What to do if your Santa Fe wont start?

If you have a model of Santa Fe which only has a key fob with start/stop button and no place to insert a key, then try placing your key fob as close to the start/stop button as you can and then start the vehicle. Tip: You can try starting your Santa Fe with its second key.

How does the key work on a Hyundai Santa Fe?

Press the unlock button (2) twice within 4 seconds and all doors and the tailgate will unlock. The hazard warning lights will blink and the chime will sound two times. After pressing the button, the doors will lock automatically unless any door is opened within 30 seconds.

Where is the start / stop button on a Hyundai Santa Fe?

– The engine start/stop button is in ACC or ON position. – Any door except the tailgate is open. 1 Close all doors, engine hood and tailgate. 2. Press the lock button (1). 3. The hazard warning lights will blink and the chime will sound once.

Why does my car not recognize my key fob?

Reasons your car won’t detect the key fob If you try to use the push-button start, but the dashboard message appears that a key is not detected, it could be that the battery inside the remote is dead. the remote itself is broken or no longer programmed to your car.

How to program key fob for 2011 Hyundai Santa Fe?

I just programmed a new remote start fob on my 2011 Santa Fee limited and it worked just great. Follow the steps below and see what happens. 1. Open the drivers side door 2. Turn the Vehicle ignition to the ON position (Do not start the vehicle) 3.

Where is the program button on a Hyundai Santa Fe?

Follow the steps below and see what happens. 1. Open the drivers side door 2. Turn the Vehicle ignition to the ON position (Do not start the vehicle) 3. Locate the disarm/program button. (look closely, it is located on the wiring harness just inside the lower dash. it could be located just inside the fuse cover.)

What is the 2011 Hyundai Santa Fe error code?

2011 Hyundai Santa Fe P200 error code is defined as “intake manifold runner performance bank 1”. Is this minor or major and what’s involved fixing the problem? … read more Disclaimer: Information in questions, answers, and other posts on this site (“Posts”) comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts.

What should the voltage of a Hyundai Santa Fe battery be?

The voltage of the battery on your Hyundai Santa Fe can be measured precisely with a multimeter. Before the test, the multimeter is set to the voltage range of the battery and connected to its plus and minus poles. Successful testing of the car battery, i.e. checking the voltage, usually results in values of approx. 12 to 13 volts.

Why is the fuel filter on my Santa Fe not working?

The fuel filter of your Santa Fe does not wear out like a mechanical part, but it gets clogged by dirt and airborne particles and clogs over time. The permeability of the filter drops, and so does the fuel pressure.

Is the 2011 Hyundai Santa Fe a good car?

While the 2011 Hyundai Santa Fe isn’t as high-tech or fun to drive as other 2011 midsize SUVs, the Santa Fe’s good safety score makes it stand out in its class. Test drivers said that the 2011 Hyundai Santa Fe is a good value, because compared with other midsize SUVs, it has more standard features and good gas mileage.

Why does my Hyundai Santa Fe not turn on?

I’m having the same issue on my 2012 Hyundai Santa Fe but the remote start used to work to turn on the heat/AC & just stopper engaging the heat a few weeks ago. The electrical is all functioning but the heat & heat panel only comes on when the key is in the ignition & turned to ON.

What kind of engine does the Hyundai Santa Fe have?

While the Santa Fe gets high marks for its practicality, other SUVs are more attractive, fun to drive and a bit more upscale. The five-seat Hyundai Santa Fe comes with either a 2.4-liter four-cylinder engine or a 3.5-liter V6.

Are there any recalls on the Hyundai Santa Fe?

THE UNITS ARE NOT WATER-TIGHT AND MOISTURE CAN SEEP INTO THE CONVERTER MODULE AND DEFEAT THE MODULE’S INTERNAL CIRCUIT PROTECTION. WITHOUT THE CIRCUIT PROTECTION, THE MODULE CAN OVERHEAT POSSIBLY RESULTING IN A FIRE. CURT MANUFACTURING WILL NOTIFY OWNERS AND REPLACE THE TOW PACKAGE WIRING HARNESS.

I would suggest you go to an auto parts store FIRST and pick up an inexpensive remote starter switch so you can clip the insulated ends onto the starter and stand with your face and hands clear of the engine while you push the button to try the starter.You should be able to try the starter by jumping out the 2 smaller studs.

Are there any problems with the Hyundai Santa Fe starter?

Hyundai Santa Fe owners have reported 20 problems related to starter (under the electrical system category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Santa Fe based on all problems reported for the Santa Fe.

How do you start a Hyundai Santa Fe?

You used to be able to at least make the start crank by crossing the 2 probes on the silinode. Locate the starter, follow the thick cable from the battery to the large stud on the starter solenoid. You should see 2 smaller studs on the solenoid. Be careful not to ground the studs to the engine block!

Why does my Hyundai Santa Fe have no crank?

Loose or corroded major electrical connections such as grounds or especially battery clamps are also common causes of no-cranks. Finally, a battery on its way out can cause this symptom. I went to car dealer last night.

What causes a Hyundai Santa Fe to not start?

The most common causes that hinders normal starting operation of your Santa Fe are dead key fob battery, dead 12v battery, corrosion on battery terminals, bad alternator, clogged fuel filter, broken starter, blown fuse, empty gas tank, immobilizer error or any fault in the electrical system. 1.

What kind of starter does a Hyundai Santa Fe use?

Hyundai Santa Fe Questions – The starter won’t even crank the engine. – CarGurus The starter won’t even crank the engine. I bought a new batt but that is not it.

What are the signs of a bad starter relay?

Broken or corroded wiring – Damaged or dirty wires to the battery or to the starter solenoid (or wires that are loose) can prevent sufficient power from reaching the starter. Alternator – The alternator is designed to power all of your car’s electrical systems when the vehicle is running. It also recharges the battery.

Why does my car say it has a bad starter solenoid?

Problems that might cause your car to act like it has a bad starter solenoid can include: Bad battery – If the battery voltage is low it will be unable to provide enough power to start your engine. Blown fuse – Sometimes the simplest explanation is the best one. A blown fuse in the starter circuit could be the cause of a no-start problem.

Hyundai Santa Fe Questions – The starter won’t even crank the engine. – CarGurus The starter won’t even crank the engine. I bought a new batt but that is not it.

When did my Hyundai Santa Fe start having issues?

I am also elderly and need a car that runs. My 2008 Hyundai Santa fe started having issues in Jan 2017. “No Start No Crank”. It would happen once a month or so and now it seems like it is once a day or every other day. I have 135,000 miles on it.

What does it mean when your Santa Fe won’t start?

The first and most common is when it won’t turn over. This just means that the engine doesn’t move when you turn the key. The second way that your Santa Fe won’t start is when the engine turns when you engage the starter, but it won’t fire and run on its own.

Navigation