What should I do if my propane engine wont start?
If you are not using a tank regulator from USCarburetion make sure the regulator is low pressure (0.5 psi) if you have a low pressure kit and that it has a sufficient BTU rating. (10,000 Btu’s per hour per horsepower (ex. 10 hp = 100,000 BTU’s) 3.) Check that the pipe sizing is correct for your application.
How many turns does a propane engine take?
It has to be tested 1 turn at a time in each direction. Typically for Propane it will be 5-7 full turns out. Some engines may take more turns or less turns but 5-7 is a base starting point. Please do not be afraid of tweaking this adjustment to find the “sweet spot” where the engine performs the best.
Why is my propane tank not filling up?
1.) The first and most important step is to make sure that you are using a propane tank that has been refilled multiple times. (at least 4 times.) Tanks that have not been filled multiple times will have air trapped inside of them causing the fuel mixture in the carburetor to be too lean. 2.)
Why does my Chevy GUC have a power supply problem?
The repair guy said the problems with the clusters are most often a combination of stepper-motor failure and poor solder connections. The full rebuild replaces all steppers with new gen motors, lamps, and the troubleshooting fixes bad solder joints, and can fix power supply problems originating in the cluster.
What to do if your GMC has an electrical problem?
The full rebuild replaces all steppers with new gen motors, lamps, and the troubleshooting fixes bad solder joints, and can fix power supply problems originating in the cluster. Old ones like mine can also benefit from a re-flash with new software which GM provides.
What was the problem with my GMC pickup truck?
Specifically, the lawsuit claimed the active fuel management (AFM) system, piston rings and PVC system in these vehicles were faulty and caused excessive oil consumption, as well as premature spark plug degradation and engine malfunction.