What should I use to replace my Porsche Cayenne?
Here are a few of our tips: The Schwaben Locking Hose Clamp Pliers allow technicians to access the flat-type hose clamps located in hard-to-access areas. The pliers have a locking mechanism to hold clamps in the open position, making the removal and installation of clamps much easier.
Where are the fuel lines on a Porsche Cayenne?
There are several plastic hose connectors used on the engine. Squeeze the circular ring around each connector (arrows) to release the locking tabs and pull the hoses off. 16) Disconnect the two fuel line connections located at the front of the cowl tray, just above the rear of the intake manifold.
Where are the locking pins on a Porsche Cayenne?
11) The plastic pins have a locking tab at the bottom that you cannot see when looking down from the top with the Y-pipe installed on the engine. To remove the pins, align the small mark on the head of each lock pin with the external groove in the pinhole, as shown.
How is the seat belt secured on a Porsche Cayenne?
The seat belt bracket is secured to the seat with a metal retaining clip. Pull up on the thin outer clip (green arrow) and push the bracket downward. ThisPicture shows the part of the clip (green arrow) that needs to slide over the retaining bolt.
How do you replace the front wheel on a Porsche Cayenne?
Jack the car up and remove the wheel so that you can remove the center cap. A few taps from the handle of a mallet pushed it right out. Now, put the wheel back on, tighten the lug nuts, and put the car back on the ground. Have an assistant press hard on the brake pedal to lock the wheels from turning.
There are several plastic hose connectors used on the engine. Squeeze the circular ring around each connector (arrows) to release the locking tabs and pull the hoses off. 16) Disconnect the two fuel line connections located at the front of the cowl tray, just above the rear of the intake manifold.
What makes the coolant leak on a Porsche Cayenne?
The Coolant Pipes beneath the intake manifold have a tendency to leak, as they are made from plastic on the 2003-2006 model Cayenne Turbo and Cayenne S.
How do you remove lock pins from Porsche Cayenne?
To remove the pins, align the small mark on the head of each lock pin with the external groove in the pinhole, as shown. Then pull each pin straight up with pliers to remove it. Do not try to unscrew the pins or you will break off the lock tabs.