What to do if your Harley Davidson battery is dead?
If your Harley’sbattery is dead then you have come to the right place! This motorcycle battery finder will help you select the right battery for your Harley.
How long does a Harley Davidson battery last?
Correctly maintained, a motorcycle battery should give you 48 months of use. However if you don’t ever charge it and rarely use the bike, it could be dead within 6 months.
Where is the battery located on a Harley Davidson Softail?
The battery chart. Your battery is mounted below/beside your seat. You’ll need to remove your seat and/or battery box access cover to gain access. There are many seat options available for the Softail, but most are removed similarly. Locate the mounting nuts or bolt (s) around and under the seat.
How often does a Harley Davidson battery drain?
Bike is under extended Warranty and they are saying SORRY we can’t fix it! Then they said to get a trickle charger, but I can’t don’t have access to plug it in! It discharges randomly, sometimes its 2 times in a week, sometimes 3 weeks it will stay charged.
If your Harley’sbattery is dead then you have come to the right place! This motorcycle battery finder will help you select the right battery for your Harley.
Correctly maintained, a motorcycle battery should give you 48 months of use. However if you don’t ever charge it and rarely use the bike, it could be dead within 6 months.
What happens when you disconnect the battery on a Harley?
Since disconnecting the battery on my harley it wont start. Bike still has power all lights etc since disconnecting the battery on my harley it wont start. Hey there!
What happens to the battery in a Harley Davidson Softail?
When a battery discharges, water takes the place of the electrolyte, which will not create the needed electrons for the bike to start and recharge. This is why it’s important to periodically charge your battery if it’s left unused for an extended period of time.
What to do if your fob battery is dead?
If the bikes signal lights flash rapidly when trying to start, insert a new 2032 fob battery. If the mcy. signal lights still flash rapidly when trying to start, turn the fob battery over and insert it correctly. The FACTORY installed alarm has it’s own battery, so it will work even if the bike battery is dead/cut/removed.
Where do you change the battery on a Harley Davidson?
Manuals can be found at the dealer and online.** In this video I replace the battery on a 2009 Harley Davidson Motorcycle. Most motorcycle batteries are located under the seat, so the first step to replace the battery is to remove the seat. Once the seat is removed you have access to the battery.
How many times has a Harley Davidson battery been replaced?
I turned the ignition back off, removed the key and the alarm set properly with key light flashing. Charged the battery up before taking it back to the dealers. This has happened 3 times before – the first time, the battery was replaced even though this wasn’t faulty.
How to turn off the FOB on a Harley Davidson?
Here’s how to do it!! 1. Select 5 digit code ( each digit being a 1 thru 9) and record it on the wallet card in the owners manual. 2. With an assigned FOB present, turn IGN key ON – OFF – ON – OFF – ON 3. Press Left turn signal switch 2 times. 4. Press Right turn signal switch one time and release.
What to do if your CB radio is not connected to the battery?
If your CB radio is not connected directly to the battery, make sure the fuse panel or extension wire it is connected to has a good connection to the battery. Some CB radios have the ability to dim or turn off the face lights, or even just the channel indicator. Make sure the lights are not switched off.
When to know if your motorcycle battery is operable?
If the battery drops below 10.8 volts, it is possible that the battery is no longer operable. Significant engine trouble can also cause the voltage to drop too far if it is making it difficult for the starter to turn the engine over. A good way to tell if this is happening is to check the battery cables for excessive heat.
If your CB radio is not connected directly to the battery, make sure the fuse panel or extension wire it is connected to has a good connection to the battery. Some CB radios have the ability to dim or turn off the face lights, or even just the channel indicator. Make sure the lights are not switched off.
How do you change the battery in a Harley Ultra Classic?
Changing them out on an Ultra Classic is straightforward and should take no longer than 20 to 30 minutes of your time. 1. Open the tour pack. Unscrew the seat fastener on the rear fender using a Phillips screwdriver. 2. Push the seat as far forward as possible while lifting the rear of the seat off the frame. 3.
Harley-Davidson Ultra Classic motorcycles are air-cooled, all-aluminum, 45-degree V-twin bikes with classic looks and styling. Their starting system is operated by a powerful 12-volt motorcycle battery. Although there have been wonderful advances in battery technology of late, these batteries typically have a lifespan of 18 to 24 months.
If the battery drops below 10.8 volts, it is possible that the battery is no longer operable. Significant engine trouble can also cause the voltage to drop too far if it is making it difficult for the starter to turn the engine over. A good way to tell if this is happening is to check the battery cables for excessive heat.
I turned the ignition back off, removed the key and the alarm set properly with key light flashing. Charged the battery up before taking it back to the dealers. This has happened 3 times before – the first time, the battery was replaced even though this wasn’t faulty.
When a battery discharges, water takes the place of the electrolyte, which will not create the needed electrons for the bike to start and recharge. This is why it’s important to periodically charge your battery if it’s left unused for an extended period of time.
How much weight does a lithium battery save on a motorcycle?
You’re looking at a weight saving of around 2kg and up to 5kg when you switch to a lithium motorcycle battery. MotoGP teams spend tens of thousands of pounds trying to find a 1kg weight saving and you can get a 2kg saving for around £70!
When did I replace the battery on my Street Glide?
I have a 2014 Street Glide Special with about 40k miles. I replace the main battery in February and then last week I took the bike for a ride. After stopping for a drink, the bike would not start.
What kind of battery do you need for a Harley Davidson?
If you want a long-lasting motorcycle battery or one that will survive winter, go for a Lithium battery. They take 3 to 5 times as long to lose their charge compared to a lead-acid battery. What’s the best battery for my Harley?
What causes a Harley Davidson to lose all power?
This can be caused by a loose neck or loose spokes (models w/spoke rims). Check your neck and tighten if nessacary. Also, can be caused by a bad wheel bearing. My first thought would be to load test the battery. 10v is low and if it he only gets a clicking when trying to start, that’s one sign of a bad battery.
How do you top up a motorcycle battery?
The only battery you’ll need to top up is a non-sealed (flooded) motorcycle battery. The acid itself doesn’t evaporate but the water-element of the acid mixture does, leaving a more concentrated solution. Top it up using distilled water (boil a kettle, let the water cool then use that). How long will a motorcycle battery last?
You’re looking at a weight saving of around 2kg and up to 5kg when you switch to a lithium motorcycle battery. MotoGP teams spend tens of thousands of pounds trying to find a 1kg weight saving and you can get a 2kg saving for around £70!
How to replace the battery in a Harley Ultra Classic?
How to Replace the Battery in a Harley Ultra Classic. 1 Step 1. Open the tour pack. Unscrew the seat fastener on the rear fender using a Phillips screwdriver. Push the seat as far forward as possible while 2 Step 2. 3 Step 3.
How long does an Ultra Classic battery last?
Their starting system is operated by a powerful 12-volt motorcycle battery. Although there have been wonderful advances in battery technology, these batteries typically have a lifespan of 18 to 24 months. Changing them out on an Ultra Classic is straightforward and should take no longer than 20 to 30 minutes of your time.
What should the voltage be on a Harley Davidson battery?
Turn the ignition and start the bike. The volts should not drop below 9.6 volts when the starter engages. Turn the throttle to rev the engine. As the engine is revved, the volts should go up to 13 or 14 volts. Identify the wires. The battery charge lead runs form the voltage regulator to the positive side of the battery.
Why is my Sportster not getting a spark?
A failing crank position sensor can cause a problem like yours. A bad sensor will sometimes fail when heat is introduced and begin working again once it cools. If/when this occurs again, turn off your fuel valve right away to see how much gas is in your float bowl. Open your gas cap and listen for a possible vapor lock condition.
How to fix a Harley Davidson Softail Sportster?
Style and Performance Upgrades Milwaukee Eight Touring Softail & Dyna Sportster Everyday Hog How-To Fix My Hog Projects M8 Cam Upgrade Cam Chain Tensioner Shoe Cam Gear Drive Conversion Carburetor Rebuild Electrical Systems Handlebars 101
A failing crank position sensor can cause a problem like yours. A bad sensor will sometimes fail when heat is introduced and begin working again once it cools. If/when this occurs again, turn off your fuel valve right away to see how much gas is in your float bowl. Open your gas cap and listen for a possible vapor lock condition.
Bike is under extended Warranty and they are saying SORRY we can’t fix it! Then they said to get a trickle charger, but I can’t don’t have access to plug it in! It discharges randomly, sometimes its 2 times in a week, sometimes 3 weeks it will stay charged.
How do you hook up a Harley Davidson battery?
Hook up the battery. With the Key in the OFF position, you should read 12 volts (battery volts) if the switch is GOOD and Zero volts if the switch is BAD. Now place the voltmeter across the RED and Red/Black wires. Hook up the battery.
Can a Dyna Super Glide battery be drained?
Discussion in ‘ Dyna Models ‘ started by flexo6, Sep 22, 2010 . I have a 2005 Dyna Super Glide with the side ignition. My battery was completely drained so I recharged the battery and when I go to put it back in as soon as I went to hook-up the negative terminal you can hear the fuel injection kick on…with the key off!
Why is the battery draining on my Harley Davidson?
My battery was completely drained so I recharged the battery and when I go to put it back in as soon as I went to hook-up the negative terminal you can hear the fuel injection kick on…with the key off! Im sure this is what is draining the battery and I think it is probably a faulty ignition switch.
What happens if you don’t charge your bike battery?
A by-product of this process is sulphation, so if you don’t keep your battery charged (either by riding the bike or using a battery charger), it will eventually get to a stage where the sulphation causes a short-circuit and you won’t be able to start your bike – or recover your battery.
What happens if the battery on a motorcycle dies?
That way you can be sure that you won’t be left stranded with a dead motorcycle battery. It’s important to use your motorcycle periodically to keep the battery in check. If a motorcycle battery is not used and just sits, it will lose it’s capacity to power your motorcycle.
What should the battery voltage be on a Harley Davidson?
With the Key in the OFF position, you should read 12 volts (battery volts) if the switch is GOOD and Zero volts if the switch is BAD. Now place the voltmeter across the RED and Red/Black wires. Hook up the battery. With the Key in the OFF position, you should read 12 volts (battery volts) if the switch is GOOD and Zero volts if the switch is BAD.
That way you can be sure that you won’t be left stranded with a dead motorcycle battery. It’s important to use your motorcycle periodically to keep the battery in check. If a motorcycle battery is not used and just sits, it will lose it’s capacity to power your motorcycle.
With the Key in the OFF position, you should read 12 volts (battery volts) if the switch is GOOD and Zero volts if the switch is BAD. Now place the voltmeter across the RED and Red/Black wires. Hook up the battery. With the Key in the OFF position, you should read 12 volts (battery volts) if the switch is GOOD and Zero volts if the switch is BAD.