What should I do about my Hyundai Santa Fe oil control valve?
Hyundai Santa Fe: CVVT Oil Control Valve (OCV). Repair procedures – Engine Control System – Engine Control/Fuel System Hyundai Santa Fe: CVVT Oil Control Valve (OCV). Repair procedures Hyundai Santa Fe DM 2013-2018 Service Manual / Engine Control/Fuel System / Engine Control System / CVVT Oil Control Valve (OCV).
How to repair the CVVT in a Hyundai Santa Fe?
1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specification. 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the CVVT oil control valve connector (A).
When to change the oil on a Hyundai Santa Fe?
This automotive maintenance tutorial was specifically written to assist owners of the third generation (2013, 2014, 2015, 2016 and perhaps also the face lifted 2017 model year) Hyundai Santa Fe in changing the motor oil and replacing the oil filter on the Theta II 2.4 liter inline four cylinder GDI engine.
What does it mean when your Santa Fe has an oil leak?
If there is no oil visibly leaking from your Santa Fe’s engine, but the oil level is dropping, your engine is “using” oil. That means that it is finding its way into the combustion chamber and out of the tailpipe. Here are the most common oil leak symptoms:
Hyundai Santa Fe: CVVT Oil Control Valve (OCV). Repair procedures – Engine Control System – Engine Control/Fuel System Hyundai Santa Fe: CVVT Oil Control Valve (OCV). Repair procedures Hyundai Santa Fe DM 2013-2018 Service Manual / Engine Control/Fuel System / Engine Control System / CVVT Oil Control Valve (OCV).
1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3. Measure resistance between the OCV terminals 1 and 2. 4. Check that the resistance is within the specification. 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the CVVT oil control valve connector (A).
If there is no oil visibly leaking from your Santa Fe’s engine, but the oil level is dropping, your engine is “using” oil. That means that it is finding its way into the combustion chamber and out of the tailpipe. Here are the most common oil leak symptoms:
How often should you change the oil on a Hyundai Santa Fe?
It burns threw at about1-2 quart of oil every 2000 miles triggering the oil light to come on. Oil changes are done every 3000 miles with full synthetic always.
What to do if your Hyundai Santa Fe a / C is not working?
This way, you will know which services and Hyundai air conditioning parts to get to restore your A/C into the original working condition. Let’s proceed by taking a look at some of the most common Hyundai Santa Fe A/C problems: The A/C compressor is one of the most important components of any vehicle’s air conditioning system.
How does the climate control work on a Hyundai Santa Fe?
To regulate the temperature inside a Hyundai Santa Fe, the climate control system utilizes an ambient air temperature sensor (located outside the passenger compartment) and one or more in-vehicle sensors to measure the actual body temperature of your passengers and you.
Is the oil pressure switch on my Hyundai Santa Fe broken?
UPDATE! 3.5L V6 2011 Hyundai Santa Fe Oil Pressure Switch IT BROKE AGAIN! – YouTube If playback doesn’t begin shortly, try restarting your device.
Why does my Hyundai Santa Fe engine stall?
Engine would stall for 3 to 4 seconds when starting from a complete stop. The stalling problem never was resolved…the problem seemed to be that it did not do it on a constant basis and they claimed they could never get it to do it. Check engine light diagnosed as exhaust leak.