What should I do about my Honda Pilot wheel bearing?
I just turned 175k, and have been hearing noise from the right rear for a few weeks, and it was clearly a wheel bearing. I did not want to take the whole knuckle out and have it pressed out, so I bought a 23 piece Bearing and Hub puller kit off Ebay, and a slide hammer set.
How long does it take to replace Honda Pilot wheel?
The job should take 3 hours or less for the rear, I am guessing the fronts would be easier, as it takes less time to remove the Outer CV axle from the front. The Steps are: Remove wheel and loosen the castle nut while the parking brake is on.
How to remove CV axle from Honda Pilot?
Removed Flange bolt that connect lower arm B and the knuckle. This allows you to swing the knuckle down and out to remove the rear CV axle. After the CV axle was removed, I moved the knuckle back and loosely inserted the two bolts previously removed, so the knuckle was level and sturdy. 01 – Specialty tools ordered.
Can you replace front wheel bearings without press?
It is much easier with a press. This will work for many Makes and Models especially front wheel drive cars. Even some rear or 4 wheel drive will use the same concept. Make sure that you use good quality front wheel bearings so you do not have to do the job again in the near future. This is NOT a sponsored video. Everything is purchased by us!
The job should take 3 hours or less for the rear, I am guessing the fronts would be easier, as it takes less time to remove the Outer CV axle from the front. The Steps are: Remove wheel and loosen the castle nut while the parking brake is on.
I just turned 175k, and have been hearing noise from the right rear for a few weeks, and it was clearly a wheel bearing. I did not want to take the whole knuckle out and have it pressed out, so I bought a 23 piece Bearing and Hub puller kit off Ebay, and a slide hammer set.
Removed Flange bolt that connect lower arm B and the knuckle. This allows you to swing the knuckle down and out to remove the rear CV axle. After the CV axle was removed, I moved the knuckle back and loosely inserted the two bolts previously removed, so the knuckle was level and sturdy. 01 – Specialty tools ordered.
Do you need to remove ABS sensor on Honda Pilot?
There is no need to remove the ABS sensor. Removed Flange bolt that connect lower arm B and the knuckle. This allows you to swing the knuckle down and out to remove the rear CV axle. After the CV axle was removed, I moved the knuckle back and loosely inserted the two bolts previously removed, so the knuckle was level and sturdy.
There is no need to remove the ABS sensor. Removed Flange bolt that connect lower arm B and the knuckle. This allows you to swing the knuckle down and out to remove the rear CV axle. After the CV axle was removed, I moved the knuckle back and loosely inserted the two bolts previously removed, so the knuckle was level and sturdy.