What kind of transmissions did Chevy trucks have in 1994?

A variety of transmissions were used on 1994 Chevrolet trucks. The transmissions included automatic models 4L60 and 4L80, the Borg Warner T5 manual and New Venture manual models 3500 and 4500.

Do you need a new transmission on a Chevy C3500?

Your Chevrolet C3500 is a massive and strong pick-up truck you rely on for hauling power and other heavy-duty work. When the transmission starts giving you trouble by slipping in and out of gear, you need to get a new automatic transmission for Chevrolet C3500 from AutoZone.

Is the 4L65E transmission a heavy duty truck?

Mega Monster Transmissions Engineered to Dominate, the 4L65E 4WDMega Monster transmission is tough enough to withstand the rigors of even the toughest heavy duty trucks, used for towing/hauling or off-roading. Questions? Call Us 8

How does a heavy duty transmission work on a 4×4?

Equipped with a Reprogrammed Automatic valve body, most units allow you to shift the vehicle into each gear change or, by placing it in the drive position, remain fully automatic. In either mode, you get a heavy duty shift that bangs through the gears giving you all the right to say “Eat My Shift!”.

How to identify Chevrolet GMC manual transmissions [ video ]?

After locating correct unit a link is supplied to provide detailed information on specific kit and parts that are available for your unit. Information is provided for General Motors 3 speed, 4 speed , 5 speed and 6 speeds manual transmissions. Cast iron case and extension housing with 4-bolt side cover.

What kind of transmission does a GMC Geo have?

Chevrolet/GMC/Geo Model Years Transmission Type Engine Type/Size Transmission Model Astro 1989-1992 TH700-R4/4L60 ASTRO/SAFARI 1995-2003 4 SP RWD/AWD V6 4.3L 4L60E AVALANCHE 2/3/2004 4 SP RWD/4X4 V8 5.3L 4L60E AVALANCHE 2/3/2004 4 SP RWD/4X4 V8 8.1L 4L80E

What kind of transmission does a GMC 3 speed have?

This is the only GM 3 speed with the same bearing front and rear. This transmission is found in performance applications. Cast iron, top-loaded case with side shift linkage. Fully synchronized with 36 tooth synchro rings. Same unit as Ford RAT except for a GM bolt pattern to the bell housing.

Why does my manual transmission not go into gear?

One such problem is manual transmission won’t go into gear when running. Any repair or replacement of the transmission components are inconvenient, time-consuming, and requires a handsome amount of money.

How to fix a GMC Sierra 1500 transmission?

Yes that’s has happen to two of my 93 Chevy Silverado 4×4 , 1 and 2 fine then free wheel in overdrive. Just change 1-2 – 3-4 solenoids first and if that doesn’t work change the computer per Ebay it’s the cheapest. Hope this helps JJD 36 people found this helpful. My buddy changed his distributor and cured the tranny problems.

What was the problem with my 1994 GMC Sierra?

My 94 gmc sierra k1500 speedometer was acting up,brake light came on and it wouldnt shift into 3rd or od without slipping out of gear. Changed speedo sensor and cured all problems. 6 people found this helpful.

Are there any problems with the GMC 4 speed transmission?

GMC vehicles with a 4-speed automatic 4L60E or 4L65E transmission can have intermittent or constant problems with selecting reverse. This will manifest itself as an inability to engage reverse gear while there are no issues with the engagement of other gears. There will be no other symptoms. The worn or faulty servo engages the reverse gear.

What kind of transmission does a 1994 GMC Sierra have?

I’ve got a 1994 GMC Sierra 4X4 5.7 I purchased from an older couple. It has been sitting a year. She said years ago they had tranny trouble; it would stay in low.

Where are the gear numbers on a GMC manual transmission?

Casting numbers on the case, cover or extension housing are 13-51 or 13-52. 5th gear (overdrive) is located at the rear of the transmission in the extension housing. The cluster gear is supported on both ends by cylindrical roller bearings. The number on the front cluster gear is DK55836. All five synchro rings are brass.

What to do with a GMC Sierra 1994?

Many people saved thousands of dollars by doing some technical service procedures for their GMC Trucks Sierra 1994 by themselves. The easiest type of technical maintenance is changing engine oil, axles oil, manual and automatic transmission oil. Changing break fluid in GMC Trucks Sierra 1994 is also is a simple task.

What kind of oil does GMC Sierra 1994 have?

GMC Trucks Sierra 1994 oil, coolant, transmission fluids capacities and cars specifications. Many people saved thousands of dollars by doing some technical service procedures for their GMC Trucks Sierra 1994 by themselves. The easiest type of technical maintenance is changing engine oil, axles oil, manual and automatic transmission oil.

Can you change break fluid in a GMC Sierra 1994?

Changing break fluid in GMC Trucks Sierra 1994 is also is a simple task. If you want to change engine oil, for instance, by yourself and save a couple of bucks you need to know how much this fluid engine oil is needed for GMC Trucks Sierra 1994.

Are there any problems with the Chevy 4.3 Vortec engine?

The 4.3 Vortec engines made from 1996-2002 (L35 and LF6) have been reported to have engine knock problems. In a properly functioning engine, fuel burns in even pockets instead of all at once. The pockets burn in even timing, in sync with engine cycles. Engine knock occurs when the fuel burns unevenly and out of sync with the engine cycles.

What kind of transmission does a 1994 Mustang have?

Replace your slipping, malfunctioning, or blown 1994-04 Mustang automatic transmission at Late Model Restoration. Get your SN-95 or New Edge Mustang running again with a new performance street/strip automatic transmission.

When did GM stop making their own transmissions?

Through the 1950s, all makers were working on their own automatic transmission, with four more developed inside GM alone. All of GM’s early automatic transmissions were replaced by variants of the Turbo-Hydramatic by the 1970s. 1968-1971 Torquedrive – Chevrolet ( Camaro and Chevy II, Nova.

What was the first 4 speed automatic transmission?

1980–1993 AOD —Ford’s first 4-speed automatic transmission, based on the FMX but with a torque-splitting feature. Ford Contour, Ford Escape, Ford Mondeo, Ford Probe, Mercury Cougar, Mercury Mariner, Mercury Mystique, Mazda Tribute, Mazda 626.

A variety of transmissions were used on 1994 Chevrolet trucks. The transmissions included automatic models 4L60 and 4L80, the Borg Warner T5 manual and New Venture manual models 3500 and 4500.

What kind of transmission does a Borg Warner have?

The Borg Warner T5 is a five-speed, “toploading” transmission with a square waffle-pattern aluminum casing. A removable top cover, allowing access to the transmission identifies a “toploader.” The T5 is illustrated on Motivegear.com’s Domestic Truck Transmission Guide.

How to check if a Dodge transmission is compatible?

Look up a trasnmission by model number and view vehicle applications and compatibility; or search for a vehicle by make or make and model to display applicable transmission (s). Select Make…

How can I find out what transmission my car has?

Look up a trasnmission by model number and view vehicle applications and compatibility; or search for a vehicle by make and model to display applicable transmission (s). Select Make…

Can a car be converted to a manual transmission?

Converting a vehicle with an automatic transmission to a manual is usually not particularly cost-effective, nor is it particularly easy. But sometimes, it’s simply the only way. If there’s a car you have your eye on that’s very rare, you may only get a chance to buy an automatic transmission variant.

Can you change the transmission on a Ford T-5?

The Ford versions of the T-5 will adapt easily to the earlier Ford three- and four-speed manual bellhousings by an adapter plate which enlarges the metric mounting bosses to 1/2-inch diameter, and adds 3/4-inch in spacing. Installation of a T-5 into an earlier Ford product is fairly easy, because of the bellhousing similarities.

Can a 4 cylinder transmission be used with a V-8?

Although the V-6 and 4-cylinder input shafts are 14-spline and will fit with the proper clutch disc, they are not recommended for V-8 applications. They do not have the higher torque ratings required for the V-8 units without upgrading the internals.

Where is the transmission filler in a 1994 GM pick up?

Access our free Manual Transmission Repair Guide for GM S-Series Pick-ups and SUV’s 1994-1999 through AutoZone Rewards. These diagrams include: Fig. 1: Location of the manual transmission filler and drain plugs

When did GM start making their own automatic transmission?

The GM Hydra-Matic was a success and installed in the majority of GM models by 1950. Through the 1950s, all makers were working on their own automatic transmission, with four more developed inside GM alone. All of GM’s early automatic transmissions were replaced by variants of the Turbo-Hydramatic by the 1970s.

Navigation