What should I do if I accidentally disconnect my air bag?
This is a protective tab to stop people from accidentally disconnecting the air bag control module. Push down the tab on the center of the wiring harness plug, and pull out the harness. If you can’t push the tab down with your hands, use the flat-head screwdriver to provide extra force.
Where is the airbag sensor wire under the seat?
Definitely don’t want to have to deal with the tool (dealer). The connector is yellow, but square and plugged flush into the box under the seat. Definitely don’t want to have to deal with the tool (dealer). The connector is yellow, but square and plugged flush into the box under the seat.
Is there a way to make the airbag warning light permanent?
If all resistors are installed correctly you won’t get the permanent airbag warning light. You can then use heat shrink on each plug to make them permanent taking care not to apply to much heat and damaging the resistor.
How do you turn off the air bag light?
There is a 7mm bolt that holds the seat harness connector in, underneath the seat. Simply loosen it and the connector slides right out. When I reconnected it and fired up the van, the air bag light came on. I tightened the bolt some more and that turned the light off. Faroutride.com has a great tutorial on how to install the seat. Good luck!
Do you have to splice into airbag wires?
With a universal kit, you’ll have to splice into the wires, which I wouldn’t advise if you’re a novice or don’t have a wiring diagram in front of you. The last thing you want is wires crossed in an airbag system, especially if that determines whether or not the airbag deploys on a passenger.
This is a protective tab to stop people from accidentally disconnecting the air bag control module. Push down the tab on the center of the wiring harness plug, and pull out the harness. If you can’t push the tab down with your hands, use the flat-head screwdriver to provide extra force.
Definitely don’t want to have to deal with the tool (dealer). The connector is yellow, but square and plugged flush into the box under the seat. Definitely don’t want to have to deal with the tool (dealer). The connector is yellow, but square and plugged flush into the box under the seat.
Is it dangerous to have airbag warning light on?
If you’re anything like me, you hate warning lights on your dashboard because it’s your car’s way of telling you to get your shit together. One of the more dangerous lights you can have on is the airbag warning light. Here’s how to diagnose and fix it without the risk of near-face explosions. The work performed is on a 2004 Toyota Camry.