When do I get a camshaft sensor code p0341?
Code P0341 is triggered when the camshaft sensor does not correlate to the position of the crankshaft. The crankshaft sensor should also be checked during the diagnostic checks for any problems that could cause the code to be received.
What does the p0341 OBD-II trouble code mean?
What the P0341 code means P0341 is an OBD-II generic code that says the engine control module (ECM) detected the engine camshaft position sensor circuit is not within specifications. The sensor pulses do not correlate to the pulses of the crankshaft sensor. What causes the P0341 code?
What is the diagnostic code for Camshaft Position Sensor?
Cost of diagnosing the P0341 code P0341 is a diagnostic trouble code (DTC) for “Camshaft Position Sensor Circuit Range/Performance”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation.
Why is my DTC p0341 CMP sensor not working?
Depending on year, make, and model, DTC P0341 or P0346 may have number of causes. Here are some of the most common. Faulty Sensor – If the sensor coil is open or shorted, then it will generate no signal. Poor Installation – A good CMP signal is highly dependent on placement.
What does a bad camshaft sensor do?
At low speeds a bad camshaft sensor will cause the car’s engine to stall. The engine may also experience an inability to turn over, resulting in the car not starting.
How much does it cost to replace a camshaft sensor?
Additional costs will be for the other engine parts that will support the camshaft and engine. A camshaft position sensor, which may be needed or replaced, can can cost $100 to $350 for the part.
Where is the cam position sensor located?
The camshaft position sensor is either located near the top of the engine, passenger-s side, or on the right side of the engine near the ignition coils. The camshaft position sensor is located on the engine near the camshaft pulley.
What does a cam position sensor do?
The CAM sensor or camshaft position sensor’s role is to signal the ECM the camshaft position. The crank and cam sensor operates in sync with eachother. The CAM sensor is frequently used in determining which injector to fire in a sequential system and for the COP or coil on-plug ignition systems coil firing event.
What does the p0138 code on a car mean?
Code P0138 means that your powertrain control module (PCM) has detected that the voltage signal from the rear O2 sensor is too high. What is an Oxygen Sensor? All modern cars have at least two oxygen sensors.
What is the fault code for a Honda Accord?
P1297 Electric Load Detector (ELD) Circuit Low Voltage P1298 Electric Load Detector (ELD) Circuit High Voltage P1300 Random Misfire P1324 Knock Sensor Power Source Circuit Low Voltage P1336 Engine Speed (RPM) Fluctuation Sensor Intermittent Interruption P1337 Engine Speed (RPM) Fluctuation Sensor No Signal
What is the p0341 Honda camshaft position sensor?
P0341 Honda Description. The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module(ECM) to control ignition and fuel injection.
What causes an OBDII code on a Honda?
P0341 HONDA Possible Causes 1 Faulty Camshaft Position Sensor 2 Camshaft Position Sensor harness is open or shorted 3 Camshaft Position Sensor circuit poor electrical connection 4 Faulty starter motor 5 Starting system circuit 6 Dead (Weak) battery
What to do when you get a p0132 code?
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P0132 code is 1.0 hour of labor.
What is the cause of the code p0138?
What Is the Cause of Code P0138? 1 Faulty O2 Sensor 2 Short to battery voltage in O2 sensor signal circuit 3 Corroded wiring 4 Fuel pressure too high 5 Engine coolant temperature sensor
Why does my Honda Element come on with p0341?
2002–2010 CR-V 2003–2010 Element A damaged or stretched cam chain, resulting from infrequent oil changes, can cause the MIL to come on with DTC P0341 (CMP sensor A and CKP sensor incorrect phase detected). Old oil causes the cam chain to wear quickly. As a result, it stretches beyond the point where the cam chain auto-tensioner can keep up.
What is the p0341 code for Camshaft Position Sensor?
P0341 code is triggered when the powertrain control module (PCM) detects a problem with the signal being sent by the camshaft position sensor. To learn more about how the ECM/PCM uses signals from the CMP, you can read our in-depth explanation here.
What the P0341 code means P0341 is an OBD-II generic code that says the engine control module (ECM) detected the engine camshaft position sensor circuit is not within specifications. The sensor pulses do not correlate to the pulses of the crankshaft sensor. What causes the P0341 code?
Depending on year, make, and model, DTC P0341 or P0346 may have number of causes. Here are some of the most common. Faulty Sensor – If the sensor coil is open or shorted, then it will generate no signal. Poor Installation – A good CMP signal is highly dependent on placement.
What is the OBD code for camshaft sensor?
P0341 is an OBD-II generic code that says the engine control module (ECM) detected the engine camshaft position sensor circuit is not within specifications.
What to do if your Honda has a p1009 code?
A stretched timing chain or damaged tensioner can also set the P1009 code. Before replacing the timing chain or tensioner, check engine oil level and condition. Replaced engine oil and filter with the factory recommended oil weight if necessary. The cost to diagnose the P1009 HONDA code is 1.0 hour of labor.
What causes a p0341 DTC on a Mustang GT?
Ford Trucks / Mustang GT – An alternator phase problem, such as a blown diode or open coil, may cause so much electrical interference that the CMP signal gets distorted, causing a P0341 / P0346 DTC to set, among others, in spite of there being no actual problem with the CMP sensor or wiring.
What does the p0341 Honda engine code mean?
The camshaft position sensor signal sent to the Engine Control Module(ECM) during the first few seconds of engine cranking is out of range. P0341 HONDA Possible Symptoms Engine Light ON (or Service Engine Soon Warning Light) Possible lack/loss of power Engine may stall while driving P0341 HONDA Meaning
Why do I have a DTC p0341 engine light?
As a result, it stretches beyond the point where the cam chain auto-tensioner can keep up. That extra chain slack causes the valve timing control (VTC) actuator and the exhaust camshaft sprocket to lag behind, and you wind up with DTC P0341.
What does the camshaft position sensor on a Honda do?
P0341 HONDA Description The Camshaft Position Sensor is an electronic device used in an engine to record the rate at which the camshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection.
Code P0341 is triggered when the camshaft sensor does not correlate to the position of the crankshaft. The crankshaft sensor should also be checked during the diagnostic checks for any problems that could cause the code to be received.
How long does it take to get a p0341 Volkswagen engine code?
Sometimes and in some models, low battery voltage or a weak starter can trigger a Camshaft Position Sensor code. The cost to diagnose the P0341 VOLKSWAGEN code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
What is the trouble code for the camshaft position sensor?
The automotive trouble code P0342 is one of several generic malfunction codes relating to the camshaft position sensor (CPS). Trouble codes P0335 through P0349 are all generic codes related to the CPS inferring different reasons for the failure.