What to do when your Mercedes SRS light goes off?
Unplug the scan tool and put the fuse panel cover back in place. Take your vehicle to your local Mercedes dealer to have repairs made, if needed. Repeat step 1 when you return home. Put the key into the ignition and turn it to the “Run” position. Wait until the SRS light turns off.
How do you reset the SRS light on a Silverado?
How to Reset the SRS Light on a Silverado. Turn the ignition off. Open the hood. Lift up on the tab on the side of the fuse cover to remove it. The fuse block is on the driver’s side of the engine compartment. Pull out the SRS fuse.
Where is the fuse for the SRS light?
In most models, this is fuse #40, located in the lower right corner of the fuse block. Turn the ignition switch to “ON” without starting the engine. Leave the ignition on for about one minute to allow the system a chance to reset. Turn the ignition off.
Why is the ESP light flashing on my Mercedes?
If pressing the ESP switch does not turn off the light, or if the ESP light is flashing, it means there is a problem with the ESP system on your Mercedes-Benz. This article will help you diagnose ESP problems on your Mercedes-Benz. Toggle ESP light on / off by pressing ESP button. Shown on SLK/Crossfire.
Why is the SRS light on my SL500 not working?
The most common fault is the SRS connections under the passenger seat, all the yellow plugs and 1 each side. often just disconnecting the plugs and spraying with a non drying switch cleaner will fix the problem, but once the lamp is on the car usually has to go onto STAR or other to turn the warning off.
What was the year of the Mercedes SL500?
216 with everything. 2002 SL500 with everything. 2009 SL500 with everything. Apparently the connections carry so little current that it dosnt take much to loose the current through the connection.
How to troubleshoot Mercedes Benz air suspension problems?
Learn how to troubleshoot Mercedes-Benz Air Suspension Problems. You decide to buy a Mercedes-Benz, maybe an S-Class, CLS-Class, R-Class, CL-Class or E-Class. One day you hear of other Mercedes-Benz owners having suspension problems. The next day you start having air suspension problems yourself.
What does a SRS restraint system malfunction sign mean?
I have a MY06 CLK350, a SRS Restraint system malfunction sign is on . May I know what it means and how to rectify this problem? Thanks Joe…
Where can I get a SRS code for my car?
These codes can be read and cleared using an OBD scan tool that you can purchase from your local auto parts retailer. Many auto parts stores will even let you use their OBD scan tool Vehicles free so that you will know what the problem is and possibly purchase parts from their store to fix the problem.
What does the SRS light on a car mean?
When you see the Supplemental Restraint Systems (SRS) light illuminated on the control panel of your Vehicles it means there is a problem with the airbags or the seatbelt tensioners. When there is a malfunction in the Vehicles codes are stored in the On-Board Diagnostics (OBD) computer.
Why is the SRS warning staying on on a Mercedes Benz?
Why is the SRS warning staying on? Here is a list of some of the most common problems with the SRS system on a Mercedes Benz. Seat Occupancy Senor in the passenger seat. Low voltage in the electrical system. Battery issue or charging. Seat belt latch. Damaged Wire Contacts at the doors. Defective, damaged or loose contact at the impact sensors.
Why is my Mercedes Benz starter not working?
Often times, when the starter is defective or seizes up it will blow out the fuse that protect the starter circuit. Another thing that you can try is to hit the starter with a rubber hammer a couple of times. Depending what kind of starter problems you have, the starter may work a few more times.
Why does my Mercedes not start when I charge the battery?
This Mercedes-Benz is not starting because of a low battery. In this case, what you need to do is trickle charge your battery using any of these 12 volt battery trickle chargers. If you need help read this article on How to charge a Mercedes-Benz the right way. Mercedes won’t start, and it’s not the battery.
How do you turn off the SRS light?
Keep the ends of the wire touching while you do this. The SRS light will flash on, and then disappear. Separate the wires immediately. The SRS light should come on again. Repeat Step 3 and the SRS light will blink twice and turn off. Unshort the two wires. This will cause the SRS light to blink twice.