.
What is the ABS warning light on a Hyundai Santa Fe?
The contact owns a 2014 Hyundai Santa Fe. The contact stated while driving 55 mph, the abs warning light was illuminated. The contact received notification of NHTSA campaign number: 20v520000 (service brakes, hydraulic).
The indicators should illuminate when the ignition key is turned to ON or START but should go out after approximately three seconds. If the indicators do not illuminate, or the TCS or TCS-OFF indicator does not go out after 3 seconds, have the system checked by an authorized dealer.
The symptoms are the same as yours. Hyundai refused to do anything under warranty, depite the fact that the tone wheels are attached to the axle which is part of the powertrain. The dealer admitted that its a common issue as well. My 02 AWD Santa Fe has 191K miles.