What kind of transmission fluid does a Mazda 2 take?
Mazda Original Oils are specially designed/tested for the respective engine….Lubricant Quality.
| Lubricant | Classification | |
|---|---|---|
| Manual transaxle oil | API Service | GL-4 |
| SAE | 75W-80 | |
| Automatic transaxle fluid | Mazda Original Oil ATF-FZ | |
| Brake/Clutch fluid | SAE J1703 or FMVSS116 DOT-3 or DOT-4 *1 |
What kind of transmission fluid does a Mazda 6 take?
Lubegard Synthetic Synthetic Transmission Fluid Dexron VI 1 Quart.
How much transmission fluid does a Mazda 2 take?
A 2011 Mazda2 equipped with the standard 4-speed automatic transmission is going to have a fluid capacity of 7.4 US quarts for a full fill up. You’re going to need to change out the fluid for this transmission between every 60,000 and 90,000 miles.
What is ATF MV?
ATF MV is a high performance fully synthetic, high quality automatic transmission fluid manufactured for multi-vehicle automatic transmissions.
What kind of transmission fluid does a Mazda use?
Mazda recommends Mazda ATF MV transmission fluid (also referred to as M5 ATF or Mazda V). Mazda MV ATF is not the same as Mercon V or Dexron automatic transmission fluid, a common misconception. Don’t use Mercon or Dexron transmission fluid on a Mazda, or you will start experiencing shifting problems after a few months.
What kind of fluid do you use for manual transmission?
• Recommended for all vehicles manufactured by General Motors & Ford (except those with CVTs, or those calling for Type F ATF) including Mercon LV • Recommended for many imports, including Toyota, Lexus, Honda, Acura, Nissan, Mazda, Mitsubishi, Hyundai, BMW, Volkswagen and Audi • Outperforms conventional Transmission fluids Part# VV324
What to do if your transmission fluid level is low?
If your Mazda transmission fluid level is low, you may experience shifting problems such as: Warm-up transmission. Drive your vehicle for at least ten minutes. This will allow your Mazda transmission fluid to warm up. Ensure your Mazda is parked on a level surface. Ensure the parking brake is set—shifter in Park. Do not turn off the engine.
How do you change the transmission on a Mazda?
Park your Mazda. Set the parking brakes. Move the shifter to Park position. Open the hood. Remove the dipstick. The automatic transmission dipstick is located next to the battery. Use a funnel to insert it into the dipstick tube. Add half a quart of Mazda Automatic Transmission Fluid (ATF). Recheck the fluid level.