What kind of wiring do you need for a spotlight?

Just make sure that you use decent sized wires and a proper fuse holder for the connection of the power between the battery and the relay as well as the spot lights.

How can I mount a spotlight on my dashboard?

Mounting a spotlight on a light bar or otherwise attached bracket will also require no drilling or weather proofing. Mount the switch in the dashboard. Secure the switch on your dashboard in place by drilling a hole through the trim and sliding the switch through it from behind.

How do you connect spotlights to the ceiling?

Unscrew the rose base plate and push the cables back through the ceiling. If a single cable supplied the old rose, connect it to the new cable for the spotlights through a three-terminal junction box. If you find two or three cables, connect these to a four-terminal junction box.

How do you connect a fuse to a spotlight?

Now connect a wire between the batteries’ positive (+ / red) pole and pin 30 of the relay with the bakelite fuse holder in this wire, but do not insert the fuse yet. Pin 87 is connected to the positive wires of the spotlights. Pin 86 will be connected to the existing wire that feeds your high beam.

How to install spotlights on a custom car?

The article published in the October/November issue of Speed Mechanics is an excellent article, and must have helped many custom car enthusiast all over the US in installing their favorite set of spotlights. Special thanks to Ulf “Wolf” Christiansson and Stefan Elbrink. The magazine spend four and a quarter page on how to install the spotlights.

Where is the best place to mount a spotlight?

There are a number of places one could feasibly mount a spotlight, so choose a location that’s best for your purposes. Some common locations include on top of your side mirror or on the roof of the vehicle. You will need to identify the location you intend to mount the spot light first in order to cut the proper lengths of wire.

Can a spotlight be installed without a relay?

While some spotlights can be installed without the use of a relay, it is still recommended that you utilize one for optimal performance. Disconnect the battery. Before working with the electronic system in your vehicle, it’s important to disconnect the battery to avoid shocking yourself or doing any damage.

How do you wire a spotlight to a high beam?

To wire spotlights to work together with your high beams is not that difficult. The diagram below shows a simple wiring diagram for connecting spotlights to work together with your high beams. All you need is some wire and lugs, a 12V 4 Pole relay and two fuse holders with the correct fuses.

What are track lights and wire spotlights used for?

Track lights and wire spotlights have been in use both commercially and domestically for a number of years and they are very useful for focusing light into certain areas, with the added convenience of being able to position the spotlight exactly where you need it along the length of the track or wire.

What kind of Fuse do I need for 2 x 55 watt spotlights?

Thus 2 x 55Watt spots will use 110/12=9.2A. Thus, you can use a 15 Amp fuse for the main circuit. Firstly, connect the earth wire of the spotlights to the chassis of the vehicle at any existing screw using round lugs. Make sure the surface underneath the nut or bolt is not painted and the metal is bare to ensure proper connectivity.

What kind of wire do I need for a spotlight?

What type of wire do I need? Depending on how far you need to run the wire and what amperage the light is designed to operate at, it is recommended that you use a minimum of 12 gauge wire. In some applications, 10 gauge may be more appropriate. Thanks!

Which is the cheapest type of spotlight to use?

Halogen lights will be the cheapest and usually the dimmest. However, the bulbs are less expensive to replace when they blow out. LED lights can be extremely bright and cost more than most halogen spotlight applications. HID lamps are the most expensive, but offer the longest lifespan and often the brightest lights.

What kind of Fuse do you need for a spotlight?

You may need to run wire from the positive post to the in-line fuse holder if it can’t connect to it directly. Make sure there is a fuse in the fuse holder rated to withstand the amperage required to power the spotlight. This fuse will protect the spotlight and the relay from surges if there is an issue with your electrical system.

Is it illegal to use a spotlight while driving?

Installing a spotlight on your vehicle can improve your ability to see the ground when driving off road or increase visibility in low light conditions. It’s important to note that using a spotlight on public streets is illegal in many areas, so check the laws in your region before installing a spotlight for use while driving.

Just make sure that you use decent sized wires and a proper fuse holder for the connection of the power between the battery and the relay as well as the spot lights.

What to do if your lamp does not have a sharp point?

If your test lamp or leads does not have a sharp point, use a needle and stick it into the first wire. If the test lamp goes on then you have the correct wire. If not try the other wires as well. By only ‘pricking’ the wires, you will not really damage them.

Navigation