What should coolant temp be on Jeep Cherokee?
P0128 is not a serious threat to the immediate drivability of your Cherokee. It should be noted that most modern fuel injected engines to like to run at 200+ degrees. Letting them run too cool can problems after an extended period of time.
What’s the normal coolant temp for an engine?
Oil temps +/- 10-20°F of the Water Temp are pretty normal, at least for the 5.7L… …very cold ambients or very low load and the engine just warmed up, the oil might be cooler than water temp, very high ambients, very heavy load and the engine has been running at operating temp for hours, the oil temp might be higher than water temp….
Why does my Jeep Cherokee have no heat?
Lack of heat – The biggest symptom of the P0128 trouble code in the Jeep Cherokee is going to be lack of heat. When the thermostat doesn’t bring the engine all of the way up to the proper operating temp, it means that the water going through the heater core isn’t as hot. This leads to less/no heat.
Why does the 3.6L have an oil cooler?
The 3.6L has an oil cooler though, and that surely would keep the oil temps closer the water temps than the 5.7L without one. But you never know, they probably added that oil cooler because the 3.6L runs it’s oil hotter than acceptable and the cooler is cheap and just enough to get the oil temps within acceptable limits….
What kind of coolant should I put in my Jeep Cherokee?
Adding engine coolant (also known as antifreeze) to your 2014 Jeep Cherokee is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter.
Can you put antifreeze in a 2014 Jeep Cherokee?
We are still working to obtain content for your car, however the video above is believed to have similar characteristics as your car. Adding engine coolant (also known as antifreeze) to your 2014 Jeep Cherokee is pretty easy. Engine coolant circulates through your engine to keep it cool in the summer but won’t freeze in the winter.
What’s the normal coolant temp for a 2015 Jeep?
190-200F is normal under light load. Up to 210F towing in heat with AC on. I’m a 2015 3.6 with heavy duty cooling. The 3.6 seems to come up to temp pretty quick according to the dummy gauge so I would suspect it wouldn’t even be an issue of short trips. It could also be an issue of maintaining proper temperature.
Oil temps +/- 10-20°F of the Water Temp are pretty normal, at least for the 5.7L… …very cold ambients or very low load and the engine just warmed up, the oil might be cooler than water temp, very high ambients, very heavy load and the engine has been running at operating temp for hours, the oil temp might be higher than water temp….
Why is my 2016 Jeep latitude not starting?
My 2016 Jeep Cherokee Latitude is suddenly not starting. When I push the light flash. I had AAA come out because I thought it was the battery but the battery is fine. We also simulated installing a new battery to reset the
Why is my 2016 Jeep Cherokee not starting?
Jeep Cherokee Questions – 2016 Jeep Cherokee won’t start/flashes check engine & oil/battery ligh… – CarGurus My 2016 Jeep Cherokee Latitude is suddenly not starting.
Why did my 2016 Jeep Cherokee not start?
Welp, you guessed it – Wednesday morning the car wouldn’t start and I randomly got a message saying the engine temp was too hot (mind you the vehicle had been sitting for 10 hours overnight in cool weather), Got it jumped and brought it to the dealer.
What’s the outside temp in the Jeep garage?
This morning was the coldest day so far. Temp at 39F, started Jeep, seats and wheel heat came on. This afternoon, temperature is stuck on 40F. Outside temperature is actually around 60F. Any solution before going to dealership?
Are there any problems with the Jeep Cherokee?
Curious how the 2016 Cherokee compares to other years? Check out our Jeep Cherokee overview to see the most problematic years, worst problems and most recently reported complaints with the Cherokee. Bump the Cherokee problem graphs up another notch.
My 2016 Jeep Cherokee Latitude is suddenly not starting. When I push the light flash. I had AAA come out because I thought it was the battery but the battery is fine. We also simulated installing a new battery to reset the