What to do if you get a Nissan p1612 code?

What to do if you get a Nissan p1612 code?

If the problem occurs try disconnecting the car battery for about 30 minutes and then try starting the engine with a known registered key. If the problem persists you have to have the dealer erase the code and reprogram the keys again. The cost to diagnose the P1612 NISSAN code is 1.0 hour of labor.

What is a NAS malfunction p1612 and how can I Fix It?

ASE Master technician. 25+ years general automotive experience Verified Unfortunately this is not a home repair since it requires special tools and software that only the Nissan dealer has. P1612=Chain of ECM-IMMU error for the NATS system. NATS refers to the chipped key security system your car has.

What does chain of ECM-Immu error p1612 mean?

P1612=Chain of ECM-IMMU error for the NATS system. NATS refers to the chipped key security system your car has. This error is likely from a low voltage occurrence (battery weak) or a failed immobilizer control unit located at the ignition switch/lock.

If the problem occurs try disconnecting the car battery for about 30 minutes and then try starting the engine with a known registered key. If the problem persists you have to have the dealer erase the code and reprogram the keys again. The cost to diagnose the P1612 NISSAN code is 1.0 hour of labor.

What to do if your Nissan Pathfinder won’t start?

It is definitely worth it to use an OBDII scanner to check and see if the engine has thrown any trouble codes. It is highly likely that if your Pathfinder won’t start that there will be codes. These codes will tell you what the computer is saying is wrong with your engine.

ASE Master technician. 25+ years general automotive experience Verified Unfortunately this is not a home repair since it requires special tools and software that only the Nissan dealer has. P1612=Chain of ECM-IMMU error for the NATS system. NATS refers to the chipped key security system your car has.

Why is my Nissan club in no start mode?

P1614 merely indicates an issue with the anti-theft system because the IMMU cannot receive the key ID signal. To reset a NATS lock mode, a proper key must be cycled three times again to get the car to start, explaining why with even using the original key, it took three tries to start.

How is the binary code read on a Nissan Leaf?

The microcircuit inside the key is activated by a small electromagnetic field which induces current to flow inside the key body, which in turn broadcasts a unique binary code which is read by the automobile’s Engine Control Module ( ECM ).

What kind of trans fluid does Nissan Altima use?

2013 Altima transmission fluid is NS-3 ONLY. Do NOT use anything else. I have not personally seen any NS-3 yet but I know the NS-2 used on previous model year Nissans is more of a dark green and NOT red. I would guess that it looks similar. Certainly not red as other normal transmissions.)

Is there a dip stick on a 2013 Altima?

Strangely, the 2013 Altima Service Manual, page MA-41 thru MA-44 indicates there IS a dip stick and actually gives the procedure for using the stick to check your CVT fluid level. The procedure is the same as for other normal automatic transmissions. — but as been said – there is no dip stick – just a empty tube. Supposedly the dealer has a stick.

What are the common causes of code p1612?

Nissan and Infiniti both use anti-theft and immobilizer systems with this function. Components consist of: What are the common causes of code P1612? Occasionally, this occurs during the key registration procedure and the code remains stored.

What does the code p1612 on an Immu mean?

What Does Code P1612 Mean? This code signifies an interruption of communication between the ECM and the IMMU. As a result, the engine will not start. Often, it’s simply related to using the wrong or damaged key while other instances might point to an issue with the ECM or immobilizer.

What does Nats code p1610 stand for?

I later pulled codes P1610 and 1614. Both P1610 and P1614 indicate a NATS (anti-theft system) malfunction, yet P1610 is a resulting DTC from the “LOCK MODE” condition which is set for various NATS malfunctions or an improper key being used. It prevents the car from starting (for some period of time, even if the key issue is rectified).